Inventor's Kit for the BBC micro:bit

CHF 285.00*

Content: 1 Stück

Available. If the available stock is exceeded, no additional units of this item can be added to the cart. If you have any questions, please contact the service hotline at the bottom of this page.

Product number: KIT-5603

Product information "Inventor's Kit for the BBC micro:bit"

Bitte beachten Sie: BBC micro:bit ist NICHT enthalten.

Das Kitronik Inventor's Kit für den BBC micro:bit ist der ideale Einstieg in die Programmierung und Hardware-Interaktion mit dem BBC micro:bit. Dieses Inventor's Kit enthält alles, was du für 10 Experimente brauchst, einschließlich der Verwendung von LEDs, Motoren, LDRs und Kondensatoren. Damit du sofort loslegen kannst, haben wir ein leicht verständliches Tutorial-Buch beigelegt, das dich durch alles führt, was du über die Programmierung des BBC micro:bit wissen musst. Sie brauchen keine Erfahrung mit dem Programmieren, da das Buch Sie bei jedem Schritt anleitet. Der BBC micro:bit verfügt über eine Reihe von Pins, die sich an der Unterseite der Platine befinden. Wenn Sie unser speziell entwickeltes Edge Connector Board in Verbindung mit dem Breadboard verwenden, können Sie diese Pins leicht nutzen, um zusätzliche Komponenten an den BBC micro:bit anzuschließen.

Features:

Führe 10 Experimente durch, die in der mitgelieferten Schritt-für-Schritt-Anleitung enthalten sind.
Alle Teile sind enthalten, um die 10 Experimente durchzuführen (unten aufgelistet).
Bricht 21 zugängliche Pins des BBC micro:bit mit Hilfe des Edge Connector Boards für den BBC micro:bit (im Lieferumfang enthalten) heraus.
Kleines Prototypen-Breadboard für schnelles Prototyping enthalten

Inhalt:

1 x Montageplatte.
1 x Potentiometer - Vertikaler Typ (Fingerjustierung) 100K.
1 x Fingereinstellspindel.
2 x Kunststoff-Abstandhalter 10mm.
1 x Klebeband für Batteriepack.
1 x Kleines Prototypen-Brett.
1 x Klemmenanschluss.
4 x Druckschalter.
1 x Motor.
1 x Transistor.
2 x Rote 5mm LED.
2 x Orange 5mm LED.
2 x Gelbe 5 mm LED.
2 x Grüne 5 mm LED.
1 x RGB-LED, 5 mm.
1 x Lüfterflügel.
5 x 2.2KΩ Widerstand.
5 x 10KΩ-Widerstand.
5 x 47Ω Widerstand.
1 x Edge Connector Breakout Board für BBC micro:bit.
10 x Stecker auf Stecker Jumper Drähte.
10 x Überbrückungsdrähte von männlich zu weiblich.
1 x 470uF Elektrolytkondensator.
1 x Piezoelement-Summer.
4 x Pan Head M3 Maschinenschraube.

Betriebsystem:	Mac OSX, Win
Bildungsstufe:	Diploma/High School, Diploma/ Vocational/ Uni, Middle years
Fach:	Robotics/ Microcontrollers, informatics
Fachbereich:	Medien & Informatik - M&I
Hersteller:	Kitronik
language:	English, German

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessory Items

BBC micro:bit V2 - Club Box (pack of 10)

BBC micro:bit Classroom Pack. The Classroom Pack consists of 10 x BBC micro:bits, 10 x 1M anti tangle USB Cables, 10 x Battery Cages and 20 x AAA Batteries. This buying option offers a better value way of obtaining multiple starter packs, making it an ideal choice for equipping your classroom. An individual starter pack contains everything you need to connect your BBC micro:bit to your computer and also enables you to power your BBC micro:bit once you disconnect it from the USB.Your BBC micro:bit will come in one of 4 colour schemes, unfortunately it is not possible to specify which colour you will receive. The BBC micro:bit is a powerful handheld, fully programmable, computer designed by the BBC and a number of partners to encourage children to get actively involved in writing software and building new things that will be controlled by it. Write your code using one of the easy to use editors provided on the BBC micro:bit website, connect your BBC micro:bit to your computer via USB press the compile button in the editor and then drop the downloaded file directly onto your BBC micro:bit. There is also an app for Android devices. Wirelessly connect and interact with the world around you. Use Bluetooth Low Energy to connect to mobile phones and tablets, take a selfie or drive the music in your playlists. The BBC micro:bit is the spiritual successor of the BBC Micro of the 1980s, which itself introduced a generation of children to computing. The BBC micro:bit carries on this 30 year tradition and does it 18 times faster and is 70 times smaller than its predecessor. Based around a 32 bit ARM Cortex-M0 processor, the BBC micro:bit also features on board accelerometer and compass sensors, Bluetooth Low Energy and USB connectivity, a display consisting of 25 LEDs, two programmable buttons and it can be powered by either USB or an external battery pack. The device inputs and outputs are through five ring connectors that are part of the 21-pin edge connector. Features: USB and Bluetooth Low energy connectivity. Compass and Accelerometer. 2 x user assignable buttons. A 25 LED display. 21 pin edge connector. Contents: 10 x BBC micro:bits. 10 x 1M Anti Tangle USB Cables. 10 x Battery Cage. 20 x AAA Batteries. Dimensions: PCB Length: 52mm. PCB Width: 42mm. PCB Height: 11.7mm. PCB Height: 11.7mm.

