Passa al contenuto principale Salta alla ricerca Passa alla navigazione principale

Bit:Bot XL Robot for BBC Micro:Bit

Info sui prodotti "Bit:Bot XL Robot for BBC Micro:Bit"

Bit:Bot XL Fully Integrated Robot for the BBC Micro:Bit

Introducing BitBot XL, taking the much-loved BitBot to the next level. We have made several changes, some subtle, some not so subtle, to give a much-improved experience of using and working with the BitBot.
NB. BBC Micro:Bit is NOT included. Please purchase HERE if required

The Microsoft Makecode Extension for Bit:Bot also works for BitBot XL. Go to the Advanced tab or the Tools gear icon and select Extensions, then search for BitBot. It can automatically detect while running which version you have, or you can force it to be the Classic BitBot or the new XL.

  • Product Dimensions approx 10% larger in length and width
  • Chunky wheels
  • Ready - assembled. Battery pack permanently attached
  • Motor gearboxes fully covered - minimises fluff in the gears
  • Microbit mounted vertically
  • Uses standard breakout connector for ultrasonic breakout
  • Line sensors no longer share pins with the Microbit buttons - removes all Bluetooth pairing issues and allows use of buttons in your code
  • Pen holder is fitted as standard. Mounted directly over the pivot point for better drawing
  • Indicator LEDs added for line follower sensors
  • 2 GVS outputs provided for potential servo usage with 5V power
  • Makecode extension has been changed so code is compatible with both Classic and XL versions
  • Buzzer now connected on Pin 0 so you can play music through it

And it still retains all these features from the classic BitBot:

  • 2 micro-metal gear motors. Both fully controllable in software, for both speed (0 to 100%) and direction (forward or reverse)
  • Wheels with rubber tyres for maximum grip
  • Front ball caster
  • 12 Smart RGB LEDs in 2 sets of 6 along the arms either side. Select any colour for any pixel, produce stunning lighting effects as your Bit:Bot XL moves around
  • 2 digital line following sensors. Code your own line-following robots and race them to see whose code produces the fastest lap time!
  • 2 analog light sensors (front left and front right) so your Bit:Bot XL can be programmed to follow a light source such as a torch, or you could code it to go and hide in the darkest place it can find
  • Buzzer, so you can make beeping sounds or music whenever you want
  • Powered from integrated 3xAA battery holder with on/off switch and blue indicator LED
  • Easily plug your BBC micro:bit in and out using the vertical edge connector
  • Expansion connections at the front for accessories* Microbit, Pen and Ultrasonic not included
  • * Microbit, Pen and Ultrasonic not included

See our detailed blog entry for example code snippets and application ideas

Learn here how to control the Bit:Bot with your Bluetooth phone

Betriebsystem: Win
Bildungsstufe: Scuola media, Scuole medie superiori e professionali
Fach: Robotica, informatica
Schnittstelle: USB, WIFI

0 di 0 valutazioni

Valutazione media di 0 su 5 stelle

Formula una valutazione!

Condividi le tue esperienze con il prodotto con altri clienti.


Salta la galleria dei prodotti

Accessory Items

Ultrasonic Distance Sensor Breakout
Ultrasonic Breakout This breakout is a simple and robust way to add ultrasonic distance sensing to your robot. Supported on BitBot XL, Pi2Go Mk2, Pi-Bug (v1.1 and later), Minibit and other 4tronix robots released from July 2019 onwards (including the Robobit Mk3, v1.3 onwards) This breakout is fully compatible with Pimoroni's breakout garden, so you can plug it into any of the I2C connectors and use it on GPIO pin 4. It is a single pin, 3.3V sensor breakout. So the Ping and the Echo are on the same pin. Code it using standard HC-SR04 code. * Pi2Go, BitBot, etc. not included

CHF 862.00*
Right-Angled Micro-USB Cable (1m)
Quality 1m Micro-USB Cable with Right-Angled Connector This is ideal to use with the Bit:Bot robot when the Ultrasonic module is attached. It allows you to easily reprogram the BBC micro:bit without removing the ultrasonic sensor

