Pokit Meter
CHF 124.00*
No longer available. Please contact our service hotline at the bottom of this page if you have any questions.
Product number:
PKT-MTR
Product information "Pokit Meter"
- All-in-one multimeter, oscilloscope (one-time) and logger
- Fits on your keychain so you can take it anywhere
- Connects to your phone via Bluetooth; 60VDC/42VAC (RMS), 2A
- Suitable for low voltage electronics work (Arduino, Raspberry Pi), automotive applications etc.
- 1-year warranty, 30-day money-back guarantee
INCLUDES:
- Pokit Meter, carry pouch, wire grip probes, battery, spare fuse
| Betriebsystem: | Android, iOS |
|---|---|
| Bildungsstufe: | Diploma/High School, Diploma/ Vocational/ Uni, Middle years |
| Fach: | physics, renewable energy |
| Fachbereich: | Informatik - ICT, Medien & Informatik - M&I, Natur, Mensch, Gesellschaft - NMG, Physik |
| Schnittstelle: | BlueTooth |
Login
Skip product gallery
Accessory Items
Kitronik Discovery Kit for the BBC micro:bit
CHF 20.00*
Das Kitronik Discovery Kit für den BBC microbit ist eine grossartige Möglichkeit, um sowohl Programmierung als auch Elektronik kennenzulernen. Das Kit enthält fünf Experimente, die sehr einfach beginnen und sich dann zu realen Systemen steigern, wenn das Selbstvertrauen wächst.
Das beiliegende Booklet geht von keinerlei Vorwissen aus und enthält detaillierte Informationen zu allem, was der neue Benutzer wissen muss. Es behandelt alles von der Verwendung eines Prototyping-Boards bis hin zur Verwendung des Microsoft MakeCode Editors und allem dazwischen. Dies ist das ideale Kit für jemanden, der neu im Umgang mit dem micro:bit, Elektronik und Programmierung ist.
Das Kit enthält fünf Experimente und alle Komponenten, die zur Durchführung erforderlich sind. Jedes Experiment enthält einen vollständigen Code-Durchlauf, einen Schaltplan und eine obere Breadboard-Ansicht, vollständige Erklärungen dessen, was passiert, und wie die Elektronik funktionieren.
Benötigt werden:
1 x micro:bit
1 x USB Type-A auf Micro-B USB Noodle Kabel.
Hinweis:
Dieses Kit enthält keinen micro:bit. Ein micro:bit kann hier erworben werden.
Es ist keine Lötung erforderlich und Sie können Ihre erste Schaltung in wenigen Minuten bauen!
Merkmale:
Dieses Kit bietet eine grossartige Einführung in Programmierung und Elektronik.
Keine Lötung erforderlich - bauen Sie Ihre erste Schaltung in wenigen Minuten!
Machen Sie die 5 Experimente im schrittweisen Tutorial-Buch und lernen Sie dabei.
Alle Teile sind enthalten, um die 5 Experimente durchzuführen.
Nach Abschluss aller Experimente haben Sie das perfekte Prototypensystem für weitere Abenteuer mit dem micro:bit.
Der Code kann im einfach zu bedienenden MakeCode-Editor von Microsoft erstellt werden.
Inhalt:
1 x Breadboard Breakout für den BBC micro:bit.
1 x Kleines Prototyping-Breadboard.
2 x Rote 10mm LED.
2 x Gelbe 10mm LED.
2 x Grüne 10mm LED.
10 x 330 Ω Widerstand.
1 x Piezo-Element-Summer.
10 x Male-to-Male-Jumper-Kabel.
Die beiliegenden Experimente sind:
LED-Steuerungsschaltung.
Buzzer Jukebox.
Lichter in Sequenz.
Digitaler LED-Thermometer.
Ampel mit Fussgängerüberweg.
Tip
Pokit PRO
From
CHF 185.00*
Pokit Pro is an all-in-one multimeter, oscilloscope and logger with unprecedented portability, accuracy and versatility. Free yourself from the bench and take your creativity to new places!
Pokit Pro connects seamlessly to the smartphone app to measure a wide range of parameters. These include voltage, current, resistance, capacitance and temperature. It also provides continuity and diode checking.
Building on the success of Pokit Meter with many feature enhancements, Pokit Pro is ideal for electronics, automotive applications, home electrical and much more.
All-in-one multimeter, oscilloscope (real-time) and logger
Pen Style that fits in your pocket
Connects to your phone via Bluetooth
CAT III, 600V, 10A
Multichannel (up to 4 devices)
Suitable for mains voltage home DIY, field tech etc.
Rechargeable battery (USB-C)
INCLUDES:
Pokit Pro, Hard Case, Probe Clips, Probe Tip Cover, Charging Cable (USB-C)
SparkFun's Inventor Kit for Arduino
CHF 124.00*
The SparkFun Inventor’s Kit (SIK) is a great way to get started with programming and hardware interaction with the Arduino programming language. The SIK includes everything you need to complete 16 circuits that will teach you how to read sensors, display information on an LCD, drive motors, and more. You don’t need any previous programming or electronics experience to use this kit.
The full-color SIK Guidebook (included) contains step by step instructions of how to connect each circuit with the included parts. Full example code is provided and explained and even includes troubleshooting tips if something goes wrong.
The kit does not require any soldering and is recommended for beginners ages 10 and up. Version 3.2 of the kit adds a new Simon Says circuit experiment with all the LEDs and tactile buttons you will need to complete it, and a new full-color guidebook.
