LilyTwinkle ProtoSnap

3 013.00 CHF*

Contenu : 1 Stück

Prix TTC, frais de livraison en sus

Plus disponible. Pour toute question, veuillez contacter notre hotline de service en bas de cette page.

Réf. produit : SPRK-DEV-11590

Informations sur le produit "LilyTwinkle ProtoSnap"

The ProtoSnap series is a new way to prototype your project without a breadboard. Everything is wired together on a single board, which makes it easy to explore the possibilities of the components before snapping them apart and building them into your project.

The ProtoSnap LilyTwinkle board is a very simple way to jump right into e-textiles. By including the LilyTwinkle, a coin cell battery holder (with built-in switch), and four white LEDs the ProtoSnap LilyTwinkle board easily allows you to add some sparkle to any project. To make your e-textile experience all the more enjoyable we have added a needle set and 30 feet of conductive thread!

Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles and also to Arduino LLC to help fund continued development of new tools and new IDE features.

Bildungsstufe:	cycle 2, cycle 2
Fach:	arts, arts, e-Textiles, informatiques

0 sur 0 évaluations

Laissez une évaluation !

Partagez avec d'autres clients votre avis sur le produit.

Connexion

Votre adresse e-mail

Votre mot de passe

Afficher les évaluations uniquement dans la langue actuelle.

Aucun avis n'a été trouvé. Partagez vos idées avec d'autres personnes.

Accessory Items

Lilypad Conductive Thread Bobbin

This is 12 meters of smooth conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable electronics without the upfront cost of buying an entire spool of thread. Close to 40 feet of thread is enough to get a simple design stitched onto your shirt, backpack or hat. What sets this thread apart from the other conductive thread that we carry is the fact that it’s actually spun from 12UM stainless steel fiber making it incredibly smooth and without the loose hairs seen on other bobbins. This means that while it may not be easy to solder to, because it’s stainless, it also won’t burn up when you touch it with a soldering iron. Suitable for hand or machine sewing (as a bobbin thread). We’ve had no trouble using it for close, tight connections, but if you’re worried, waxing the thread should keep it manageable!

9.95 CHF*

Set d'aiguilles

Cet ensemble d'aiguilles à coudre est indispensable pour coudre votre prochain projet e-textile. Chaque enveloppe contient trois aiguilles de 48 mm, 1,23 mm d'épaisseur et deux aiguilles plus petites de 39 mm, 0,67 mm. L’œil de chaque aiguille est assez grand pour pouvoir facilement enfiler le fil conducteur.

322.00 CHF*

Electro-Fashion, Switched Coin Cell Holder

This specially designed e-textiles coin cell holder from Kitronik has large connection points for the conductive thread. These are clearly marked to show the battery polarity. The unit also has a small power switch so that you can turn the power on and off. It uses a very thin PCB material to keep its size to a minimum.This allows it to be easily incorporated into your own e-textiles designs. Caution: This coin cell holder contains Nickel and should not be used in designs where it will be in prolonged contact with the skin. The board accepts CR2032 batteries. Dimensions: L44 x W20 x H4.5mm

249.00 CHF*

Détails

LilyPad Coin Cell Battery Holder - Switched - 20mm

Sure, your flashing, chip-tune playing T-shirt is really cool at the party… but at some point you need to turn it off. And yes, you could just pull the battery, or maybe you’ve even sewn a LilyPad slide switch in-line. Wouldn’t it be nice if there was just a switch on the battery? Well, look no further. This LilyPad Coin Cell Battery Holder has a small slide switch installed on the board, in-line with the power so you can shut off your project and save batteries. This slide switch is the same as on the LilyPad Slide Switch Board, so it’s not easy to accidentally turn off or on. Just like the original Coin Cell Battery Holder, this simple board holds a 20mm coin cell battery (such as a CR2032) and gives you four connection points (two positive and two negative) for sewing into your project. Additionally, we have strengthened the battery connector on this board in order to ensure that it doesn’t accidentally pop off. Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles.

4.25 CHF*

Détails

Electro-Fashion, Latching Switch Coin Cell Holder

Electro-Fashion, Latching Switch Coin Cell Holder. Includes a 3V coin cell battery holder and latching switch on the same PCB. This provides power and switch capabilities to an e-textiles project on the same board. The switch latches; you press once to turn the power on and press again to turn the power off. Ideal as a built-in switch and power source for e-textile projects. Features: Built-in 3V Coin Cell Holder. Latching switch for switching circuit on and off. Contents: 1 x Electro-Fashion, Latching Switch Coin Cell Holder. Dimensions: Length: 44mm. Width: 28mm. Height: 5mm.

