Sensor Board for micro:bit

46122_large-monkmakes-sensor-board-microbit_ac4147b4-ba9e-4dd2-942e-ca6151c336eb_800x

46122_additional-monkmakes-sensor-board-microbit_68fd69f3-6ca8-4560-93dc-42ab6cd72a9c_800x

46122_additional-monkmakes-sensor-board-microbit-all-boards_eb125a80-df52-4eb4-b13e-c1f1d83a457c_800x

CHF 21.82*

Preise inkl. MwSt. zzgl. Versandkosten

Produktnummer: KIT-46122

Produktinformationen "Sensor Board for micro:bit"

Description

The MonkMakes Sensor Board allows you to detect sound levels, temperature and light levels. It features ring pad connectors for use with crocodile clips make it easy to connect to the board to a microbit.

Sound Level:
It senses sound level with a MEMs, which is a microphone on a chip that also features a pre-amplifier circuit. You can then use the plot bar graph block in the Microsoft MakeCode editor to display the result on the microbits LED matrix.

Temperature Level:
The temperature output from the board is a voltage that indicates the temperature. This is then measured using an analog input on the micro:bit. If you want your temperatures in Fahrenheit, then multiply the temperature in degrees C by 9, divide the result by 5 and then add 32.

Light Level:
The light sensor uses a photo-transistor to measure the light level and produces an output voltage that increases as the light level increases. It has 3V and GND connectors on both sides of the board which make it possible to power another board, such as the Relay Board or Powered Speaker Board.

Features:

3V and GND connections can be made from either side and allow you to power a second board such as the MonkMakes Relay Board or MonkMakes Speaker.
LED ‘power on’ indicator. Reverse polarity protection.
All three sensors are analog and can be connected to pins P0, P1 and P2 using alligator clips.
Detects sound level with a MEMs (microphone on a chip) and a pre-amplifier.
Uses a thermistor to measure temperature.
Light level detection with a photo-transistor (0 to 1023).
All three sensors are analog and can be connected to pins P0, P1 and P2 using alligator clips.

Contents:

1 x MonkMakes Sensor Board for the BBC micro:bit.

Bildungsstufe:	Tertiäre Bildung, Zyklus 2, Zyklus 3
DataLogger Schnittstellen:	BBC Micro:Bit
Fach:	Informatik, Medien und Informatik (LP21)

0 von 0 Bewertungen

Bewerten Sie dieses Produkt!

Teilen Sie Ihre Erfahrungen mit anderen Kunden.

Anmelden

Ihre E-Mail-Adresse

Ihr Passwort

Bewertungen nur in der aktuellen Sprache anzeigen.

Keine Bewertungen gefunden. Teilen Sie Ihre Erfahrungen mit anderen.

Similar Items

Klimate Board for the BBC micro:bit

Add real-time clock and environment sensing (pressure, temperature, & humidity) capabilities to the micro:bit with the Kitronik RTC Board. MakeCode compatible.

CHF 28.05*

Environment Science Board for micro:bit

Environment Science Board for micro: bit is designed with highly symbolic trees, houses, and snowy mountains. On a wide and easy-to-use PCB, it integrates many sensor modules of nature and science. Including UV sensor, temperature sensor, humidity sensor, air pressure sensor, sound sensor, color sensor, light sensor, water temperature sensor, TDS water quality sensor, buzzer, OLED display, etc. This kit is rich in knowledge, including a wide range of applications. It is initial to observe and ease to play. Extended GPIOs are set and it supports gravity series sensors. The bottom is designed with PMMA (acrylic） to enhance the ease of use and durability. It supports Makecode and Mind + platforms. Power supply: 3.5V~5V (AAA 1.5V Battery x3) GPIO: P1, P2, P8, P12, UART, I2C ML8511 UV sensor BME280 sensor TCS34725 color sensor DS18B20 waterproof temperature sensor TDS water quality sensor Capacitive soil moisture sensor WS2812-RGB-LED Dimension: 196mm×110.6mm Programming platform: Makecode and Mind+

CHF 109.00*

Enviro:Bit

Sense the world around you with enviro:bit! It's loaded with sensors for air and weather, colour and light, and sound, and slots right onto your micro:bit. Just slot in your micro:bit, then code enviro:bit with the block-based Microsoft MakeCode editor, or with MicroPython in the Mu code editor. The sensors go hand-in-hand really well with the LED matrix on micro:bit, letting you graph sensors readings or have the LEDs react to sound, for example. Features Comes fully-assembled and ready to use BME280 temperature, pressure, and humidity sensor TCS3472 light and colour sensor MEMS microphone Compatible with micro:bit Microsoft MakeCode and MicroPython support No soldering required!

CHF 30.13*

Moisture Sensor for micro:bit

The moisture sensor for micro:bit allows your micro:bit to detect moisture, so if your plant is thirsty you'll know about it! or how about using one and a couple of micro:bits to tell you when your bath has reached the correct level? To hook this up to your micro bit you will require alligator cables alternatively you can solder headers or a screw terminal to the board to make hooking it up to your other micro controller projects a dream.

CHF 14.49*

noise:bit micro:bit Kit

Sew and code a sleepy lion with our noise:bit micro:bit kit. Be careful not to shake the lion or you'll wake it up and make it roar! You can even make your lion sing (code it to play songs)!Our Pimoroni bit:kits make it simple for anyone to get started with making and coding! They contain everything* you need to build them, learn how to use them, and code them. They include friendly instruction cards, a cable to connect and code the micro:bit, and a battery pack to keep your code running when you've disconnected from your computer. *Just add a desktop or tablet computer to code your micro:bit Kit contents micro:bit Pimoroni noise:bit board Sleepy lion felt pieces Yellow embroidery thread Sewing needles Battery box (includes 2x AAA batteries) Micro-USB cable Instruction/activity cards Sticker sheet Reusable kit box Activities included Sewing your sleepy lion Making sounds with MakeCode Don't wake the lion! Playing a tune noise:bit features Comes fully-assembled and ready to use TPA301 amplifier chip 8Ω 2W Mylar speaker Compatible with micro:bit No soldering required!

CHF 45.71*

Math & Automatic Touch Keyboard for micro:bit

This is a Math & Automatic expansion board for micro:bit. Easy to use, and suitable for a wide range of applications. We designed this board for two sorts of application scenarios: math game and automation control. The 16 programmable touch keys and RGB LEDs on the board offers rich function and flexible input and output. Besides, the board has 1 vibration motor, 1 buzzer, 2 motor ports, 2 servo ports and 9 expansion ports, which lays a foundation for using in automation controlling application. FEATURESMath Game: 1.Calculator 2.Quick Calculation 3.Math Reasoning Game 4.Lucky number 5.Twenty-One 6.Whack a Mole 7.The mystery of Dazzling Numbers More...... Automatic Control: 1.RGB Waterfall Light 2.Touch Music 3.Password Lock 4.Motor Control System 5.Touch Remote Wireless Handle 6. Countdown Timer 7. Natural wind Electric Fan 8. NFC Password Entrance Guard 9. 2. 4G Multiplex Communication System More......

CHF 40.50*