CR123A Li-ion Battery Holder for micro: Maqueen

CHF 10.35*

Content: 1 Stück

Available. If the available stock is exceeded, no additional units of this item can be added to the cart. If you have any questions, please contact the service hotline at the bottom of this page.

Product number: DFR-FIT0611

Product information "CR123A Li-ion Battery Holder for micro: Maqueen"

This is a Li-ion Battery Holder specially designed for micro: bit educational robot Maqueen. It can be used to hold a CR123A 3.6V lithium rechargeable battery to provide more than 8 hours continuous power for Maqueen. Using this environment-friendly product, you can save about 200 batteries in one year.
This Li-ion Battery Holder integrates charging circuit and MicroUSB interface, freeing users from purchasing extra charger. Meanwhile, we set over-current and reverse connection protection for it to improve the safety in using Li-ion Battery.

SPECIFICATION

Charging Voltage: 4.5-5.5V DC
Charging Interface: USB
Output Voltage: 3.5~4.2V DC
Reverse Connection Protection
Over Current Protection
Charging Current: 350mA
Dimension: 56×32mm/2.20”×1.26”

SHIPPING LIST

CR123A Li-ion Battery Holder(V1.0) x1
Screw x4
Copper Column x4
Connecting wire x1
Double-side Adhesive Tape x1

Bildungsstufe:	Diploma/ Vocational/ Uni, Middle years, upper primary
DataLogger Schnittstellen:	BBC Micro:Bit
Fach:	Robotics/ Microcontrollers, informatics, informatics
Schnittstelle:	BlueTooth, USB
language:	English

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessory Items

Maqueen micro:bit Educational Programming Robot Platform

Hello, my name is Maqueen, is a graphical programming robot for STEM education, which inherits playability and simple operation of micro:bit. The Mini-body, interesting features and plug-and-play allow children to quickly learn graphic programming in entertaining, nurturing children's interest in science and logical thinking. Maqueen is accessible to Mind+ Programming platform now. Mind+ is a Scratch3.0-based graphical programming platform from DFRobot, supporting python, Arduino and other programming platforms. At present, Mind+ has been applied to all kinds of sensors, modules and related educational products.

CHF 60.00*

Details

NC NL166 Industriezelle Akku, Li-Ion, 16340, 3,7 V, 650 mAh

NC NL166 Li-Ion Akku mit Schutzschaltung (PCB/IC-Protection) gegen Kurzschluss, Überladung und Tiefentladung z.B. für Hochleistungs-LED-Taschenlampen. Features: hochwertige Markenzelle von Sanyo mit langer Lebensdauer und hoher Zyklenfestigkeit mit Schutzschaltung (PCB / IC-Protection) gegen Kurzschluss, Uberladung und Tiefentladung Technische Daten: Spannung: 3,7 V Kapazität: 650 mAh Zellengröße: 2/3 A, 16340 Technologie: Li-Ion Schutzart: Schutzschaltung (PCB/IC-Protection) Masse: H x Ø: 34,8 x 16 mm Gewicht: 30 g Kompatibel zu: RCR123A

CHF 1,247.00*

CR123A - Photo Battery Lithium Manganese Dioxide 3 V 1.6 Ah,

Country of origin China (CN) Manufacturer No Brand Gross weight (incl. package) 19.0 Gram Dimensions (incl. package) 90 x 66 x 20 MM

CHF 9.25*

Details

Similar Items

4 x AA Battery Holder with On/Off Switch

Make a nice portable power pack with this 4 x AA battery holder. It fits any alkaline or rechargeable AA batteries in series. There's a snap on cover and an on/off switch which can be handy when wiring to something without a switch. New! We now have 0.1" headers on ends of these cables so you can plug them into a breadboard or headers with ease! Of course, you can still always solder to them or cut the ends off. The four batteries are held in series, for a nominal output of 6V DC for alkaline (6.4V when fresh, 4V when dead), and 4.8V DC for rechargeables (5.2V when fully charged, 4.4V when discharged). Using rechargeables will make this work nicely with nearly any 5V project, with alkalines you may want to put a 1N4001 in series to drop the voltage from 6V down to 5.3V.

CHF 514.00*

Details

6-AA Battery Holder with EV3 Mount

This battery holder is designed to hold 6 AA batteries. It has LEGO NXT/EV3 compatible mounting to integrate it into your LEGO contraption easily.

CHF 95.00*

Coin Cell Battery Holder

This is a simple coin cell battery holder that can enclose two CR2032 batteries inside itself, and safely kept closed via two phillips head screws. Each battery holder will run batteries in series, output up to 6V, and is equipped with an On/Off slide switch and two 6" power wires (one positive and one negative) on the back.

CHF 395.00*

mBot™ 3.7 V LiPo Battery

Simplify your mBot maintenance by using this rechargeable 3.7 V, lithium-polymer battery (1800 mAh) in place of AA batteries to power mBot™. The battery charges when mBot is connected via USB to a computer or power supply.

CHF 1,662.00*

JST Jumper Wire and Socket

This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST connector on one end, bare cable on the opposite end and it also comes with the mating connector for the JST. Features: 2-pin JST connector on one end, bare cable on the opposite end. Comes with the mating connector for the JST that you can mount on a PCB. Can be used for devising more powering options for the microbit. Contents: 1 x JST Jumper Wire and Socket Dimensions: Length: 15cm.

CHF 177.00*

micro:Maqueen Plus V2 (18650 Batterie)

Maqueen Plus V2 is the latest version of the STEAM educational robot Maqueen Plus. Optimized with more expansion ports, larger capacity power supply, and larger body, it is fully compatible with more peripheral components like HuskyLens AI camera, Maqueen Mechanic Kits, which makes it an accessible STEAM robot teaching tool for primary and secondary students. Maqueen Plus V2 is not only suitable for classroom teaching, but also can be used for after-school extended exercises and robot competitions. Besides all the functions of Maqueen Lite, it offers richer and more flexible functions and stronger performance. Whether you have ever used Maqueen Series products or not, you’ll find it very easy to get started. Note: micro:bit board and batteries are not included. 18650 Specifications: Standard voltage: 3.7V Rated capacity: 2500mAh Size: 18mm diameter, 65mm length FEATURES No complex assembly, get started in minutes More IO expansion ports: 3.3V IO x7, 5V IO x3, I2C x3 5 line-tracking sensors, reliable and flexible Larger body, more flexible expansion methods Two versions to choose from: AA battery and 18650 battery AA battery version supports 1.2V Ni MH battery or 1.5V alkaline battery, while 18650 battery version supports 3.7V 18650 battery Works well with HuskyLens AI camera Rich peripherals: IR receiver, LED car lights, RGB ambient lights, buzzer, ultrasonic sensor, etc. Frosted acrylic protective plate at the bottom Storage box with a deeper base to provide enough room for the assembled Maqueen Plus car

CHF 76.85*