BBC micro:bit Erfinder Kit

CHF 48.18*

Inhalt: 1 Stück

Preise inkl. MwSt. zzgl. Versandkosten

Versandfertig in 1 Tag, Lieferzeit 10 days

Sprache

Englisch

Französisch

Produktnummer: PMR-INV-FR

Produktinformationen "BBC micro:bit Erfinder Kit"

V1_V2

Holen Sie sich mehr von BBC micro:bit mit dem Kitronik's unglaublichen Erfinder Kit! Ein einfacher Weg, um das Erstellen von Schaltungen und Code zu lernen.

Bitte beachten Sie: BBC micro:bit ist nicht enthalten.

Das Kitronik Erfinder Kit ist ein guter Einstieg in das Programmieren mit dem BBC micro:bit und deren Interaktions-Hardware. Mithilfe von LEDs, Motoren, LDRs und Kondensatoren können Sie 10 faszinierende Experimente durchführen.

Das einfach umsetzbare Tutorial Buch bietet einen soliden Start und führt Sie durch alles, was Sie über die Programmierung mit dem BBC micro:bit wissen müssen. Sie benötigen keine Programmierkenntnisse. Sie programmieren und erstellen Schaltungen in kürzester Zeit mithilfe des Tutorial Buches.

Das Kitronik Erfinder Kit für den BBC micro:bit bietet eine fantastische Art zu lernen, wie man elektronische Schaltungen konstruiert und steuert. Das BBC micro:bit hat mehrere zugängliche Pins (externe Anschlüsse), welche auf dem Anschlussrand der micro:bit Platine vorhanden sind. Durch die Verwendung der speziell entwickelten Randstecker-Platine und der verbundenen Steckplatine ist es einfach, zusätzliche Komponenten am BBC micro:bit anzuschliessen.

Eigenschaften:

Lötfreies Arbeiten - bauen Sie Ihre erste Schaltung in wenigen Minuten!
Machen Sie 10 Experimente mit dem mitgelieferten Schritt-für-Schritt Tutorial Buch.
Alle Teile sind enthalten, um die 10 Experimente durchzuführen (siehe unten).
21 zugängliche Pins (externe Anschlüsse) sind auf dem Anschlussrand der micro:bit Platine vorhanden.
Kleine Steckplatine zum schnellen Prototyping enthalten.

Benötigt wird:

1 x BBC micro:bit
1 x Kreuzschlitzschraubendreher
1 x Klemmenschraubendreher
1 x Mikro USB-Kabel

Bildungsstufe:	Zyklus 2, Zyklus 3
Fach:	Informatik, Medien und Informatik (LP21), Robotik/Mikrokontroller
Sprache:	English

0 von 0 Bewertungen

Bewerten Sie dieses Produkt!

Teilen Sie Ihre Erfahrungen mit anderen Kunden.

Anmelden

Ihre E-Mail-Adresse

Ihr Passwort

Bewertungen nur in der aktuellen Sprache anzeigen.

Keine Bewertungen gefunden. Teilen Sie Ihre Erfahrungen mit anderen.

Accessory Items

Klimate Board for the BBC micro:bit

Add real-time clock and environment sensing (pressure, temperature, & humidity) capabilities to the micro:bit with the Kitronik RTC Board. MakeCode compatible.

