BBC micro:bit Board Only

CHF 8.00*

Content: 1 Stück

Available. If the available stock is exceeded, no additional units of this item can be added to the cart. If you have any questions, please contact the service hotline at the bottom of this page.

colour

Blau

Orange

Rot

Yellow

Product number: PMR-KBOT003

Product information "BBC micro:bit Board Only"

The BBC micro:bit is a pocket-sized codeable computer with motion detection, a built-in compass, LED display, and Bluetooth technology built in.

It measures 4cm by 5cm, is available in a range of colours, and designed to be fun and easy to use. It can be coded with something simple in seconds – like lighting up its LEDs or displaying a pattern – with no prior knowledge of computing.

It also connects to other devices, sensors, kits and objects, and is a companion to Arduino, Galileo, Kano, littleBits and Raspberry Pi, acting as a spring board to more complex learning.

Each element is completely programmable via easy-to-use software on a dedicated website (www.microbit.co.uk) that can be accessed from a PC, tablet or mobile.

Bildungsstufe:	upper primary
Fach:	Robotics/ Microcontrollers, informatics, informatics

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessory Items

BBC micro:bit Inventor's Kit

Get more from the BBC micro:bit with Kitronik's incredible Inventor's kit! The simple way to learn about creating circuits and code. Please Note: BBC micro:bit is NOT included. The Kitronik Inventor's Kit for the BBC micro:bit is a great way to get started with programming and hardware interaction with the BBC micro:bit. This Inventor's Kit contains everything you need to complete 10 experiments including using LEDs, motors, LDRs and capacitors. To get you off to a flying start, Kitronik have included an easy to follow tutorial book which guides you through everything you will need to know about programming the BBC micro:bit. You don't need any experience with programming as the tutorial book will guide you every step of the way. You'll be programming and creating circuits in no time! The Kitronik Inventor's Kit for the BBC micro:bit provides a fantastic way of learning how to construct and control electronic circuits. The BBC micro:bit has a selection of pins that are located on the bottom edge of its PCB (see datasheet below for details). By using the specially designed Edge Connector Board for the BBC micro:bit in conjunction with the breadboard (see below), it is easy to use these pins to connect additional components to the BBC micro:bit. No soldering is required and you can build your first circuit in minutes! Note: This kit requires assembly. Features: No soldering required - build your first circuit in minutes! Make 10 experiments included in the provided step-by-step tutorial book. All parts are included to conduct the 10 experiments (listed below). Breaks out 21 accessible pins from the BBC micro:bit using the Edge Connector Board for the BBC micro:bit (included). Small Prototype Breadboard included for fast prototyping. All of the experiments included in this booklet (listed below) are based on the Microsoft BlockEditor and Microsoft TouchDevelop editor software. Experiments included in the tutorial book: Experiment One: Say 'Hello' to the BBC micro:bit. Experiment Two: Using an LDR & analog inputs. Experiment Three: Dimming an LED using a potentiometer. Experiment Four: Using a transistor to drive a motor. Experiment Five: Using the accelerometer to control motor speed. Experiment Six: Setting the tone with a piezo buzzer. Experiment Seven: Wind power. Experiment Eight: Making a game using the compass. Experiment Nine: Capacitor charge circuit. Experiment Ten: Using an RGB LED. Contents: 1 x Perspex Mounting Plate. 1 x Potentiometer & Finger Adjust Spindle. 2 x Plastic Spacer 10mm. 1 x Sticky Fixer for Battery Pack. 1 x Small Prototype Breadboard. 1 x Terminal Connector. 4 x Push Switch. 1 x Motor. 1 x Transistor. 2 x Red 5mm LED. 2 x Orange 5mm LED. 2 x Yellow 5mm LED. 2 x Green 5mm LED. 1 x RGB 5mm LED. 1 x Fan Blade. 5 x 2.2KΩ Resistor. 5 x 10KΩ Resistor. 5 x 47Ω Resistor. 1 x Edge Connector Breakout Board for BBC micro:bit. 1 x Miniature LDR. 10 x Male to Male Jumper Wires. 10 x Male to Female Jumper Wires. 4 x Self-adhesive Rubber Feet. 1 x 470uF Electrolytic Capacitor. 1 x Piezo Element Buzzer. 4 x Pan Head M3 Machine Screw. Requires: 1 x BBC micro:bit. 1 x Phillips Screwdriver. 1 x Terminal Block Screwdriver. 1 x Micro USB Cable.

From CHF 48.18*

Details

Similar Items

Kitronik MI:pro Protector Case for the BBC micro:bit V1 & V2

This Kitronik MI:pro Protector Case for the BBC micro:bit has been designed to work with both the original micro:bit V1 and the new micro:bit V2 and continues in the traditions of our earlier cases. The cases are designed to keep the micro:bit safe, fully useable, and to offer the freedom of not being tethered to a computer. The case is available in 4 different colour options. They are; Clear, Blue, Green, and Orange. The colours don't only look great, they can be used to differentiate between different people's cases. Handy! All of the cases are identical in all other regards. If a battery holder is attached to the back it can also can be stood neatly on a desk and it also features large and easy to read labels for the A and B buttons. This case provides full access to the bottom pins on the BBC micro:bit so the Edge Connector Breakout Board for BBC micro:bit can be used. One of the key features of the micro:bit is its physical size and this case has been designed with that in mind. It's as compact as we could make it, whilst still offering protection for the micro:bit. The case is also supplied with a sticky fixer pad so that you can attach a battery holder to the rear of the case, such as can be found in our BBC micro:bit Starter Kit. When a battery holder is used, micro:bit projects can go wherever you go. Even with a battery holder attached, the case is still palm-sized and portable.

CHF 5.19*

micro:bit Enclosure (LEGO Compatible)

micro:bit LEGO enclosure is a protective case for micro:bit. It is specially designed by DFRobot, made by ABS material. It reserves A-B buttons and microLbit RST button, provides comprehensive protection. FEATURES Reserved A-B buttons and RST Button ABS transparent material LEGO compatible SPECIFICATION Size: 57.5x34.5x14.4 mm/ 2.26x1.36x0.57 inches Weight: 20g

CHF 41.00*

Details