Sensor Board for micro:bit

CHF 13.00 *

inkl. MwSt. zzgl. Versandkosten

In der Regel an Lager, Lieferzeit ca. 1-3 Werktage

  • KIT-46122
  • 2
Description The MonkMakes Sensor Board allows you to detect sound levels, temperature and... mehr
Produktinformationen "Sensor Board for micro:bit"

Description

The MonkMakes Sensor Board allows you to detect sound levels, temperature and light levels. It features ring pad connectors for use with crocodile clips make it easy to connect to the board to a microbit.

Sound Level:
It senses sound level with a MEMs, which is a microphone on a chip that also features a pre-amplifier circuit. You can then use the plot bar graph block in the Microsoft MakeCode editor to display the result on the microbits LED matrix.

Temperature Level:
The temperature output from the board is a voltage that indicates the temperature. This is then measured using an analog input on the micro:bit. If you want your temperatures in Fahrenheit, then multiply the temperature in degrees C by 9, divide the result by 5 and then add 32.

Light Level:
The light sensor uses a photo-transistor to measure the light level and produces an output voltage that increases as the light level increases. It has 3V and GND connectors on both sides of the board which make it possible to power another board, such as the Relay Board or Powered Speaker Board.

Features:

  • 3V and GND connections can be made from either side and allow you to power a second board such as the MonkMakes Relay Board or MonkMakes Speaker.
  • LED ‘power on’ indicator. Reverse polarity protection.
  • All three sensors are analog and can be connected to pins P0, P1 and P2 using alligator clips.
  • Detects sound level with a MEMs (microphone on a chip) and a pre-amplifier.
  • Uses a thermistor to measure temperature.
  • Light level detection with a photo-transistor (0 to 1023).
  • All three sensors are analog and can be connected to pins P0, P1 and P2 using alligator clips.

Contents:

  • 1 x MonkMakes Sensor Board for the BBC micro:bit.
Weiterführende Links zu "Sensor Board for micro:bit"
Garantie(Jahre) "Sensor Board for micro:bit"
2
Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "Sensor Board for micro:bit"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.
Bitte geben Sie die Zeichenfolge in das nachfolgende Textfeld ein.

Die mit einem * markierten Felder sind Pflichtfelder.

Talon Claw / Grabber for Bit:Bot (XL) Talon Claw / Grabber for Bit:Bot (XL)
Inhalt 1 Stück
CHF 20.00 *
NEU
Makeblock CyberPi Go Kit Makeblock CyberPi Go Kit
Inhalt 1 Stück
CHF 73.20 *
BBC micro:bit 10 Student Classroom Pack BBC micro:bit 10 Student Classroom Pack
Inhalt 10 Paket(e) (CHF 22.50 * / 1 Paket(e))
CHF 225.00 *
Grove - Starter Kit for micro:bit Grove - Starter Kit for micro:bit
Inhalt 1 Paket(e)
CHF 79.00 *
Enviro:Bit Enviro:Bit
CHF 19.00 *
senseBox:edu senseBox:edu
Inhalt 1 Stück
CHF 250.00 *
BBC Micro:Bit Starter Kit Basic BBC Micro:Bit Starter Kit Basic
CHF 95.00 * CHF 100.00 *
Kitty Case for micro:bit Kitty Case for micro:bit
Inhalt 1 Stück
CHF 5.40 *
Moisture Sensor for micro:bit Moisture Sensor for micro:bit
Inhalt 1 Stück
CHF 13.95 *
Das Lego® Mindstorms® EV3-Labor Das Lego® Mindstorms® EV3-Labor
Inhalt 1 Stück
CHF 32.50 *
TIPP!
Thymio II Wireless Thymio II Wireless
Inhalt 1 Stück
ab CHF 188.00 *
TIPP!
BUNDLE
LEGO MINDSTORMS Education EV3 Basis-Set LEGO MINDSTORMS Education EV3 Basis-Set
Inhalt 1 Paket(e)
CHF 425.00 *
Einfache Maschinen Einfache Maschinen
Inhalt 1 Paket(e)
CHF 77.40 *
Zuletzt angesehen