CHF 28.05*

ZIP Halo HD for micro:bit

The Kitronik Halo HD board for the BBC micro:bit incorporates 60 individually addressable full colour ZIP LEDs. It also breaks out P1 and P2 to a standard 0.1” footprint, it features a MEMS microphone for detection of sound, and a piezo buzzer to play sound. If that weren't enough, it also features an onboard real time clock (RTC) controlled by I2C lines from the microbit. The board also has two M3 mounting holes. We think you'll agree, the board is loaded with useful features. It doesn't stop there... Plug n Play: No tools required, not even a screwdriver, plug the micro:bit straight into the onboard edge connector and you are good to go! Onboard Power: The board has a 3xAA battery holder mounted on the rear, with a power switch on the front of the board. A regulated supply is produced on the board which is fed into the 3V and GND connections to power the connected BBC micro:bit, removing the need to power the BBC micro:bit separately. See the Datasheet for more information. MakeCode Blocks: Kitronik have created custom blocks for the Halo HD for use with MakeCode. To add these blocks, first go to makecode.microbit.org and start a new project. Under the “Advanced” section click on “Extensions”. In the next window search for “Halo HD”. Then, click on the tile to import it into MakeCode. You will see that the blocks are split across three categories; ZIP LEDs, Microphone and Clock. You can find more information on the MakeCode editor and also on how to write code for it with MicroPython in the Datasheet. Examples: To get you off to a flying start we have produced a number of code examples that cover all of the onboard features and that will also serve to inspire your own projects. You will find links to these examples in the resources section below. Features: The board features 60 individually addressable full colour ZIP LEDs. It breaks out P1 and P2 to a standard 0.1” footprint. It's wired for sound with a MEMS microphone and a piezo buzzer. It has an onboard Real time clock (RTC) controlled by I2C lines. Plug n play with the onboard edge connector, no tools required!. The board has a 3xAA battery holder mounted on the rear. The On/off switch helps you maximise battery life. It can be coded with MakeCode blocks via our custom blocks or with MicroPython. 2 x M3 Mounting holes, for secure projects. Contents: 1 x :VIEW ZIP Halo HD Board for micro:bit. Dimensions: Diameter: 87mm. M3 Mounting Holes Spacing (Center to Center): 68.4mm.

CHF 30.00*

micro: Circular RGB LED Expansion Board

This board can be a cool clock, a timer, a Lucky Turntable Game, a wearable ornament, and an interactive colored pendant. With a micro:bit main board, this 24 RGB LEDs circular expansion board changes to an exquisite creator's piece. You can turn it into a tomato timer via the onboard buzzer, and turn it into a colorful music spectrometer through the onboard microphone; There are two external ports P0, P1 in reserve, so you can get more ways to play by connecting a large number of boson and gravity sensors. With different paper-cuts and acrylics, you can put on a variety of new clothes for the expansion board. For example, put on red Chinese knot for it in Chinese New Year, put on the cartoon face for it at Children's Day, put on the snow or Christmas tree for it at Christmas. FEATURES Support USB interface power supply and direct use of power-bank power supply or USB computer power supply. Support PH2.0 interface power supply and the battery box or lithium battery power supply are both OK. 24 RGB single-line lights, 16 million colors free mixing Makecode graphical programming Onboard microphone and buzzer Leaded out P0 and P1 interfaces, and distribute with the connection line, support the boson expansion modules. Ultra-thin volume,more suitable for wearable and strap applications.

CHF 15.58*

micro: IoT - micro:bit IoT Expansion Board

With the development of IoT, there are so many mature IoT platforms emerging in both domestic and overseas market, but most of them are mainly designed for the professional, which could be very hard for the non-experts to get started. Therefore, we specifically developed this micro: IoT, a micro:bit-based IoT expansion board. Use the board together with DFRobot Easy IoT platform, lower the barrier of using IoT. This micro: IoT board is pretty cute and delicate, on which we integrated Wi-Fi, OLED, 2-way motor drive, 6-way IO port, 2-way IIC, 1-way serial port, 1-way buzzer, 3-way RGB, 2-way servo, Li-ion battery holder, charging circuit, emergency power interface, etc. So many resources for you to program! Even without complicated background knowledge, you can build your IoT applications in few steps! We designed the board as a cloud shape to make it more suitable for the theme of IoT. As for power supply, we selected CR123A 3.6V lithium rechargeable battery. This kind of battery features small size, high capacity, and high safety. What’s more, we add short circuit and reverse connection protection for the product to further improve the safety in using Li-ion Battery. It's an easy-to-use and efficient IoT teaching tool, using this product, you can learn lessons related to IoT, such as:

CHF 60.25*

Edge Connector Breakout Board for BBC micro:bit

This pre-built Edge Connector Breakout Board for the BBC micro:bit gives access to all the important pins on the bottom edge of the BBC micro:bit. Looking to do more with your BBC micro:bit? Unlock its potential with this pre-built version of our Edge Connector Breakout Board! This breakout board has been designed to offer an easy way to connect additional circuits and hardware to the pins on the edge of the BBC micro:bit. It provides access to all of the BBC micro:bit processor pins allowing a lot of extra functionality to be added. The datasheet (below) includes a helpful diagram explaining the function of every pin on the BBC micro:bit. This Edge Connector Breakout Board for the BBC micro:bit gives access to all of the important pins on the bottom edge of the BBC micro:bit. 21 pins are broken out in total; providing additional I/O lines, direct access to buttons A and B, the LED matrix outputs and the I2C bus. Please refer to the datasheet below for more details. The BBC micro:bit pins are broken out to a row of pin headers. These provide an easy way of connecting circuits using jumper wires. The SCL and SDA pins are separated at the edge of the board (solder pads) providing easy identification. The PCB includes a prototyping area with 3V, 0V and unconnected rows that can be soldered to. This allows the easy connection of switches, sensors and any pull-up or pull-down resistors etc. as required. To use the breakout board the BBC micro:bit should be inserted firmly into the connector as shown below:

