Twist this dimmer back and forth to control your circuit. As you twist the knob clockwise, more signal goes to the Bits that follow, brightening lights, speeding up motors, or raising the volume on buzzers.

Der powerSnap liefert Strom an einen offenen Eingang ohne zusätzliche Gabeln, Splits oder Netzteile. Enthält 3 powerSnaps.

Sie wissen, was eine Taste ist! Es ist ein Klassiker: gross, rund und federnd. Drücken Sie die Taste, um Ihre Kreation zu aktivieren, und lassen Sie es los, um sie zu deaktivieren. Schnappen Sie einen Buzzer anstelle Ihrer Taste um Signale im Morsecode auszuspielen.

The brick adapter enables you to easily snap your Bits to LEGO® bricks. Each pack comes with 8 brick adapter studs and sockets.

The timeout Bit is a settable timer. Try it after a button and follow it with a light. Press and release the button to start the countdown.

The NAND Bit is a logic gate with 2 inputs. Think of it as "not and." The NAND Bit will always send an ON signal unless both input 1 and input 2 are receiving an ON signal. It’s the exact opposite of the AND Bit.

The Rechargeable battery is a portable power source for your inventions, which you can use over and over again. The USB cable brings power to your USB power Bit and rechargeable battery. (USB Cable not included)

The littleBits micro:bit Adapter connects micro:bit and littleBits enabling new learning experiences and creative inventions in a less-intimidating way. Enhance your learning with micro:bit by adding coding to your littleBits using platforms like the free Microsoft MakeCode or Python editor. It works by connecting the signals from the littleBits input and output bitsnaps to pins on the micro:bit edge connectors. No special coding libraries are needed. * micro:bit is required for use & sold separately

Der Gleichstrom Motor um eine kleine Achse, an der Sie alles anbringen können. Versuchen Sie, ein Rad anzuschliessen! Verwenden Sie es zum Drehen, Wenden und Rollen.

Der Slide dimmer funktioniert wie ein heller Dimmer zu Hause, oder ein Lautstärkeregler im Aufnahmestudio. Sie steuern den Slide dimmer Bit, indem Sie seinen Hebel von einem Ende des Bits zum Anderen bewegen. Verwenden Sie es mit einer LED für einige einstellbare Stimmungsbeleuchtung.

Das  UV LED sendet ein spezielles Licht aus. Für das menschliche Auge sieht es violett aus, jedoch besitzt es einige besondere fähigkeiten. Zum Beispiel leutet weisser Stoff und einige Farben unter UV-Licht.

Sie können Ihre BitSnaps kabellos steuern wenn sie das Wireless-receiver Bit und das Wireless-transmitter Bit in Ihren BitSnap einbauen. Der Transmitter kodiert die Daten und schickt sie zum receiver. So wird ermöglicht, dass Sie mit LittleBits ein ferngesteuertes Auto bauen können.

The bend sensor turns on as you flex the long strip. To send signal to your output Bits, bend the strip down, towards the Bit's feet. But make sure not to crease it - that could damage your Bit! Try it with a bargraph to test its sensitivity.

With this Bit, you can control your circuits with motion. The motion trigger is similar to the sensor on an automatic door: when someone is moving nearby, it sends an ON signal to the following Bits. It's very sensitive, so don't move a muscle unless you want to be detected! Try it with some LEDs to create a security light.

The branch Bit gives you more options for connecting your Bits: it lets you connect the output of a single Bit to as many as 3 others, oriented in different directions. Use it when you want to trigger light, sound and motion at the same time.

The NOR Bit is a logic gate with 2 inputs. It sends an ON signal only when neither input is receiving an ON signal. In other words, it’s the exact opposite of the OR Bit. The NOR Bit is good for inventions in which you want the output to be ON, unless 1 or both of its inputs are triggered.

With this Bit, you can control your circuits with motion. The motion trigger is similar to the sensor on an automatic door: when someone is moving nearby, it sends an ON signal to the following Bits. It's very sensitive, so don't move a muscle unless you want to be detected! Try it with some LEDs to create a security light.

The double AND Bit is a logic gate with 2 inputs. It sends an ON signal from its output only when input 1 AND input 2 are both receiving an ON signal.

The vibration motor is very similar to the device that makes your cellphone shake when you get a text. With this Bit, you can make anything vibrate and buzz! This Bit also includes the vibeSnap-- an accessory that helps you attach stuff - like paper, tin foil, or a pipecleaner - to the motor.

Denken Sie an die Schwelle als eine Mautstelle. Wenn das Signal durch eine Schaltung vorbeigeht, entscheidet die Schwelle, ob sie fortfahren kann oder nicht. Benutzen Sie es, um jeden Sensor Bit (wie ein Temperatursensor) in einen Trigger-Bit zu verwandeln.