Circuit Examples:
Circuit 1: Blinking an LED
Circuit 2: Reading a Potentiometer
Circuit 3: Driving and RGB LED
Circuit 4: Driving Multiple LEDs
Circuit 5: Push Buttons
Circuit 6: Reading a Photo Resistor
Circuit 7: Reading a Temperature Sensor
Circuit 8: Driving a Servo Motor
Circuit 9: Using a Flex Sensor
Circuit 10: Reading a Soft Potentiometer
Circuit 11: Using a Buzzer
Circuit 12: Driving a Motor
Circuit 13: Using Relays
Circuit 14: Using a Shift Register
Circuit 15: Using an LCD
Circuit 16: Simon Says
Kit Includes:
SparkFun RedBoard
Arduino and Breadboard Holder
SparkFun Inventor’s Kit Guidebook
White Solderless Breadboard
Carrying Case
SparkFun Mini Screwdriver
16x2 White on Black LCD (with headers)
74HC595 Shift Register
2N2222 Transistors
1N4148 Diodes
DC Motor with Gear
Small Servo
SPDT 5V Relay
TMP36 Temp Sensor
Flex sensor
Softpot
6' SparkFun USB Cable
Jumper Wires
Photocell
Tri-color LED
Red, Blue, Yellow, and Green LEDs
Red, Blue, Yellow, and Green Tactile Buttons
10K Trimpot
Piezo Speaker
330 and 10K Resistors
Documents:
SIK Guide
Online Experiment Guide
SIK Teaching Curriculum
SIK Code Library
Dimensional Drawing (Carrying Case)
SIK V3.2 Wish List
Arduino Starter Kit
From
CHF 125.00*
This kit walks you through the basics of using the Arduino in a hands-on way. You'll learn through building several creative projects. The kit includes a selection of the most common and useful electronic components with a book of 15 projects. Starting the basics of electronics, to more complex projects, the kit will help you control the physical world with sensor and actuators.
The projects in the kit are:
01 GET TO KNOW YOUR TOOLS an introduction to the concepts you'll need to use this kit
02 SPACESHIP INTERFACE design to control panel for your startship
03 LOVE-O-METER measure how hot-blooded you are
04 COLOR MIXING LAMP produce any color with a lamp that uses light as an input
05 MOOD CUE clue people in to how you're doing
06 LIGHT THEREMIN create a musical instrument you play by waving your hands
07 KEYBOARD INSTRUMENT play music and make some noise with this keyboard
08 DIGITAL HOURGLASS a light-up hourglass that can stop you from working too much
09 MOTORIZED PINWHEEL a color wheel that will have your head spinning
10 ZOETROPE create a mechanical animation you can play forward or reverse
11 CRYSTAL BALL a mystical tour to answer all your tough question
12 KNOCK LOCK tap out the secret code to open the door
13 TOUCHY-FEEL LAMP a lamp that responds to your touch
14 TWEAK THE ARDUINO LOGO control your personal computer from your Arduino
15 HACKING BUTTONS
create a master control for all your devices! Once you’ve mastered this knowledge, you’ll have a palette of software and circuits that you can use to create something beautiful, and make someone smile with what you invent.
The kit includes:
1 Arduino Projects Book (170 pages)
1 Arduino UNO board rev.3 1 USB cable
1 Breadboard
1 Easy-to-assemble wooden base
1 9v battery snap
70 Solid core jumper wires
2 Stranded jumper wires 6 Photoresistor
3 Potentiometer 10kilohm
10 Pushbuttons
1 Temperatursensor
1 Tilt sensor
1 LCD alphanumeric (16x2 characters)
1 LED (bright white)
1 LED (RGB) 8 LEDs (red)
8 LEDs (green)
8 LEDs (yellow)
3 LEDs (blue)
1 Small DC motor 6/9V
1 Small servo motor
1 Piezo capsule
1 H-bridge motor driver
2 Optocouplers
5 Transistor
2 Mosfet transistors
5 Capacitors 100nF
3 Capacitors 100uF
5 100pF capacitor
5 Diodes
3 Trasparent gels (red, green, blue)
1 Male pins strip (40x1)
20 Resistors 220 ohm
5 Resistors 560 ohm
5 Resistors 1 kilohm
5 Resistors 4.7 kilohm
10 Resistors 10 kilohm
5 Resistors 1 megohm
5 Resistors 10 megohm
Pokit Meter Fuse Set
CHF 31.00*
The Pokit Meter Fuse Set is what we call the debugging survival kit. Includes 5 spare fuses with fuse covers and an extra set of wire grip probes.
NOT COMPATIBLE WITH POKIT PRO
PlayGround for BBC Micro:Bit - Starter Kit
CHF 46.75*
This is an exciting new way to use your micro:bit, with addon components, but without requiring crocodile clips which can be difficult for small people to use.
Also, this new approach allows the use of a single cable for most addons, instead of 3 crocodile clips
See the 4T blog for detailed usage and programming information
This Starter Kit Includes:
Playground for Micro:Bit (Micro:Bit is optional extra)
4 x Connection Cables
Traffic Light Gizmo
Dial Gizmo
Buzzer Gizmo
2 x Flame Gizmos
Prototyping Gizmo
Features:
Fittings for your BBC micro:bit (micro:bit not included, unless selected)
Battery holder for 2xAA batteries permanently fitted (batteries not included)
Sturdy On/Off switch
Blue power indicator LED
White LEDs on all 3 inputs to show when active
All Micro:Bit Input / Outputs are brought to croc clip compatible connectors so you can continue to use existing components
Each new connector includes the signal as well as power and ground
Fast and easy to connect