Bambu High Temperature Plate (PEI)

Bambu Lab

4906b3c535d9e2276895679a6657ea0a_06ff90a4-0897-46aa-9722-736751de244f_800x

CHF 39.48*

Content: 1 Stück

Prices incl. VAT plus shipping costs

No longer available. Please contact our service hotline at the bottom of this page if you have any questions.

Product number: BBU-HIGH-TEMP-PEI

Product information "Bambu High Temperature Plate (PEI)"

Things to know before use

Before auto-leveling, it is necessary to repeatedly rub the nozzle in the special wiping area of the build plate to completely remove any residual material at the tip of the nozzle. The coating in the special-designed wiping area will gradually become worn over time. This is normal and does not affect print quality or nozzle lifetime, so there is no need to worry about any quality issues.

Bambu Lab recommends only using Bambu Lab official glue on the Cool Plate, and can not be held responsible for any damage caused to plates as a result of using third-party glue on build plates. The Bambu Dual-sided Textured PEI Plate is a flexible magnetic build plate with sprayed dual-sided PEI coating. During printing, the plate will provide excellent adhesion and easy print removal after cooling.

Fach:	design

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessory Items

Bambu Lab X1 Carbon 3D Printer

Product Features Multi Color & Multi Material Capability High quality printing with 7 μm Lidar Resolution Upgradeable and customizable flexibility High speed CoreXY with 20000 mm/s² Acceleration Dual Auto Bed Leveling What to Expect from the X1-Carbon 3D Printer 20 m/s² acceleration Micro lidar assisted bed leveling Active vibration compensation for better print quality Spaghetti failure detection and auto-pause Print resume after power outage Full advanced features of X1 3D printers

CHF 1,350.00*

Details

Similar Items

Bambu PLA Matte

Filament with Spool RFID for Intelligent Printing All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Recommended Printing SettingsDrying Settings (Blast Drying Oven) 55 °C，8 hPrinting and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant)Nozzle Temperature 190 - 230 °CBed Temperature (with Glue) 35 - 45 °CPrinting Speed < 300 mm/s Physical Properties Density 1.31 g/cm³Vicat Softening Temperature 63 °CHeat Deflection Temperature 58 °CMelting Temperature 163 °CMelt Index 39.4 ± 3.2 g/10 min Mechanical Properties Tensile Strength 30 ± 5 MPaBreaking Elongation Rate 14.8 ± 4.2 %Bending Modulus 2360 ± 250 MPaBending Strength 53 ± 6 MPaImpact Strength 19.2 ± 3.7 kJ/m²

From CHF 29.10*

Details