Ultrasonic Distance Sensor for Bit:Bot Classic

CHF 85.00*

Contenuto: 1 Stück

Prezzi incl. IVA più costi di spedizione

Non più disponibile. Per qualsiasi domanda, si prega di contattare la nostra hotline di assistenza in fondo a questa pagina.

Codice prodotto: 4T-ULTRAS

Info sui prodotti "Ultrasonic Distance Sensor for Bit:Bot Classic"

NB. Bit:Bot not included

Ready-Soldered, just attach to your Bit:Bot with the screws provided and off you go.

Use Microsoft PXT (or MicroPython with some awkward code) to read the distance to an obstacle, then program your Bit:Bot to avoid it.

Both Ping and Echo signals are on the same pin (Pin 15)

The sensor soldered into the PCB is much more robust and reliable, but has a big drawback in that you cannot access the micro-USB connector on the micro:bit unless you either remove the micro:bit or use a right-angled USB cable.

Consider using the right-angled USB cable with this option

Bildungsstufe:	Scuola media, Scuole medie superiori e professionali
Fach:	Robotica, informatica

0 di 0 valutazioni

Formula una valutazione!

Condividi le tue esperienze con il prodotto con altri clienti.

Login

Il tuo indirizzo e-mail

La tua password

Visualizza le valutazioni solo nella lingua corrente.

Nessuna recensione trovata Condividi le tue opinioni con gli altri.

Accessory Items

Right-Angled Micro-USB Cable (1m)

Quality 1m Micro-USB Cable with Right-Angled Connector This is ideal to use with the Bit:Bot robot when the Ultrasonic module is attached. It allows you to easily reprogram the BBC micro:bit without removing the ultrasonic sensor

CHF 571.00*

Similar Items

Edge Connector Breakout Board for BBC micro:bit

This pre-built Edge Connector Breakout Board for the BBC micro:bit gives access to all the important pins on the bottom edge of the BBC micro:bit. Looking to do more with your BBC micro:bit? Unlock its potential with this pre-built version of our Edge Connector Breakout Board! This breakout board has been designed to offer an easy way to connect additional circuits and hardware to the pins on the edge of the BBC micro:bit. It provides access to all of the BBC micro:bit processor pins allowing a lot of extra functionality to be added. The datasheet (below) includes a helpful diagram explaining the function of every pin on the BBC micro:bit. This Edge Connector Breakout Board for the BBC micro:bit gives access to all of the important pins on the bottom edge of the BBC micro:bit. 21 pins are broken out in total; providing additional I/O lines, direct access to buttons A and B, the LED matrix outputs and the I2C bus. Please refer to the datasheet below for more details. The BBC micro:bit pins are broken out to a row of pin headers. These provide an easy way of connecting circuits using jumper wires. The SCL and SDA pins are separated at the edge of the board (solder pads) providing easy identification. The PCB includes a prototyping area with 3V, 0V and unconnected rows that can be soldered to. This allows the easy connection of switches, sensors and any pull-up or pull-down resistors etc. as required. To use the breakout board the BBC micro:bit should be inserted firmly into the connector as shown below:

CHF 821.00*

Sensore di distanza LEGO® Technic

Ottieni risultati di alta precisione con il sensore di distanza LEGO® Technic, con intervallo di 1-200 cm, precisione di +/- 1 cm, "occhi" a base di LED programmabili, adattatore a 6 pin integrato per sensori di terze parti, schede e hardware DIY. Sensore di onda sonora con intervallo di 1-200 cm e precisione di + /- 1 cm per risultati accurati e ripetibili. "Occhi" a base di LED programmabili per dare vita a qualsiasi costruzione. Interfaccia integrata standard di settore per sensori di terze parti, schede e hardware DIY. Fattore di forma semplice per costruzione e ricostruzione rapide.

CHF 42.00*