4 x AA Battery Holder with On/Off Switch

CHF 514.00*

Prices incl. VAT plus shipping costs

No longer available. Please contact our service hotline at the bottom of this page if you have any questions.

Product number: ADA-830

Product information "4 x AA Battery Holder with On/Off Switch"

Make a nice portable power pack with this 4 x AA battery holder. It fits any alkaline or rechargeable AA batteries in series. There's a snap on cover and an on/off switch which can be handy when wiring to something without a switch.

New! We now have 0.1" headers on ends of these cables so you can plug them into a breadboard or headers with ease! Of course, you can still always solder to them or cut the ends off.

The four batteries are held in series, for a nominal output of 6V DC for alkaline (6.4V when fresh, 4V when dead), and 4.8V DC for rechargeables (5.2V when fully charged, 4.4V when discharged). Using rechargeables will make this work nicely with nearly any 5V project, with alkalines you may want to put a 1N4001 in series to drop the voltage from 6V down to 5.3V.

Fach:	Robotics/ Microcontrollers, informatics

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessory Items

JST Jumper Wire and Socket

This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST connector on one end, bare cable on the opposite end and it also comes with the mating connector for the JST. Features: 2-pin JST connector on one end, bare cable on the opposite end. Comes with the mating connector for the JST that you can mount on a PCB. Can be used for devising more powering options for the microbit. Contents: 1 x JST Jumper Wire and Socket Dimensions: Length: 15cm.

CHF 177.00*

Similar Items

6-AA Battery Holder with EV3 Mount

This battery holder is designed to hold 6 AA batteries. It has LEGO NXT/EV3 compatible mounting to integrate it into your LEGO contraption easily.

CHF 1,545.00*

CR123A Li-ion Battery Holder for micro: Maqueen

This is a Li-ion Battery Holder specially designed for micro: bit educational robot Maqueen. It can be used to hold a CR123A 3.6V lithium rechargeable battery to provide more than 8 hours continuous power for Maqueen. Using this environment-friendly product, you can save about 200 batteries in one year.This Li-ion Battery Holder integrates charging circuit and MicroUSB interface, freeing users from purchasing extra charger. Meanwhile, we set over-current and reverse connection protection for it to improve the safety in using Li-ion Battery. SPECIFICATION Charging Voltage: 4.5-5.5V DC Charging Interface: USB Output Voltage: 3.5~4.2V DC Reverse Connection Protection Over Current Protection Charging Current: 350mA Dimension: 56×32mm/2.20”×1.26” SHIPPING LIST CR123A Li-ion Battery Holder(V1.0) x1 Screw x4 Copper Column x4 Connecting wire x1 Double-side Adhesive Tape x1

CHF 10.35*

Wasserdichter 3x AA-Batteriehalter mit Ein/Aus-Schalter

Keep your power source safe and toasty in these waterproof 3xAA battery holders. They're just like classic switched battery holders, but designed for survival! The case has a rubber gasket around the edge of the case (its black and hard to see in the photos but it is there) and attaches together with 4 machine screws. What we like about this design is that the hexnuts are captive in one side and you can assemble/disassemble as many times as you need. There's a potted power switch and a rubber-boot on-off switch (press to turn on/off). Use with any alkaline or rechargeable batteries for about 4.5V output.

CHF 779.00*

Details

4AA Battery Holder with NXT Mount

This battery holder is designed for 4AA batteries (for use with NXTServo and MTRMX-Nx). It has NXT compatible mounting holes to integrate it into your NXT contraption easily.

CHF 1,525.00*

6-AA Battery Holder with EV3 Mount

This battery holder is designed to hold 6 AA batteries. It has LEGO NXT/EV3 compatible mounting to integrate it into your LEGO contraption easily.

CHF 95.00*

JST Jumper Wire and Socket

CHF 177.00*