Content: 10 Paket(e) (CHF 28.60* / 1 Paket(e))

CHF 286.00*

Details

Micro:Bit V2 Nur Platinen

Das BBC micro:bit ist ein codierbarer Taschencomputer mit Bewegungserkennung, eingebautem Kompass, LED-Display, Lautsprechern, Mikrofon und integrierter Bluetooth-Technologie. Die Platine misst 4cm x 5cm, ist in verschiedenen Farben erhätlich, macht Spass und ist einfach zu bedienen. In wenigen Sekunden kann etwas Einfaches codiert werden - wie das Aufleuchten seiner LEDs oder das Anzeigen eines Musters - ohne Vorkentnisse des Computerwesens. Mit anderen Geräten, Sensoren, Kits / Objekten verbunden, ist diese Platine ein Begleiter zu Arduino, Galileo, Kano, littleBits, SparkFun und Raspberry Pi, die als Sprungbrett für komplexere Lerneraufgaben dienen. Jedes Element ist über eine einfach zu bedienende Software auf einer eigenen Website (www.microbit.co.uk) vollständig mit einem PC, Tablet oder ein Mobilgerät programmierbar. Enthalten ist nur die BBC micro:bit Platine!

CHF 32.00*

Details

Similar Items

BBC micro:bit Inventor's Kit

Get more from the BBC micro:bit with Kitronik's incredible Inventor's kit! The simple way to learn about creating circuits and code. Please Note: BBC micro:bit is NOT included. The Kitronik Inventor's Kit for the BBC micro:bit is a great way to get started with programming and hardware interaction with the BBC micro:bit. This Inventor's Kit contains everything you need to complete 10 experiments including using LEDs, motors, LDRs and capacitors. To get you off to a flying start, Kitronik have included an easy to follow tutorial book which guides you through everything you will need to know about programming the BBC micro:bit. You don't need any experience with programming as the tutorial book will guide you every step of the way. You'll be programming and creating circuits in no time! The Kitronik Inventor's Kit for the BBC micro:bit provides a fantastic way of learning how to construct and control electronic circuits. The BBC micro:bit has a selection of pins that are located on the bottom edge of its PCB (see datasheet below for details). By using the specially designed Edge Connector Board for the BBC micro:bit in conjunction with the breadboard (see below), it is easy to use these pins to connect additional components to the BBC micro:bit. No soldering is required and you can build your first circuit in minutes! Note: This kit requires assembly. Features: No soldering required - build your first circuit in minutes! Make 10 experiments included in the provided step-by-step tutorial book. All parts are included to conduct the 10 experiments (listed below). Breaks out 21 accessible pins from the BBC micro:bit using the Edge Connector Board for the BBC micro:bit (included). Small Prototype Breadboard included for fast prototyping. All of the experiments included in this booklet (listed below) are based on the Microsoft BlockEditor and Microsoft TouchDevelop editor software. Experiments included in the tutorial book: Experiment One: Say 'Hello' to the BBC micro:bit. Experiment Two: Using an LDR & analog inputs. Experiment Three: Dimming an LED using a potentiometer. Experiment Four: Using a transistor to drive a motor. Experiment Five: Using the accelerometer to control motor speed. Experiment Six: Setting the tone with a piezo buzzer. Experiment Seven: Wind power. Experiment Eight: Making a game using the compass. Experiment Nine: Capacitor charge circuit. Experiment Ten: Using an RGB LED. Contents: 1 x Perspex Mounting Plate. 1 x Potentiometer & Finger Adjust Spindle. 2 x Plastic Spacer 10mm. 1 x Sticky Fixer for Battery Pack. 1 x Small Prototype Breadboard. 1 x Terminal Connector. 4 x Push Switch. 1 x Motor. 1 x Transistor. 2 x Red 5mm LED. 2 x Orange 5mm LED. 2 x Yellow 5mm LED. 2 x Green 5mm LED. 1 x RGB 5mm LED. 1 x Fan Blade. 5 x 2.2KΩ Resistor. 5 x 10KΩ Resistor. 5 x 47Ω Resistor. 1 x Edge Connector Breakout Board for BBC micro:bit. 1 x Miniature LDR. 10 x Male to Male Jumper Wires. 10 x Male to Female Jumper Wires. 4 x Self-adhesive Rubber Feet. 1 x 470uF Electrolytic Capacitor. 1 x Piezo Element Buzzer. 4 x Pan Head M3 Machine Screw. Requires: 1 x BBC micro:bit. 1 x Phillips Screwdriver. 1 x Terminal Block Screwdriver. 1 x Micro USB Cable.

From CHF 48.18*

Details