ZIP Halo HD for micro:bit

CHF 33.40 *

inkl. MwSt. zzgl. Versandkosten

In der Regel an Lager, Lieferzeit ca. 1-3 Werktage

  • KIT-5672
The Kitronik Halo HD board for the BBC micro:bit incorporates 60 individually addressable full... mehr
Produktinformationen "ZIP Halo HD for micro:bit"

The Kitronik Halo HD board for the BBC micro:bit incorporates 60 individually addressable full colour ZIP LEDs. It also breaks out P1 and P2 to a standard 0.1” footprint, it features a MEMS microphone for detection of sound, and a piezo buzzer to play sound. If that weren't enough, it also features an onboard real time clock (RTC) controlled by I2C lines from the microbit. The board also has two M3 mounting holes. We think you'll agree, the board is loaded with useful features. It doesn't stop there...

Plug n Play: No tools required, not even a screwdriver, plug the micro:bit straight into the onboard edge connector and you are good to go!

Onboard Power: The board has a 3xAA battery holder mounted on the rear, with a power switch on the front of the board. A regulated supply is produced on the board which is fed into the 3V and GND connections to power the connected BBC micro:bit, removing the need to power the BBC micro:bit separately. See the Datasheet for more information.

MakeCode Blocks: Kitronik have created custom blocks for the Halo HD for use with MakeCode. To add these blocks, first go to makecode.microbit.org and start a new project. Under the “Advanced” section click on “Extensions”. In the next window search for “Halo HD”. Then, click on the tile to import it into MakeCode. You will see that the blocks are split across three categories; ZIP LEDs, Microphone and Clock. You can find more information on the MakeCode editor and also on how to write code for it with MicroPython in the Datasheet.

Examples: To get you off to a flying start we have produced a number of code examples that cover all of the onboard features and that will also serve to inspire your own projects. You will find links to these examples in the resources section below.

Features:

  • The board features 60 individually addressable full colour ZIP LEDs.
  • It breaks out P1 and P2 to a standard 0.1” footprint.
  • It's wired for sound with a MEMS microphone and a piezo buzzer.
  • It has an onboard Real time clock (RTC) controlled by I2C lines.
  • Plug n play with the onboard edge connector, no tools required!.
  • The board has a 3xAA battery holder mounted on the rear.
  • The On/off switch helps you maximise battery life.
  • It can be coded with MakeCode blocks via our custom blocks or with MicroPython.
  • 2 x M3 Mounting holes, for secure projects.

Contents:

Dimensions:

  • Diameter: 87mm.
  • M3 Mounting Holes Spacing (Center to Center): 68.4mm.
Schulstufe: Sek 2 & Tertiär, Zyklus 3
DataLogger Schnittstellen: BBC Micro:Bit
Fach: Gestalten (LP21), Informatik, Medien und Informatik (LP21), Physik, Robotik/Mikrokontroller
Weiterführende Links zu "ZIP Halo HD for micro:bit"
Weitere Info "ZIP Halo HD for micro:bit"

Requires:

  • 1 x microbit.
  • 1 x USB Type-A to Micro-B USB Noodle Cable.

Electrical characteristics:

  • Operating Voltage (Vcc): 3.5V 5V.
  • Number of ZIP LEDs: 60.
  • Number of external channels: 3 (1x ZIP LED, 2x IO pin, each IO channel rated +3V at 50mA).
  • Max Current (ZIP LED running full RGB brightness): 0.9A (15mA per ZIP).
  • MEMS Microphone Sensitivity: Typ: -42 dBV/Pa.
  • MEMS Microphone Signal to Noise Ratio: 59dB.
  • BBC micro:bit Pin Connection Information:
  • MEMS Microphone: P0 (analogue input).
  • P1 Breakout pin header: 1 P1, 2 - +V (Battery Voltage), 3 - GND.
  • P2 Breakout pin header: 1 - P2, 2 - +V (Battery Voltage), 3 - GND.
  • ZIP LED: P8.
  • Buzzer: P14.
  • RTC: P19 & P20 (using the I2C lines).
Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "ZIP Halo HD for micro:bit"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.
Bitte geben Sie die Zeichenfolge in das nachfolgende Textfeld ein.

Die mit einem * markierten Felder sind Pflichtfelder.

Boson Starter Kit for micro:bit Boson Starter Kit for micro:bit
Inhalt 1 Paket(e)
CHF 89.00 *
BBC micro:bit Erfinder Kit BBC micro:bit Erfinder Kit
Inhalt 1 Stück
CHF 38.00 *
BUNDLE
iRobot Root iRobot Root
CHF 245.00 *
mTiny Coding Kit mTiny Coding Kit
CHF 189.00 *
GamePad for Micro:Bit v3.0 GamePad for Micro:Bit v3.0
Inhalt 1 Stück
CHF 24.00 *
BBC Micro:Bit Starter Kit Basic BBC Micro:Bit Starter Kit Basic
CHF 95.00 * CHF 100.00 *
BBC Micro:Bit Starter Kit Deluxe BBC Micro:Bit Starter Kit Deluxe
CHF 195.00 * CHF 200.00 *
Moisture Sensor for micro:bit Moisture Sensor for micro:bit
Inhalt 1 Stück
CHF 13.95 *
Calliope Mini Satz 2.0 Calliope Mini Satz 2.0
Inhalt 1 Paket(e)
ab CHF 57.45 *
BBC micro:bit BBC micro:bit Grundlage Kit
Inhalt 1 Stück
CHF 27.90 *
BBC micro:bit BBC micro:bit vollständiges Starter Kit
Inhalt 1 Paket(e)
CHF 69.00 *
Thymio II Thymio II
Inhalt 1 Stück
CHF 135.00 *
Misty II Misty II
CHF 3'500.00 *
micro:bit Enclosure (LEGO Compatible) micro:bit Enclosure (LEGO Compatible)
Inhalt 1 Stück
CHF 4.00 *
Flex-View Digital Microscope Flex-View Digital Microscope
Inhalt 1 Stück
CHF 95.00 *
Python For Kids Python For Kids
CHF 38.90 *
noise:bit micro:bit Kit noise:bit micro:bit Kit
Inhalt 1 Stück
CHF 44.00 *
Gravity IoT Starter Kit for micro:bit Gravity IoT Starter Kit for micro:bit
Inhalt 1 Paket(e)
CHF 89.00 *
Kitty Case for micro:bit Kitty Case for micro:bit
Inhalt 1 Stück
CHF 5.40 *
Pen Holder for Bit:bot Classic Pen Holder for Bit:bot Classic
Inhalt 1 Stück
CHF 5.90 *
Zuletzt angesehen