CHF 571.00*
Talon Claw / Grabber for Bit:Bot (XL)
NB. Bit:Bot not included No soldering required. Just a number screws to attach NOTE: Versions for Classic and XL are different, ensure you select the correct one. The Talon accessory allows you to control the opening of the jaw using standard servo code in Makecode for the Microbit. We have also added specific code to the BitBot package to control this Talon directly. Included are the 3 PCBs that make up the Talon, a metal gear servo, and all the screws and pillars you will need. Also included is a Pimoroni spanner widget to help tighten the nyloc nut. (Classic only) Note that the ultrasonic add-on cannot be fitted at the same time as they use the same connections. (XL only) Note that you will need the tall version of the ultrasonic breakout if you want to use it at the same time as the Talon

CHF 2’078.00*
Salta la galleria dei prodotti

Similar Items

Maqueen micro:bit Educational Programming Robot Platform
Hallo, mein Name ist Maqueen, ist ein grafischer Programmierroboter für MINT-Bildung, die Spielbarkeit und einfache Bedienung von Micro:Bit erbt. Der Minikörper, die interessanten Funktionen und die Plug-and-Play-Funktion ermöglichen es Kindern, die grafische Programmierung auf unterhaltsame Weise zu erlernen und das Interesse der Kinder an Wissenschaft und logischem Denken zu fördern. Maqueen ist jetzt für die Mind+ Programmierplattform zugänglich. Mind+ ist eine auf Scratch3.0 basierende grafische Programmierplattform von DFRobot, die Python, Arduino und andere Programmierplattformen unterstützt. Zurzeit wird Mind+ für alle Arten von Sensoren, Modulen und verwandten Bildungsprodukten eingesetzt.

CHF 60.00*
Calli:bot 2
Infine, esiste un robot di guida piccolo, compatto ed economico per il Calliope mini. Non c'è niente di più motivante che testare i propri esperimenti di codifica con un veicolo mobile. Basta lasciare che il Calli:bot parta, eviti un ostacolo, segua una linea o supporti i movimenti con una "luce da discoteca": tutto è possibile. I principianti non sono obbligati a codificare subito, ma possono caricare i nostri blocchi telecomandati su due Calliope mini e competere con il Calli:bot contro un altro gruppo in una "battaglia di guida". Utilizziamo i nostri driver motore e i nostri sensori, che possono essere facilmente controllati e letti attraverso i nostri blocchi MakeCode e nell'Open Roberta Lab. Non è necessario saldare o premere i connettori sul Calliope mini. Il collegamento al Calli:bot avviene tramite il connettore Grove sinistro e il connettore della batteria.   Il Calli:bot fornisce l'alimentazione per il Calliope mini. In questo modo si elimina anche la necessità di una seconda batteria. Il Calliope mini e i capelli Calli:bot non sono inclusi nella fornitura. Caratteristiche principali: Programmazione con MakeCode e Open Roberta. Programmazione con tablet o PC tramite Bluetooth o cavo USB. Plug and Play tramite connettore Grove e batteria. Nessuna saldatura. motori ad ingranaggi metallici silenziosi e potenti quattro LED RGB e due LED rossi due sensori di linea IR un sensore di distanza a ultrasuoni due uscite per servomotori Dati tecnici: Tensione di alimentazione: 3,5 V - 5 V CC 2 sensori a infrarossi 2 luci LED 4 luci RGB Sensore a ultrasuoni 2 mini motoriduttori in metallo 2 uscite per servomotori Rapporto di trasmissione del motore: 1:150 Max. Velocità del motore: 133 giri/min. Motori: controllati da PWM 6 fori filettati M3 per le prolunghe Programmazione grafica tramite MakeCode e Open Roberta Testato EMV Dimensioni: 81 x 85 x 44 mm Peso: circa 80 g Incluso nella consegna: Scheda telaio del robot Scheda adattatore per Calliope mini 1 sensore a ultrasuoni 2 ruote motrici Portabatterie per 3 batterie AAA Nastro adesivo, viti e rondelle

CHF 92.00*