SparkFun's Inventor Kit for Arduino

CHF 119.00 * CHF 159.80 * (25.53% gespart)

inkl. MwSt. zzgl. Versandkosten

In der Regel am Lager, Lieferzeit ca. 1-3 Werktage

  • SPKF-12060
  • 2
The SparkFun Inventor’s Kit (SIK) is a great way to get started with programming and hardware... mehr
Produktinformationen "SparkFun's Inventor Kit for Arduino"

The SparkFun Inventor’s Kit (SIK) is a great way to get started with programming and hardware interaction with the Arduino programming language. The SIK includes everything you need to complete 16 circuits that will teach you how to read sensors, display information on an LCD, drive motors, and more. You don’t need any previous programming or electronics experience to use this kit.

The full-color SIK Guidebook (included) contains step by step instructions of how to connect each circuit with the included parts. Full example code is provided and explained and even includes troubleshooting tips if something goes wrong.

The kit does not require any soldering and is recommended for beginners ages 10 and up. Version 3.2 of the kit adds a new Simon Says circuit experiment with all the LEDs and tactile buttons you will need to complete it, and a new full-color guidebook.

Circuit Examples:

  • Circuit 1: Blinking an LED
  • Circuit 2: Reading a Potentiometer
  • Circuit 3: Driving and RGB LED
  • Circuit 4: Driving Multiple LEDs
  • Circuit 5: Push Buttons
  • Circuit 6: Reading a Photo Resistor
  • Circuit 7: Reading a Temperature Sensor
  • Circuit 8: Driving a Servo Motor
  • Circuit 9: Using a Flex Sensor
  • Circuit 10: Reading a Soft Potentiometer
  • Circuit 11: Using a Buzzer
  • Circuit 12: Driving a Motor
  • Circuit 13: Using Relays
  • Circuit 14: Using a Shift Register
  • Circuit 15: Using an LCD
  • Circuit 16: Simon Says

Kit Includes:

 

  • SparkFun RedBoard
  • Arduino and Breadboard Holder
  • SparkFun Inventor’s Kit Guidebook
  • White Solderless Breadboard
  • Carrying Case
  • SparkFun Mini Screwdriver
  • 16x2 White on Black LCD (with headers)
  • 74HC595 Shift Register
  • 2N2222 Transistors
  • 1N4148 Diodes
  • DC Motor with Gear
  • Small Servo
  • SPDT 5V Relay
  • TMP36 Temp Sensor
  • Flex sensor
  • Softpot
  • 6' SparkFun USB Cable
  • Jumper Wires
  • Photocell
  • Tri-color LED
  • Red, Blue, Yellow, and Green LEDs
  • Red, Blue, Yellow, and Green Tactile Buttons
  • 10K Trimpot
  • Piezo Speaker
  • 330 and 10K Resistors

Documents:

Schulstufe: Sek 2 & Tertiär
DataLogger Schnittstellen: Arduino
Fach: Physik, Robotik/Mikrokontroller
Sprache: English
Betriebsystem: Win
Weiterführende Links zu "SparkFun's Inventor Kit for Arduino"
Garantie(Jahre) "SparkFun's Inventor Kit for Arduino"
2
Weitere Info "SparkFun's Inventor Kit for Arduino"

0

Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "SparkFun's Inventor Kit for Arduino"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.
Bitte geben Sie die Zeichenfolge in das nachfolgende Textfeld ein.

Die mit einem * markierten Felder sind Pflichtfelder.

Arduino Starter Kit Arduino Starter Kit
ab CHF 100.00 *
EVShield for Arduino Duemilanove or Uno EVShield for Arduino Duemilanove or Uno
Inhalt 1 Stück
CHF 127.35 *
TIPP!
TI-Innovator Hub TI-Innovator™ Hub Kit
Inhalt 1 Stück
CHF 99.00 * CHF 135.00 *
BBC micro:bit BBC micro:bit vollständiges Starter Kit
Inhalt 1 Paket(e)
CHF 69.00 *
TIPP!
BUNDLE
LEGO MINDSTORMS Education EV3 Basis-Set LEGO MINDSTORMS Education EV3 Basis-Set
Inhalt 1 Paket(e)
CHF 419.00 *
TIPP!
TI-Innovator™ Rover TI-Innovator™ Rover
Inhalt 1 Stück
ab CHF 199.00 *
BBX004 6-AA Battery Holder
Inhalt 1 Paket(e)
CHF 7.00 *
Der kleine Hacker: Programmieren lernen mit dem Calliope mini Der kleine Hacker: Programmieren lernen mit dem...
Inhalt 1 Stück (CHF 0.00 * / Stück)
CHF 32.50 *
BBX003 6-AA Battery Halter mit EV3 Mount
Inhalt 1 Paket(e)
CHF 14.85 *
Raspberry Pi 3 Raspberry Pi 3
CHF 59.00 *
BrickPi3 Starter Kit BrickPi3 Starter Kit
Inhalt 1 Stück
CHF 189.00 *
BUNDLE
Power Meter for NXT Power Meter for NXT
Inhalt 1 Stück
CHF 87.00 * CHF 108.55 *
Line Follower Sensor for NXT or EV3 Line Follower Sensor for NXT or EV3
Inhalt 1 Stück
CHF 79.80 *
Calliope Mini Klassensatz Calliope Mini Klassensatz
Inhalt 6 Stück (CHF 48.00 * / 1 Stück)
ab CHF 288.00 *
TI-Innovator™ I/O Module Pack TI-Innovator™ I/O Module Pack
Inhalt 1 Stück
CHF 49.00 *
GrovePi+ Board GrovePi+ Board
Inhalt 1 Stück
CHF 45.40 *
BBC micro:bit Prototyping Kit BBC micro:bit Prototyping Kit
Inhalt 1 Stück
CHF 49.70 *
BBC micro:bit Erfinder Kit BBC micro:bit Erfinder Kit
Inhalt 1 Stück
CHF 38.00 *
CodeBug CodeBug
Inhalt 1 Stück
CHF 25.90 *
BrickPi3 Base Kit BrickPi3 Base Kit
Inhalt 1 Stück
CHF 145.80 *
TIPP!
Wedo 2.0 WeDo 2.0 Basisset (Inkl. Software)
Inhalt 1 Stück
CHF 198.60 *
Bee-Bot Bee-Bot Klassenpaket
Inhalt 1 Stück
CHF 584.00 *
Blue-Bot Klassenpaket Blue-Bot Klassenpaket
Inhalt 1 Stück
CHF 779.00 *
ProScope Micro Mobile Microscopes ProScope Micro Mobile Microscopes
Inhalt 1 Stück
ab CHF 252.60 *
Sound Level Sensor Sound Level Sensor
Inhalt 1 Stück
CHF 137.00 *
Makey Makey Classic Makey Makey Classic
Inhalt 1 Stück
CHF 69.00 *
Easi-Speak MP3-Mikrophon Easi-Speak MP3-Mikrophon
Inhalt 1 Stück
CHF 75.00 *
Pyranometer Pyranometer
Inhalt 1 Stück
CHF 379.00 *
LabQuest 2 LabQuest 2
Inhalt 1 Stück
CHF 636.00 *
BUNDLE
NXT/EV* Charger 10V 45517 NXT/EV3 10V Gleichstrom-Ladeger„ät
Inhalt 1 Stück
CHF 35.30 *
WeDo 2.0 Smarthub-Akku WeDo 2.0 Smarthub-Akku
Inhalt 1 Stück
CHF 73.50 *
Zuletzt angesehen