nOOds - Flexible LED Filament - 3V 300mm Weiss

CHF 727.00*

Content: 1 Stück

Available. If the available stock is exceeded, no additional units of this item can be added to the cart. If you have any questions, please contact the service hotline at the bottom of this page.

colour

Blau

Green

Rot

Weiss

Product number: ADA-5503

Product information "nOOds - Flexible LED Filament - 3V 300mm Weiss"

Our favourite food when chopping code or electronics is a hot bowl of noodles - and in New York they are often called "noods"!

What we have here are flexible LED noodles in different lengths and colours. All of them are not good for eating, but they are good for cool lighting effects. These are often seen in "Edison-like" LED lights, shaped into hearts or stars or simply wrapped around to create a fun or warm lighting effect. They consist of dozens of micro-LED diodes connected together on an ultra-flexible metal back and then coated with coloured silicone for protection. Because the LEDs are connected in parallel, you only need 3 V to make them light up - we recommend current limiting with a resistor to let a maximum of 50 mA through.

One piece per pack. Add some miniature noodle-y neon bling to your miniature sets, dioramas, dollhouses, mini verses what have you! These look and feel like we've always wanted an EL cord to look and feel, and since it's just a "big long LED", you can easily dim it via PWM.

Just switch on with 3 V by connecting both ends - the anode should be the metal end with a small hole in it. If it doesn't light up immediately, try it the other way round, no problem.

This noodle is 300 mm long.

Bildungsstufe:	Diploma/High School, Middle years
Fach:	design, design, e-Textiles
Fachbereich:	Gestalten

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar Items

Lilypad Conductive Thread Bobbin

This is 12 meters of smooth conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable electronics without the upfront cost of buying an entire spool of thread. Close to 40 feet of thread is enough to get a simple design stitched onto your shirt, backpack or hat. What sets this thread apart from the other conductive thread that we carry is the fact that it’s actually spun from 12UM stainless steel fiber making it incredibly smooth and without the loose hairs seen on other bobbins. This means that while it may not be easy to solder to, because it’s stainless, it also won’t burn up when you touch it with a soldering iron. Suitable for hand or machine sewing (as a bobbin thread). We’ve had no trouble using it for close, tight connections, but if you’re worried, waxing the thread should keep it manageable!

CHF 9.95*

Bare Conductive Electric Paint

Die elektrische Farbe von Bare Conducive Electric Paint verhält sich ähnlich wie wasserlösliche Farbe, ist aber elektrisch leitfähig. Das heisst, dass Leiterbahnen oder Sensoren direkt auf eine Vielzahl von Materialien gezogen werden können. Dazu gehören Papier, Holz, Plastik und Glas. Ähnlich wie gewöhnliche wasserlösliche Farbe, kann die elektrische Farbe zum Malen, Siebdruck, Schablonieren oder Aquarellieren verwendet werden.

From CHF 20.00*

Details

Electroluminescent (EL) Wire

EL Wire, also known as Electroluminescent wire, is a stiff wire core coated with phosphor and then covered with a protective PVC sheath. When an AC signal is applied to it, it glows an blue color. You can make it look different colors by changing the coating. It looks a little like thin neon. Very bendable, it keeps its shape and you can curl it around your finger. Its an easy way to add some glow to a project, not as bright as LEDs but uses a lot less power! We've got 2.6mm thickness EL wire, with a lime green coat, pre-cut and soldered to a standard quick-connect EL wire. We used to stock Wanyu EL wire, but sadly they've closed doors so we no longer have the high-brightness EL wire. That said, this brand seems to be good quality and close in brightness! Often used for costuming, decoration, accent lighting, safety vests, bicycle/motorcycle/car/boat/home decoration, signs, etc! This wire is not designed explicitly for outdoor use so it will fade if continuously exposed to UV. To use, the wire must be connected to an inverter that provides an AC supply of approximately 100V at 2000 Hz. An inverter is not included! This wire is 250 cm long which is the maximum that can be driven by our handy 2xAA portable pocket inverter The full length draws 200mA from the 2xAA batteries (so 2000mAh batteries will last ~10 hours if on 'constant' mode) We used EL wire to make our awesome TRON bag so check it out for ideas. This is a pre-cut, pre-soldered, 250 cm long piece of EL You can plug this right into an inverter and get glowing in seconds, and if you want to do something a little more complex, cut and resolder it as desired. Soldering to EL wire is a little tricky but luckily we wrote a detailed step-by-step tutorial! To cut and re-solder EL, you'll need wire strippers, a soldering iron & solder, copper tape and heat shrink. A third-hand tool is really useful as well. ⚠️ Please note! EL tape, EL wire and EL panel are made with different processes - the color and brightness will not be consistent between the different types of EL products. The EL tape will not match the EL wire or EL panel exactly, they all will be slightly different colors.

From CHF 14.50*

Details

nOOds - Flexible LED Filament - 3V 130mm long - Warm White

Our favourite food when chopping code or electronics is a hot bowl of noodles - and in New York they are often called "noods"! What we have here are flexible LED noodles in different lengths and colours. All of them are not good for eating, but they are good for cool lighting effects. These are often seen in "Edison-like" LED lights, shaped into hearts or stars or simply wrapped around to create a fun or warm lighting effect. They consist of dozens of micro-LED diodes connected together on an ultra-flexible metal back and then coated with coloured silicone for protection. Because the LEDs are connected in parallel, you only need 3 V to make them light up - we recommend current limiting with a resistor to let a maximum of 50 mA through. Just switch on with 3 V by connecting both ends - the anode should be the metal end with a small hole in it. If it doesn't light up immediately, try it the other way round, no problem. This noodle is 300 mm long.

CHF 6.65*

LilyPad Sewable Electronics Kit

The LilyPad Sewable Electronics Kit lets you explore the wonderful world of electronic sewing (e-sewing) and e-textiles through a series of introductory projects using the LilyPad system. You’ll learn how to sew basic circuits to light up LEDs, control them with buttons and switches and even experiment with a pre-programmed LilyMini circuit that reacts to ambient light levels. In addition to LilyPad LEDs and battery holders, the kit comes with two LilyPad ProtoSnap boards that let you explore the circuit before you sew the pieces into a project. The full-color LilyPad Sewable Electronics Kit Guide (included) contains step-by-step instructions for using LilyPad pieces to create four complete sewable circuit projects with conductive thread. Easy-to-follow diagrams and troubleshooting tips make this a great introductory resource for crafters and creatives. LilyPad is a wearable technology developed by Dr. Leah Buechley and cooperatively designed by Dr. Buechley and SparkFun. Each LilyPad component was creatively constructed with large sew tabs to allow for stitching into clothing. Various input, output, power and sensor boards are available. They’re even washable! Note: A portion of this sale is given back to Dr. Buechley for continued development and education in e-textiles. Sewable Electronics Projects: Project 1: Glowing Pin Project 2: Illuminated Mask Project 3: Light-Up Plush Project 4: Night-Light Pennant

CHF 185.00*

Details

LilyPad Rainbow LED (6 Colors)

This is the LilyPad Rainbow LED strip, with seven LilyPad LEDs that are still attached to one another, letting you snap LEDs apart at your leisure to sew into clothing or whatever else you can dream up. The LilyPad Rainbow LED features seven individual LEDs in six unique colors (Red, Blue, Green, Yellow, Pink, and White). Text has been added to the back of each board to indicate its color. Due to popular request, we have included two white LEDs instead of just one. Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education in e-textiles.

CHF 7.85*