Arduino Classroom Kit Starter Pack
CHF 595.00*
Content:
6 Paket(e)
(CHF 99.17* / 1 Paket(e))
Available. If the available stock is exceeded, no additional units of this item can be added to the cart. If you have any questions, please contact the service hotline at the bottom of this page.
Product number:
ARD-K040007-6P
Product information "Arduino Classroom Kit Starter Pack"
This kit walks you through the basics of using the Arduino in a hands-on way. You'll learn through building several creative projects. The kit includes a selection of the most common and useful electronic components with a book of 15 projects. Starting the basics of electronics, to more complex projects, the kit will help you control the physical world with sensor and actuators.
The projects in the kit are:
- 01 GET TO KNOW YOUR TOOLS an introduction to the concepts you'll need to use this kit
- 02 SPACESHIP INTERFACE design to control panel for your startship
- 03 LOVE-O-METER measure how hot-blooded you are
- 04 COLOR MIXING LAMP produce any color with a lamp that uses light as an input
- 05 MOOD CUE clue people in to how you're doing
- 06 LIGHT THEREMIN create a musical instrument you play by waving your hands
- 07 KEYBOARD INSTRUMENT play music and make some noise with this keyboard
- 08 DIGITAL HOURGLASS a light-up hourglass that can stop you from working too much
- 09 MOTORIZED PINWHEEL a color wheel that will have your head spinning
- 10 ZOETROPE create a mechanical animation you can play forward or reverse
- 11 CRYSTAL BALL a mystical tour to answer all your tough question
- 12 KNOCK LOCK tap out the secret code to open the door
- 13 TOUCHY-FEEL LAMP a lamp that responds to your touch
- 14 TWEAK THE ARDUINO LOGO control your personal computer from your Arduino
- 15 HACKING BUTTONS
create a master control for all your devices! Once you’ve mastered this knowledge, you’ll have a palette of software and circuits that you can use to create something beautiful, and make someone smile with what you invent.
The kit includes:
- 1 Arduino Projects Book (170 pages)
- 1 Arduino UNO board rev.3 1 USB cable
- 1 Breadboard
- 1 Easy-to-assemble wooden base
- 1 9v battery snap
- 70 Solid core jumper wires
- 2 Stranded jumper wires 6 Photoresistor
- 3 Potentiometer 10kilohm
- 10 Pushbuttons
- 1 Temperatursensor
- 1 Tilt sensor
- 1 LCD alphanumeric (16x2 characters)
- 1 LED (bright white)
- 1 LED (RGB) 8 LEDs (red)
- 8 LEDs (green)
- 8 LEDs (yellow)
- 3 LEDs (blue)
- 1 Small DC motor 6/9V
- 1 Small servo motor
- 1 Piezo capsule
- 1 H-bridge motor driver
- 2 Optocouplers
- 5 Transistor
- 2 Mosfet transistors
- 5 Capacitors 100nF
- 3 Capacitors 100uF
- 5 100pF capacitor
- 5 Diodes
- 3 Trasparent gels (red, green, blue)
- 1 Male pins strip (40x1)
- 20 Resistors 220 ohm
- 5 Resistors 560 ohm
- 5 Resistors 1 kilohm
- 5 Resistors 4.7 kilohm
- 10 Resistors 10 kilohm
- 5 Resistors 1 megohm
- 5 Resistors 10 megohm
| Bildungsstufe: | Diploma/ Vocational/ Uni, Middle years |
|---|---|
| DataLogger Schnittstellen: | Arduino |
| Fach: | Robotics/ Microcontrollers, informatics, informatics |
| language: | English, French, German, Italian |
Login
Skip product gallery
Accessory Items
Arduino Starter Kit
From
CHF 125.00*
This kit walks you through the basics of using the Arduino in a hands-on way. You'll learn through building several creative projects. The kit includes a selection of the most common and useful electronic components with a book of 15 projects. Starting the basics of electronics, to more complex projects, the kit will help you control the physical world with sensor and actuators.
The projects in the kit are:
01 GET TO KNOW YOUR TOOLS an introduction to the concepts you'll need to use this kit
02 SPACESHIP INTERFACE design to control panel for your startship
03 LOVE-O-METER measure how hot-blooded you are
04 COLOR MIXING LAMP produce any color with a lamp that uses light as an input
05 MOOD CUE clue people in to how you're doing
06 LIGHT THEREMIN create a musical instrument you play by waving your hands
07 KEYBOARD INSTRUMENT play music and make some noise with this keyboard
08 DIGITAL HOURGLASS a light-up hourglass that can stop you from working too much
09 MOTORIZED PINWHEEL a color wheel that will have your head spinning
10 ZOETROPE create a mechanical animation you can play forward or reverse
11 CRYSTAL BALL a mystical tour to answer all your tough question
12 KNOCK LOCK tap out the secret code to open the door
13 TOUCHY-FEEL LAMP a lamp that responds to your touch
14 TWEAK THE ARDUINO LOGO control your personal computer from your Arduino
15 HACKING BUTTONS
create a master control for all your devices! Once you’ve mastered this knowledge, you’ll have a palette of software and circuits that you can use to create something beautiful, and make someone smile with what you invent.