Das MaKey MaKey-Board ist eine kleine Platine, mit dem sich leitfähige Objekte in Computertasten umwandeln lassen. Innert kürzester Zeit lassen sich damit kreative, auf Berührungen reagierende Installationen herstellen: Musikinstrumente, Computerspiele und vieles mehr! Dies ist ein Ergänzungsset zum Littlebits Premium Kit. The MAKEY MAKEY Bit turns everyday conductive objects (like bananas) into triggers that control your circuit and even your computer. You can connect the MAKEY MAKEY Bit to these objects using alligator clips.   When you connect the MAKEY MAKEY Bit to your computer with the micro USB cable it can act like a keyboard or mouse, controlling LEFT ARROW, RIGHT ARROW, and SPACE/ CLICK. For example, when you touch the SPACE/CLICK pad and an EARTH pad, it is the same as pressing the spacebar or left click on your mouse. The MAKEY MAKEY is able to turn everyday objects into touchpads by using the object or conductive material to complete a connection between either one of the EARTH pads and any one of the three keypads (LEFT ARROW, RIGHT ARROW, SPACE/CLICK). To get a quick sense of how this works, hook up a power Bit to any of the three input bitSnaps of your MAKEY MAKEY Bit, and turn the power on. Place one finger on the EARTH pad, then another finger on any of the three keypads – the signal indicator (small LEDs below each keypad) for the corresponding keypad should light up, because you are conductive!   POWER The MAKEY MAKEY Bit can run on both the 9V(p1) and USB(p3) power Bits. The power Bit can be connected to any of the three input bitSnaps on your MAKEY MAKEY Bit, but will only power the input Bits that it is snapped to. If you want to power all three inputs with a single power, you will need to use a fork or powerSnaps. The MAKEY MAKEY Bit does not draw power through its micro USB port – it will require a power input when connected to a computer.     CONDUCTIVE MATERIAL Using your alligator clips, you can connect your MAKEY MAKEY Bit to almost anything. Attach an alligator clip to one of the EARTH pads and another alligator clip to any one of the three keypads (LEFT ARROW, RIGHT ARROW, SPACE/CLICK). Attach the free ends of the alligator clips to objects and materials around your household to see if they are conductive.   Keep in mind that touching the free end of the alligator clips with your hands will complete a connection, triggering the MAKEY MAKEY Bit – this might make you think an object is conductive, even if it isn’t. All metals are conductive in varying degrees of sensitivity. Aluminum foil and aluminized tape are especially handy for making conductive surfaces. Most fruits and vegetables are also conductive because of the water inside them, which means you might have to poke the alligator clips into the fruit or vegetable to use it as a touchpad. Water is also conductive, but keep in mind that the MAKEY MAKEY Bit is NOT waterproof. Any kind of insulated wire is also great for giving your MAKEY MAKEY Bit some reach. This is particularly useful if you are working on a larger scale, and want to have touchpads set up throughout a larger space. Instead of wire, you can also use conductive thread, which you can easily find online. The thing to keep in mind about conductive thread is that it is un-insulated, which means that any contact with any point on the thread will complete a connection, and trigger the MAKEY MAKEY Bit.   MAKEY MAKEY OUTPUTS When using the MAKEY MAKEY Bit, note that the keypad you select (LEFT ARROW, RIGHT ARROW, SPACE/CLICK) will correspond to the output bitSnaps directly across from those keypads.   You can use the MAKEY MAKEY Bit to trigger any output Bits. One thing to keep in mind is that your output will be active only while you complete the connection between the EARTH pad and one (or all) of the three keypads (LEFT ARROW, RIGHT ARROW, SPACE/CLICK)  – the output stops as soon as you break the circuit. For added complexity and interactivity try adding input Bits between the MAKEY MAKEY Bit and the output Bits you want to activate. In this way, you’ll only be able to activate the outputs by both completing a connection on the MAKEY MAKEY Bit AND triggering your input Bits at the same time.     Also make sure to visit MAKEY MAKEY’s website to check out more tips and tricks, as well as some awesome computer programs and games that can you can using your MAKEY MAKEY and other Bits.

Benutzen sie das Latch-Bit um jedes Input-Bit wie einen Knopf oder Hebel als An / Aus Schalter zu benutzen.

Das Bright LED ist ein hell leuchtendes, weisses LED. Benutzen Sie es um licht in ihre Erfindungen zu bringen. Es funktioniert wie die anderen LED- Bits jedoch produziert das Bright-LED viel mehr Licht.

The CV Bit lets you integrate synth Bits with other analog synthesizers like modular synths or analog keyboards. Control the pitch of oscillators and cutoff frequency of filters, control analog synthesizers with Bits, or create new control interfaces for your synth.