Kitronik All-in-one Robotics Board for BBC micro:bit V1 & V2

Questo prodotto non è attualmente disponibile.
CHF 25,97 *

Prezzi incl. IVA più spese di spedizione

Termine di consegna su richiesta

  • KIT-5641
  • Kitronik
  • 5641
  • 2
This product is end of life and will only be available as long as it is in stock.  A... altro
Informazione prodotto "Kitronik All-in-one Robotics Board for BBC micro:bit V1 & V2"

This product is end of life and will only be available as long as it is in stock.  A Replacement can be found here: KIT-5693

Take your microbit robotics builds to the next level with the Kitronik All-in-one Robotics Board for the BBC micro:bit. The All-in-one Robotics Board enables the BBC micro:bit (connected via a standard card slot connector) to drive 4 motors (or 2 stepper motors) and 8 servos. Coupled with 17 other I/O expansion points, this means the BBC micro:bit can very easily become the core of a whole variety of robotics projects.

The Robotics Board features 2 Dual H-Bridge Motor Driver ICs (capable of driving 2 standard motors or 1 stepper motor each) and 8 servo outputs (capable of driving standard and continuous rotation servos), all controlled from the BBC micro:bit using the I2C protocol via a 16-channel driver IC.

The Link header breaks out all the usable pins from the BBC micro:bit, and is designed to allow 2.54mm pitch pin header to be easily soldered into place. The 17 available I/O pins allow other input devices, such as sensors, or output devices, such as ZIP LEDs, to be added to the board. The I2C communication lines are also broken out (Pins 19 & 20), which means other I2C compatible devices can also be added to the board and controlled by the BBC micro:bit.

Power is provided via either a terminal block or servo-style connector, and the board then produces a regulated 3.3V supply which is fed into the 3V and GND connections to power the connected BBC micro:bit, removing the need to power the BBC micro:bit separately. This also provides the reference voltage for the servo signal level-shift ICs. The 3V and GND pins are also broken out on the Link header, which means external devices can also be powered.

To use the Robotics Board, the BBC micro:bit should be inserted firmly into the edge connector, either way round. If the Link header is being used, the BBC micro:bit LED display should be facing them (see PCB text relating to this).

Features:

  • An all-in-one robotics control solution for the BBC micro:bit.
  • It can drive 4 motors (or 2 stepper motors) and 8 servos.
  • All the usable pins of the microbit are broken out to a 2.54mm link header that is compatible with 2.54mm pitch pin headers.
  • The 17 available I/O pins allow other input devices, such as sensors, or output devices, such as ZIP LEDs, to be added to the board.
  • Power is provided via either a terminal block or servo-style connector.

Contains:

  • 1 x All-in-one Robotics Board for the BBC microbit.

Dimensions:

  • Length: 68mm.
  • Width: 62mm.
  • PCB Thickness: 1.6mm.
Link correlati a "Kitronik All-in-one Robotics Board for BBC micro:bit V1 & V2"
Video "Kitronik All-in-one Robotics Board for BBC micro:bit V1 & V2"

information additionnelle "Kitronik All-in-one Robotics Board for BBC micro:bit V1 & V2"

Requires:

  • A BBC micro:bit.
  • USB Cable.

If using the breakout pads at the back of the board, you will also need:

  • Soldering Iron.
  • Solder.
  • Wire Cutters.
Eigenschaften ansehen altro
Eigenschaften "Kitronik All-in-one Robotics Board for BBC micro:bit V1 & V2"
livello: Scuola media, Scuole medie superiori e professionali
DataLogger Interfacce : BBC Micro:Bit
materia: ed. manuale e tecnica, Robotica
Hersteller Kitronik
Kitronik creates high quality products and resources for education and makers, and as such stock... altro
Herstellerinformation "Kitronik"
Kitronik

Kitronik creates high quality products and resources for education and makers, and as such stock an extensive range of electronic project kits, components, tools and test equipment, a wide range of materials and also e-textiles products including conductive thread.

Ulteriori prodotti di Kitronik
Leggere, scrivere e discutere recensioni... altro
Valutazione cliente per "Kitronik All-in-one Robotics Board for BBC micro:bit V1 & V2"
Scrivi una valutazione
Inserisci questi caratteri nel campo di testo sottostante.

I campi contrassegnati con * sono obbligatori.

BBC micro:bit V2 - Club Box (pack of 10) BBC micro:bit V2 - Club Box (pack of 10)
Contenuto 10 Pacco (CHF 28,60 * / 1 Pacco)
CHF 286,00 *
Nastro conduttivo in tessuto di nylon - 5mm di larghezza x 10 metri di lunghezza Nastro conduttivo in tessuto di nylon - 5mm di...
Contenuto 10 Metro lineare (CHF 0,62 * / 1 Metro lineare)
CHF 6,23 *
Enviro:Bit Enviro:Bit
CHF 30,13 *
micro:bit Enclosure (LEGO Compatible) micro:bit Enclosure (LEGO Compatible)
Contenuto 1 Pezzo
CHF 4,10 *
GamePad for Micro:Bit v3.0 GamePad for Micro:Bit v3.0
Contenuto 1 Pezzo
CHF 30,13 *
BUNDLE
Continuous Rotation Micro Servo - FS90R Continuous Rotation Micro Servo - FS90R
Contenuto 1 Pezzo
CHF 13,45 *
Servo Motor 180° mit Zubehör Servo Motor 180° mit Zubehör
Contenuto 1 Pezzo
CHF 11,43 *
littleBits Code Kit package littleBits Code Kit
Contenuto 1 Pezzo
CHF 275,00 *
BBC micro:bit Erfinder Kit BBC micro:bit Erfinder Kit
Contenuto 1 Pezzo
Da CHF 46,75 *
Crocodile Leads (set of 10) Crocodile Leads (set of 10)
Contenuto 10 Pacco (CHF 0,51 * / 1 Pacco)
CHF 5,09 *
Visto