6-AA Battery Holder with EV3 Mount

95.00 CHF*

Contenu : 1 Paket(e)

Disponible. Si le stock disponible est dépassé, aucune unité supplémentaire de cet article ne peut être ajoutée au panier. Si vous avez des questions, veuillez contacter la hotline de service en bas de cette page.

Réf. produit : MS-BBX004

Informations sur le produit "6-AA Battery Holder with EV3 Mount"

This battery holder is designed to hold 6 AA batteries. It has LEGO NXT/EV3 compatible mounting to integrate it into your LEGO contraption easily.

Bildungsstufe:	Sec. II & tertiaire, cycle 2
Fach:	Robotique, informatiques

0 sur 0 évaluations

Laissez une évaluation !

Partagez avec d'autres clients votre avis sur le produit.

Connexion

Votre adresse e-mail

Votre mot de passe

Afficher les évaluations uniquement dans la langue actuelle.

Aucun avis n'a été trouvé. Partagez vos idées avec d'autres personnes.

Accessory Items

PiStorms Starter Kit for Raspberry Pi and EV3

Make stunning robots with Raspberry Pi Brain and LEGO Mindstorms parts. Touch Screen Display makes it easy to interact with your bot! - 4 Motor Ports and 4 Sensor Ports - Attach LEGO Mindstorms NXT or EV3 motors and sensors - PiStorms compatible sensors and motors - Built-in 2.4 inch Color Touch Screen Display - Sturdy Design - Program using Python or Scratch - Get started with Python - Get Started with Scratch - Works with Raspberry Pi A+, B+, Pi 2 & Pi 3 - Connect to internet over Ethernet or Wifi - Access Raspberry Pi peripherals through USB, audio and camera connectors. - Remote Access your Raspberry Pi with computer or mobile devices with VNC. Included: PiStorms-v2 Base Kit 8GB SD Card with Ready to use PiStorms Image Lego Compatible Frame Stylus

165.00 CHF*

JST Jumper Wire and Socket

Il s'agit d'un simple câble à deux fils. Idéal pour passer d'une carte à l'autre ou à peu près n'importe quoi d'autre. Il y a un connecteur JST à 2 broches à une extrémité, le câble nu à l'extrémité opposée et il est également livré avec le connecteur correspondant pour le JST. Caractéristiques : Connecteur JST à 2 broches à une extrémité, câble nu à l'extrémité opposée. Livré avec le connecteur correspondant pour le JST que vous pouvez monter sur un PCB. Peut être utilisé pour concevoir d'autres options d'alimentation pour le microbit. Contenu : 1 x Fil de liaison et connecteur JST Dimensions : Longueur : 15cm.

177.00 CHF*

Similar Items

4 x AA Battery Holder with On/Off Switch

Make a nice portable power pack with this 4 x AA battery holder. It fits any alkaline or rechargeable AA batteries in series. There's a snap on cover and an on/off switch which can be handy when wiring to something without a switch. New! We now have 0.1" headers on ends of these cables so you can plug them into a breadboard or headers with ease! Of course, you can still always solder to them or cut the ends off. The four batteries are held in series, for a nominal output of 6V DC for alkaline (6.4V when fresh, 4V when dead), and 4.8V DC for rechargeables (5.2V when fully charged, 4.4V when discharged). Using rechargeables will make this work nicely with nearly any 5V project, with alkalines you may want to put a 1N4001 in series to drop the voltage from 6V down to 5.3V.

514.00 CHF*

Détails

CR123A Li-ion Battery Holder for micro: Maqueen

This is a Li-ion Battery Holder specially designed for micro: bit educational robot Maqueen. It can be used to hold a CR123A 3.6V lithium rechargeable battery to provide more than 8 hours continuous power for Maqueen. Using this environment-friendly product, you can save about 200 batteries in one year.This Li-ion Battery Holder integrates charging circuit and MicroUSB interface, freeing users from purchasing extra charger. Meanwhile, we set over-current and reverse connection protection for it to improve the safety in using Li-ion Battery. SPECIFICATION Charging Voltage: 4.5-5.5V DC Charging Interface: USB Output Voltage: 3.5~4.2V DC Reverse Connection Protection Over Current Protection Charging Current: 350mA Dimension: 56×32mm/2.20”×1.26” SHIPPING LIST CR123A Li-ion Battery Holder(V1.0) x1 Screw x4 Copper Column x4 Connecting wire x1 Double-side Adhesive Tape x1

10.35 CHF*

JST Jumper Wire and Socket

177.00 CHF*

4AA Battery Holder with NXT Mount

Dieser Batteriehalter ist für 4AA Batterien (für den Einsatz mit NXTServo und MTRMX-Nx) ausgelegt. Er hat NXT-kompatible Montagelöcher, um es in Ihre NXT-Konstruktion einfach zu integrieren.

1 525.00 CHF*

2xAAA Battery Cage with JST Connector

This 2xAAA Battery Cage with JST connector is compatible with the Igloo, PICAXE wearable module and the BBC micro:bit. Supplied with 145mm colour coded power leads and a JST connector at the end, this battery cage is light and features a M3 mounting hole in the centre so it can be attached to the back of BBC micro:bit cases. The JST connector easily plugs into the Igloo and BBC micro:bit to provide a portable power supply. Ideal in any project kit with a JST connector power supply interface. Features: JST connector for easy power supply connections. Holds 2 x AAA batteries. Clips hold AAA batteries securely in place. 145mm colour coded power leads and a JST connector. Clip holder resistant to sudden impacts and vibrations. Contents: 1 x 2xAAA Battery Cage with JST Connector. Dimensions: Length: 53mm. Width: 25mm. Height: 13mm.

135.00 CHF*

4xAA battery Cage with Clip

This battery cage houses four AA batteries and features a PP3 clip connection. This allows for quick and easy removal from a project. The batteries are arranged in a 2 over two configuration to allow for a relatively small footprint, which will make it easier to accommodate inside enclosures where space is at a premium as the cage is a little more than 1 AA battery in length. Features: Houses 4 x AA batteries. Features a PP3 clip connector. Arranged in a 2 over two configuration for a smaller footprint. Contains: 1 x 4 AA Battery Cage with a PP3 clip connection.

135.00 CHF*