Skip to main content Skip to search Skip to main navigation

Arduino Starter Kit

Product information "Arduino Starter Kit"

This kit walks you through the basics of using the Arduino in a hands-on way. You'll learn through building several creative projects. The kit includes a selection of the most common and useful electronic components with a book of 15 projects. Starting the basics of electronics, to more complex projects, the kit will help you control the physical world with sensor and actuators. 

The projects in the kit are:   

 

  • 01 GET TO KNOW YOUR TOOLS an introduction to the concepts you'll need to use this kit
  • 02 SPACESHIP INTERFACE design to control panel for your startship
  • 03 LOVE-O-METER measure how hot-blooded you are
  • 04 COLOR MIXING LAMP produce any color with a lamp that uses light as an input
  • 05 MOOD CUE clue people in to how you're doing
  • 06 LIGHT THEREMIN create a musical instrument you play by waving your hands
  • 07 KEYBOARD INSTRUMENT play music and make some noise with this keyboard
  • 08 DIGITAL HOURGLASS a light-up hourglass that can stop you from working too much
  • 09 MOTORIZED PINWHEEL a color wheel that will have your head spinning
  • 10 ZOETROPE create a mechanical animation you can play forward or reverse
  • 11 CRYSTAL BALL a mystical tour to answer all your tough question
  • 12 KNOCK LOCK tap out the secret code to open the door
  • 13 TOUCHY-FEEL LAMP a lamp that responds to your touch
  • 14 TWEAK THE ARDUINO LOGO control your personal computer from your Arduino
  • 15 HACKING BUTTONS

 

create a master control for all your devices!  Once you’ve mastered this knowledge, you’ll have a palette of software and circuits that you can use to create something beautiful, and make someone smile with what you invent. 

The kit includes:

  • 1 Arduino Projects Book (170 pages)
  • 1 Arduino UNO board rev.3 1 USB cable
  • 1 Breadboard
  • 1 Easy-to-assemble wooden base
  • 1 9v battery snap
  • 70 Solid core jumper wires
  • 2 Stranded jumper wires 6 Photoresistor
  • 3 Potentiometer 10kilohm
  • 10 Pushbuttons
  • 1 Temperatursensor
  • 1 Tilt sensor
  • 1 LCD alphanumeric (16x2 characters)
  • 1 LED (bright white)
  • 1 LED (RGB) 8 LEDs (red)
  • 8 LEDs (green)
  • 8 LEDs (yellow)
  • 3 LEDs (blue)
  • 1 Small DC motor 6/9V
  • 1 Small servo motor
  • 1 Piezo capsule
  • 1 H-bridge motor driver
  • 2 Optocouplers
  • 5 Transistor
  • 2 Mosfet transistors
  • 5 Capacitors 100nF
  • 3 Capacitors 100uF
  • 5 100pF capacitor
  • 5 Diodes
  • 3 Trasparent gels (red, green, blue)
  • 1 Male pins strip (40x1)
  • 20 Resistors 220 ohm
  • 5 Resistors 560 ohm
  • 5 Resistors 1 kilohm
  • 5 Resistors 4.7 kilohm
  • 10 Resistors 10 kilohm
  • 5 Resistors 1 megohm
  • 5 Resistors 10 megohm   
Bildungsstufe: Diploma/ Vocational/ Uni, Middle years
DataLogger Schnittstellen: Arduino
Fach: Robotics/ Microcontrollers, informatics, informatics
language: English, French, German, Italian