The kit includes:
1 Arduino Projects Book (170 pages)
1 Arduino UNO board rev.3 1 USB cable
1 Breadboard
1 Easy-to-assemble wooden base
1 9v battery snap
70 Solid core jumper wires
2 Stranded jumper wires 6 Photoresistor
3 Potentiometer 10kilohm
10 Pushbuttons
1 Temperatursensor
1 Tilt sensor
1 LCD alphanumeric (16x2 characters)
1 LED (bright white)
1 LED (RGB) 8 LEDs (red)
8 LEDs (green)
8 LEDs (yellow)
3 LEDs (blue)
1 Small DC motor 6/9V
1 Small servo motor
1 Piezo capsule
1 H-bridge motor driver
2 Optocouplers
5 Transistor
2 Mosfet transistors
5 Capacitors 100nF
3 Capacitors 100uF
5 100pF capacitor
5 Diodes
3 Trasparent gels (red, green, blue)
1 Male pins strip (40x1)
20 Resistors 220 ohm
5 Resistors 560 ohm
5 Resistors 1 kilohm
5 Resistors 4.7 kilohm
10 Resistors 10 kilohm
5 Resistors 1 megohm
5 Resistors 10 megohm
ServoSix
CHF 73.00*
The Servo Six board simplifies the process of connecting up to six servo motors to a Raspberry Pi or Arduino.
Skip product gallery
Similar Items
EV3 Sensor Adapter for NXT or Arduino
CHF 80.00*
With this adapter the new Lego Mindstorms EV3 sensors can be connected to the intelligent Lego Mindstorms NXT stone or the Arduino board. This adapter is a UAR converter.
For NXT, works with BricxCC and later EV3 IDE for NXT
Apply with Arduino, NXShield or I2C access point board
Lightweight and small design that fits linearly to the sensors and module
Provides UART with I2C interface
EVShield with Arduino Uno compatible board bundle
CHF 15,063.00*
This ball caster comes with two balls, one of plastic and one of metal. You can attach it to your NXT and replace the balls according to your preference.
Tip
Arduino Explore IoT Kit Rev2
CHF 170.00*
Advanced high school and college students can now create their own connected devices - known as the Internet of Things - quickly and easily. They’ll learn how to build Internet-connected objects with easy-access getting started activities and 10 sustainability projects, supported by technical and theoretical lessons. Each of these projects allows students to investigate and solve a real-world challenge linked to one of the UN’s Sustainable Development Goals. Students learn design thinking methods that help them develop their own unique solutions to challenges such as urban farming, health monitoring, and water and waste conservation. Empower your students with future technologies, design methodologies, and an in-depth understanding of real-world issues to build a sustainable future with the Arduino Explore IoT Kit Rev2.
Learning outcomes
The Arduino Explore IoT Kit Rev2 has been created to provide a comprehensive understanding of the Internet of Things, as well as to encourage students to think about solving global sustainability challenges, according to the UN’s Sustainable Development Goals. After looking into current academic and industrial standards, we have identified important concepts this kit should touch upon for students to learn how devices communicate and the tools used to facilitate communication, data management, analysis, and computational thinking by using real-world sensors to capture meaningful data from the environment and modify it by remotely controlling actuators such as LEDs, buzzers, displays, through the Cloud.
The kit includes:
Arduino MKR WiFi 1010
Arduino MKR IoT Carrier Rev2 designed for this kit, includes:
Two 24V relays
SD card holder
Five Tactile buttons
Plug and play Grove connectors for different external sensors
Temperature sensor
Humidity sensor
Pressure sensor
Gas sensor (VOC)
Ambient light sensor
RGB color sensor
Gesture sensor
Accelerometer
RGB 1.20” rounded display
18650 Li-Ion rechargeable battery holder
Five RGB LEDs
Buzzer
Micro USB cable
Moisture sensor
PIR sensor
Plug-and-play cables for the external sensors
Plastic enclosure to attach and protect the hardware
Access to the demo version of Arduino Cloud for Education, which includes a complete IoT getting started experience and three introductory activities and lessons.
For a more comprehensive educational journey into the Internet of Things, access to 10 more step-by-step, hands-on projects, each linked to the UN’s Sustainable Development Goals and covering the fundamentals of IoT, and to connect with Google Classroom, educators can subscribe to the Arduino Cloud for Education School Plan.
Each of the 10 projects takes between 15-25 hours to complete, and can be completed over the course of a couple of weeks or a whole term or year.
Each project contains five modules which can be completed in an order that makes sense for your classroom.
To complete a project, students ideally need good programming skills and to have worked with sensor technologies.
However, if your students are at more of a basic level, the kit also includes additional technical activities and lessons for beginners.
