Motor Driver Board v2 for the BBC micro:bit

CHF 22.70 *
Inhalt: 1 Stück

inkl. MwSt. zzgl. Versandkosten

In der Regel am Lager, Lieferzeit ca. 1-3 Werktage

  • PMR-5620
  • 2
This motor driver board for the BBC micro:bit allows two motors to be driven with forward,... mehr
Produktinformationen "Motor Driver Board v2 for the BBC micro:bit"

This motor driver board for the BBC micro:bit allows two motors to be driven with forward, reverse & stop control, and allows access to the other pins.

This board provides a simple way to add motor driving capability to a BBC micro:bit. It allows two motors to be driven with full forward, reverse & stop control. It has terminal blocks to connect four input devices and a regulated 3V supply is fed in to the 80 way connector to power the inserted BBC micro:bit.

In this new version, the pins from the BBC micro:bit are now broken out to pads on the end of the Motor Driver Board. These pads can either be soldered onto directly, or they are the correct spacing for our PCB pin headers (see image below for a close up of the new pads).

It includes an integrated Edge Connector slot for your BBC micro:bit to easily slot into. It also features external connections to the Buttons A and B inputs. This allows additional switches to be connected to the motor driver board and the state of these can then be read by the BBC micro:bit.

Get up to speed quickly. Example Microsoft TouchDevelop code and example connections in the datasheet (below).

Features:

  • Drive 2 motors with full forward, reverse and stop control.
  • Terminal blocks for easy connection of motors and inputs.
  • 4 inputs (2 analogue inputs and 2 provide external connections to Buttons A and B as inputs).
  • Includes Edge Connector for the BBC micro:bit to slot into.
  • Provide regulated power to the BBC micro:bit.
  • Access the other BBC micro:bit pins easily and conveniently.

Contents:

  • 1 x Edge Connector Motor Driver Board for the BBC micro:bit.

Dimensions:

  • Length: 67mm.
  • Width: 61mm.
  • Height: 18mm.

Requires:

  • 1 x BBC micro:bit.
  • 4.5 - 6V Power Supply.
  • 2 x DC Motors (that are compatible with the power supply used).
  • 1 x Flat-headed Terminal Screwdriver.
Schulstufe: Zyklus 2, Zyklus 3
Fach: Informatik, Medien und Informatik (LP21), Robotik/Mikrokontroller
Sprache: English
Schnittstelle: Bluetooth, USB
Weiterführende Links zu "Motor Driver Board v2 for the BBC micro:bit"
Verfügbare Downloads:
Videos "Motor Driver Board v2 for the BBC micro:bit"

Weitere Info "Motor Driver Board v2 for the BBC micro:bit"

0

Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "Motor Driver Board v2 for the BBC micro:bit"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.
Bitte geben Sie die Zeichenfolge in das nachfolgende Textfeld ein.

Die mit einem * markierten Felder sind Pflichtfelder.

Makey Makey Classic Makey Makey Classic
Inhalt 1 Stück
CHF 59.00 *
PicoBoard PicoBoard
Inhalt 1 Stück
CHF 69.00 *
TIPP!
BBC micro:bit BBC micro:bit vollständiges Starter Kit
Inhalt 1 Paket(e)
CHF 69.00 *
CodeBug CodeBug
Inhalt 1 Stück
CHF 25.90 *
BBC micro:bit, Platine BBC micro:bit, Platine
Inhalt 1 Stück
CHF 22.90 *
BBC micro:bit Erfinder Kit BBC micro:bit Erfinder Kit
Inhalt 1 Stück
CHF 39.50 *
BBC micro:bit Prototyping Kit BBC micro:bit Prototyping Kit
Inhalt 1 Stück
CHF 49.70 *
BBC micro:bit BBC micro:bit vollständiges Starter Kit
Inhalt 1 Paket(e)
CHF 69.00 *
BBC micro:bit Prototyping Kit BBC micro:bit Prototyping Kit
Inhalt 1 Stück
CHF 49.70 *
BBC micro:bit Erfinder Kit BBC micro:bit Erfinder Kit
Inhalt 1 Stück
CHF 39.50 *
BBC micro:bit BBC micro:bit Grundlage Kit
Inhalt 1 Stück
CHF 27.90 *
CodeBug CodeBug
Inhalt 1 Stück
CHF 25.90 *
Flexi-Cables for NXT/EV3 (50 cm) Flexi-Cables for NXT/EV3 (50 cm)
Inhalt 1 Stück
CHF 9.00 *
BBC micro:bit, Platine BBC micro:bit, Platine
Inhalt 1 Stück
CHF 22.90 *
TIPP!
Dynamik-Schienensystem mit Motion Encoder Dynamik-Schienensystem mit Motion Encoder
Inhalt 1 Stück
ab CHF 762.00 *
Combination Linear Position and High Sensitivity Light Sensor Combination Linear Position and High...
Inhalt 1 Stück
CHF 995.00 *
OEK Optics Expansion Kit
Inhalt 1 Paket(e)
CHF 313.80 *
Dexter Industries Breadboard Adapter Dexter Industries Breadboard Adapter
Inhalt 1 Stück
CHF 24.10 *
TETRIX® MAX 24 Tooth Sprocket Pack TETRIX® MAX 24 Tooth Sprocket Pack
Inhalt 2 Stück
CHF 32.55 *
BombiniBot Kit BombiniBot Kit
Inhalt 1 Stück
CHF 150.35 *
Ball Bearing Mounts for LEGO Mindstorms Ball Bearing Mounts for LEGO Mindstorms
Inhalt 4 Stück
CHF 23.75 *
Console Adapter for EV3 Console Adapter for EV3
Inhalt 1 Stück
CHF 31.50 *
NXShield for Arduino NXShield for Arduino
Inhalt 1 Stück
CHF 126.05 *
Sensor building kit for NXT Sensor building kit for NXT
Inhalt 1 Stück
CHF 26.90 *
BBC micro:bit 10 Student Classroom Pack BBC micro:bit 10 Student Classroom Pack
Inhalt 1 Stück
CHF 210.60 *
TIPP!
TI-Innovator Hub TI-Innovator™ Hub Kit
Inhalt 1 Stück
CHF 99.00 * CHF 135.00 *
bat:bit battery case for micro:bit BBC micro:bit, bat:bit battery case
Inhalt 1 Stück
CHF 14.60 *
ASURO Roboter USB Adapter ASURO Roboter USB Adapter
Inhalt 1 Stück
CHF 11.35 * CHF 22.70 *
TIPP!
BrickPi3 Base Kit BrickPi3 Base Kit
Inhalt 1 Stück
CHF 145.80 *
WEDO 2.0 REPLACEMENT PACK 2000715 LE Ersatz Packungen WeDo 3
Inhalt 1 Stück
CHF 7.00 *
ino-bot InO-Bot
Inhalt 1 Stück
CHF 168.50 *
Zuletzt angesehen