457.00 CHF*

CR2032 3V Coin Cell, pack of 5

Country of origin: China (CN) Manufacturer RND Power Gross weight (incl. package) 20.0 Gram Dimensions (incl. package) 200 x 50 x 6 MM Original pack size Pack of 5 pieces

Contenu : 5 Paket(e) (1.65 CHF* / 1 Paket(e))

8.25 CHF*

Similar Items

LilyPad ProtoSnap Plus

The LilyPad ProtoSnap Plus is a sewable electronics prototyping board that you can use to explore circuits and programming, then break apart to make an interactive fabric or wearable project. Programming the ProtoSnap Plus is easy with the free Arduino software you’ll need to program the ATmega32U4 on LilyPad USB Plus at the heart of the board. Once you’ve installed the software, you’ll be able to write and upload your own programs to the board, making it do almost anything you want. At the center of the ProtoSnap Plus is the LilyPad USB Plus microcontroller, pre-wired to a LilyPad board including a LilyPad Light Sensor, LilyPad Buzzer, LilyPad Button Board, four pairs of colored LilyPad LEDs and a LilyPad Slide Switch. Because these components are connected together on the ProtoSnap board, you can test out your project ideas before you sew. The ProtoSnap Plus also includes expansion ports that let you sew your wearables together or use alligator cables to easily connect external sensors and components. After testing out your coding ideas using the attached LilyPad pieces, you can break apart the prototyping board and sew them into your project! Please be aware that the Lilypad ProtoSnap Plus is NOT supported on Windows 7/8 due to a lack of support drivers for those specific OS’s. Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education in e-textiles.

101.81 CHF*

Lilypad USB Plus

This is the LilyPad USB Plus, a sewable electronics microcontroller board controlled by an ATmega32U4 with the Arduino bootloader. It has a built in power supply JST (and recharge circuit) and an on/off switch with the only extra piece of hardware you need to program the LilyPad USB Plus being a micro-USB cable. We’ve also added an RGB LED in the dead-center of the board along with six white LEDs to act as a sort of bar graph. The LilyPad USB Plus was designed to streamline your next sewable project by keeping things simple and giving you more room to work while eliminating the need to sew a power supply. It has fourteen sew tabs for connecting components with conductive thread. Four of these tabs are reserved for connecting power and ground of LilyPad sensors and accessory boards, and ten are input/output (I/O). For reference, each sew tab has a nearby label with its name and the pin number it is connected to on the ATmega32U4 chip at its center. LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available in the LilyPad line but will also work with most other wearable e-textile lines. They’re even washable! Please be aware that the Lilypad USB Plus is NOT supported on Windows 7/8 due to a lack of support drivers for those specific OS’s. Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education in e-textiles.

55.00 CHF*

LilyTwinkle

La LilyTwinkle est une toute petite carte LilyPad conçue pour ajouter de l'éclat à votre projet. Même si elle est aussi petite que certains capteurs LilyPad, cette carte est équipée d'un microcontrôleur ATtiny et est donc plutôt intelligente ! Il suffit de coudre 4 LEDs et de connecter une batterie pour que les LEDs scintillent et s'éteignent (un peu comme des lucioles... ou des éclairs, si c'est comme ça que vous les appelez). LilyTwinkle est un moyen rapide et facile d'ajouter des lumières scintillantes à un projet, sans programmation ni carte principale encombrante. Si vous êtes un utilisateur avancé et que vous souhaitez reprogrammer le LilyTwinkle, les connecteurs de programmation ICSP se trouvent à l'arrière. LilyPad est une technologie e-textile portable développée par Leah Buechley et conçue en coopération par Leah et SparkFun. Chaque LilyPad a été conçu de manière créative afin de disposer de larges coussinets de connexion permettant de les coudre dans les vêtements. Plusieurs cartes d'entrée, de sortie, d'alimentation et de capteurs sont disponibles. Remarque : une partie de cette vente est reversée au Dr Leah Buechley pour le développement continu et l'éducation des e-textiles.

1 138.00 CHF*