Electro-Fashion Deluxe E-Textiles Pack

2728_large_deluxe_e_textiles_starter_pack_front_packagedfZnxnsfSSx491

CHF 29.09*

Available. If the available stock is exceeded, no additional units of this item can be added to the cart. If you have any questions, please contact the service hotline at the bottom of this page.

Product number: KIT-2728

Product information "Electro-Fashion Deluxe E-Textiles Pack"

This deluxe E-Textiles pack is a great way to get a little more involved with E-Textiles. We have selected a number of products from our Electro-Fashion range, including three of our ultra-slim LEDs and two separate power boards. There are enough components for you get started immediately to create some eye catching E-Textiles projects, the only limit is your imagination.

Features:

Everything you need to complete three projects
Enough Electro-Fashion components to get started immediately with E-Textiles
Full instructions for assembly
Great project ideas and tutorials

Contents:

2 x Sewable Blue LEDs
2 x Sewable White LEDs
2 x Sewable Sakura (lilac) LEDs
2 x Blue Flashing LEDs
2 x Green Flashing LEDs
2 x White Flashing LEDs
1 x Slide Switch
1 x Push Switch
2 x CR2032 Coin Cell Batteries
1 x CR1220 Coin Cell Battery
1 x 6m Conductive Thread
1 x Coin Cell Holder
1 x Miniature Coin Cell Holder
1 x Switched Coin Cell Holder

Dimensions:

Ultra Slim Sewable LED Length: 15mm
Ultra Slim Sewable LED Width: 6.5mm
Ultra Slim Sewable LED Height: 2.7mm
Slide Switch Length: 18mm
Slide Switch Width: 8.5mm
Slide Button Switch Height: 4mm
Push Button Switch Length: 18mm
Push Button Switch Width: 8.5mm
Push Button Switch Height: 3mm
CR1220 Battery Height: 2mm
CR1220 Battery Diameter: 12mm
CR2032 Battery Height: 3.2mm
CR2032 Battery Diameter: 20mm
Sewable Coin Cell Holder Length: 34mm
Sewable Coin Cell Holder Width: 20mm
Sewable Coin Cell Holder Height: 4.5mm
Sewable Miniature Coin Cell Holder Length: 22mm
Sewable Miniature Coin Cell Holder Width: 12.5mm
Sewable Miniature Coin Cell Holder Height: 4mm
Switched Coin Cell Holder Length: 22mm
Switched Coin Cell Holder Width: 12.5mm
Switched Coin Cell Holder Height: 4mm

Requires:

Scissors
Needles

Bildungsstufe:	Lower Primary, upper primary
Fach:	design, design, e-Textiles

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessory Items

LilyPad Rainbow LED (6 Colors)

This is the LilyPad Rainbow LED strip, with seven LilyPad LEDs that are still attached to one another, letting you snap LEDs apart at your leisure to sew into clothing or whatever else you can dream up. The LilyPad Rainbow LED features seven individual LEDs in six unique colors (Red, Blue, Green, Yellow, Pink, and White). Text has been added to the back of each board to indicate its color. Due to popular request, we have included two white LEDs instead of just one. Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education in e-textiles.

CHF 7.85*

Needle Set

This set of sewing needles is a must-have when stitching together your next e-textile project. Each envelope contains three 48mm, 1.23mm thick needles and two smaller 39mm, 0.67mm thick needles. The eye of each size needle is large enough to easily thread with our conductive thread.

CHF 322.00*

Lilypad Conductive Thread Bobbin

This is 12 meters of smooth conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable electronics without the upfront cost of buying an entire spool of thread. Close to 40 feet of thread is enough to get a simple design stitched onto your shirt, backpack or hat. What sets this thread apart from the other conductive thread that we carry is the fact that it’s actually spun from 12UM stainless steel fiber making it incredibly smooth and without the loose hairs seen on other bobbins. This means that while it may not be easy to solder to, because it’s stainless, it also won’t burn up when you touch it with a soldering iron. Suitable for hand or machine sewing (as a bobbin thread). We’ve had no trouble using it for close, tight connections, but if you’re worried, waxing the thread should keep it manageable!

CHF 9.95*

LilyPad Coin Cell Battery Holder - Switched - 20mm

Sure, your flashing, chip-tune playing T-shirt is really cool at the party… but at some point you need to turn it off. And yes, you could just pull the battery, or maybe you’ve even sewn a LilyPad slide switch in-line. Wouldn’t it be nice if there was just a switch on the battery? Well, look no further. This LilyPad Coin Cell Battery Holder has a small slide switch installed on the board, in-line with the power so you can shut off your project and save batteries. This slide switch is the same as on the LilyPad Slide Switch Board, so it’s not easy to accidentally turn off or on. Just like the original Coin Cell Battery Holder, this simple board holds a 20mm coin cell battery (such as a CR2032) and gives you four connection points (two positive and two negative) for sewing into your project. Additionally, we have strengthened the battery connector on this board in order to ensure that it doesn’t accidentally pop off. Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles.

CHF 4.25*

Details

Similar Items

LilyPad Sewable Electronics Kit

The LilyPad Sewable Electronics Kit lets you explore the wonderful world of electronic sewing (e-sewing) and e-textiles through a series of introductory projects using the LilyPad system. You’ll learn how to sew basic circuits to light up LEDs, control them with buttons and switches and even experiment with a pre-programmed LilyMini circuit that reacts to ambient light levels. In addition to LilyPad LEDs and battery holders, the kit comes with two LilyPad ProtoSnap boards that let you explore the circuit before you sew the pieces into a project. The full-color LilyPad Sewable Electronics Kit Guide (included) contains step-by-step instructions for using LilyPad pieces to create four complete sewable circuit projects with conductive thread. Easy-to-follow diagrams and troubleshooting tips make this a great introductory resource for crafters and creatives. LilyPad is a wearable technology developed by Dr. Leah Buechley and cooperatively designed by Dr. Buechley and SparkFun. Each LilyPad component was creatively constructed with large sew tabs to allow for stitching into clothing. Various input, output, power and sensor boards are available. They’re even washable! Note: A portion of this sale is given back to Dr. Buechley for continued development and education in e-textiles. Sewable Electronics Projects: Project 1: Glowing Pin Project 2: Illuminated Mask Project 3: Light-Up Plush Project 4: Night-Light Pennant

CHF 185.00*

Details