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Skip product gallery

Accessory Items

Arduino Classroom Kit Starter Pack
This kit walks you through the basics of using the Arduino in a hands-on way. You'll learn through building several creative projects. The kit includes a selection of the most common and useful electronic components with a book of 15 projects. Starting the basics of electronics, to more complex projects, the kit will help you control the physical world with sensor and actuators.  The projects in the kit are:      01 GET TO KNOW YOUR TOOLS an introduction to the concepts you'll need to use this kit 02 SPACESHIP INTERFACE design to control panel for your startship 03 LOVE-O-METER measure how hot-blooded you are 04 COLOR MIXING LAMP produce any color with a lamp that uses light as an input 05 MOOD CUE clue people in to how you're doing 06 LIGHT THEREMIN create a musical instrument you play by waving your hands 07 KEYBOARD INSTRUMENT play music and make some noise with this keyboard 08 DIGITAL HOURGLASS a light-up hourglass that can stop you from working too much 09 MOTORIZED PINWHEEL a color wheel that will have your head spinning 10 ZOETROPE create a mechanical animation you can play forward or reverse 11 CRYSTAL BALL a mystical tour to answer all your tough question 12 KNOCK LOCK tap out the secret code to open the door 13 TOUCHY-FEEL LAMP a lamp that responds to your touch 14 TWEAK THE ARDUINO LOGO control your personal computer from your Arduino 15 HACKING BUTTONS   create a master control for all your devices!  Once you’ve mastered this knowledge, you’ll have a palette of software and circuits that you can use to create something beautiful, and make someone smile with what you invent.  The kit includes: 1 Arduino Projects Book (170 pages) 1 Arduino UNO board rev.3 1 USB cable 1 Breadboard 1 Easy-to-assemble wooden base 1 9v battery snap 70 Solid core jumper wires 2 Stranded jumper wires 6 Photoresistor 3 Potentiometer 10kilohm 10 Pushbuttons 1 Temperatursensor 1 Tilt sensor 1 LCD alphanumeric (16x2 characters) 1 LED (bright white) 1 LED (RGB) 8 LEDs (red) 8 LEDs (green) 8 LEDs (yellow) 3 LEDs (blue) 1 Small DC motor 6/9V 1 Small servo motor 1 Piezo capsule 1 H-bridge motor driver 2 Optocouplers 5 Transistor 2 Mosfet transistors 5 Capacitors 100nF 3 Capacitors 100uF 5 100pF capacitor 5 Diodes 3 Trasparent gels (red, green, blue) 1 Male pins strip (40x1) 20 Resistors 220 ohm 5 Resistors 560 ohm 5 Resistors 1 kilohm 5 Resistors 4.7 kilohm 10 Resistors 10 kilohm 5 Resistors 1 megohm 5 Resistors 10 megohm   

Content: 6 Paket(e) (CHF 99.17* / 1 Paket(e))

From CHF 595.00*
Tip
Pokit Meter
All-in-one multimeter, oscilloscope (one-time) and logger Fits on your keychain so you can take it anywhere Connects to your phone via Bluetooth; 60VDC/42VAC (RMS), 2A Suitable for low voltage electronics work (Arduino, Raspberry Pi), automotive applications etc. 1-year warranty, 30-day money-back guarantee INCLUDES: Pokit Meter, carry pouch, wire grip probes, battery, spare fuse 

From CHF 119.44*
ServoSix
The Servo Six board simplifies the process of connecting up to six servo motors to a Raspberry Pi or Arduino.

CHF 73.00*
Skip product gallery

Similar Items

EV3 Sensor Adapter for NXT or Arduino
With this adapter the new Lego Mindstorms EV3 sensors can be connected to the intelligent Lego Mindstorms NXT stone or the Arduino board. This adapter is a UAR converter.  For NXT, works with BricxCC and later EV3 IDE for NXT Apply with Arduino, NXShield or I2C access point board Lightweight and small design that fits linearly to the sensors and module Provides UART with I2C interface

CHF 80.00*
EVShield with Arduino Uno compatible board bundle
This ball caster comes with two balls, one of plastic and one of metal. You can attach it to your NXT and replace the balls according to your preference.

CHF 15,063.00*
Tip
Arduino Alvik
Get ahead with every move! Arduino Alvik is a powerful and versatile robot car designed specifically for programming and robotics education. Powered by Arduino Nano ESP32, Arduino Alvik offers a diverse learning path through block-based to MicroPython programming languages and enables various ways to explore robotics, IoT and AI. Content - Pre-assembled robot included: - 1x Arduino Nano ESP32 board - 1x Arduino Alvik - 1x 18650 rechargeable battery - Accessories included: 1x USB-C cable (1 mt) The main features of Arduino Alvik: - Unified and clean design:  > Unique and high quality design of the robot to create a compact and stable product. - Powerful and versatile:  > Powered by ESP32 and with color sensors, line follower sensors, distance sensor, multi-axis         accelerometer and gyroscope, proximity and ambient light sensor. It is also possible to connect up to two servomotors. - Programming in several languages:  > Coding the robot with microPython, Arduino C and block-based programming - High-quality components:  > Precision motor with encoders enables higher consistency and better performance - Expandability:  > Use the robot for IoT and AI projects and expand the structure with M3 screws and Lego connectors.   > Connect external sensors to the Grove and QWIIC plug-and-play connectors. - Replaceable battery:  > Easily change and recharge the battery for long-lasting performance

CHF 125.00*