CHF 8.21*

PlayGround for BBC Micro:Bit - Starter Kit

Dies ist eine aufregende neue Möglichkeit, Ihren micro:bit mit Zusatzkomponenten zu verwenden, ohne dass Krokodilklemmen erforderlich sind, die für kleine Menschen schwer zu bedienen sind. Ausserdem ermöglicht dieser neue Ansatz die Verwendung eines einzigen Kabels für die meisten Add-ons, anstelle von 3 Krokodilklemmen Detaillierte Informationen zur Verwendung und Programmierung finden Sie im 4T-Blog Dieses Starter Kit enthält: Playground für Micro:Bit (Micro:Bit ist optionales Zubehör) 4 x Verbindungskabel Ampel Gizmo Zifferblatt Gizmo Buzzer Gizmo 2 x Flamme Gizmos Prototyping Gizmo Merkmale: Halterungen für Ihren BBC micro:bit (micro:bit nicht im Lieferumfang enthalten, sofern nicht ausgewählt) Batteriehalterung für 2xAA-Batterien fest eingebaut (Batterien nicht enthalten) Stabiler Ein/Aus-Schalter Blaue Betriebsanzeige-LED Weisse LEDs an allen 3 Eingängen zeigen an, wenn sie aktiv sind Alle Micro:Bit Ein-/Ausgänge sind auf Krokodilklemmen-kompatible Stecker gebracht, so dass Sie vorhandene Komponenten weiter verwenden können Jeder neue Anschluss umfasst das Signal sowie die Stromversorgung und die Masse Schnell und einfach zu verbinden.

CHF 46.75*

Kitty Case for micro:bit

Increase your micro:bit cuteness factor to over NINE THOUSAND with these soft rubber cases. They'll protect your micro:bit but still give you access to all of the ports, buttons, and lights. The Kitty Case is made from hard-wearing, soft, flexible rubber, making it a cinch to fit or remove it. The white piece lets you see the labels on the edge connector and access the pads with crocodile clips, or you can remove it altogether if you need to use the whole edge connector. You can access the three buttons, micro-USB, and JST connectors through cutouts in the case, and the rubber over the LED matrix diffuses the lights beautifully.

Ab CHF 8.00*

Details

Low voltage relay for micro:bit (solid state)

The MonkMakes Relay for the BBC microbit is a solid-state (no moving parts) relay that allows an output of a micro:bit to turn things on and off. A micro:bit can turn an LED on and off directly, but anything more powerful requires something like a relay or a transistor. Using a transistor to switch something on and off requires a shared ground connection with the micro:bit and a knowledge of electronics that you or your students may not be ready for. The MonkMakes Relay for micro:bit is much easier to use, acting like a simple micro:bit controlled switch. This relay can be used to switch low voltage devices such as light bulbs, a motor, a small heating element or even a string of 12V LED lighting. The voltage needs to be kept under 16V, but the relay will automatically protect itself against too much current. Features: Solid-state relay (No moving parts). Resettable polyfuse to protect against over-current. 2A Maximum current. 16V Maximum voltage. Integrated active LED power indicator. Contents: 1 x MonkMakes Relay Board for the BBC micro:bit. Dimensions: Length: 59.3mm. Width: 49mm. Height: 1.6mm. Requires: BBC micro:bit. Crocodile Leads.

CHF 18.70*

MI:power board for the BBC micro:bit V1

The MI:power board for the BBC micro:bit brings real portability to your wearable projects. The stylish, lightweight PCB is designed to fit snugly against the BBC micro:bit and features a built in buzzer and 3V coin cell holder. When assembled, the MI:power board is connected directly to the 3V, GND and P0 connections on the micro:bit. The 3V and GND connections provide power to the micro:bit and the built in buzzer is connected to P0, which is the default output pin when using the audio functions in the Block Editor software. The board has an easy to access on/off switch, which makes it easy to turn a project on and off, rather than have to disconnect the power supply from the BBC micro:bit. Once the unit is assembled and attached to the BBC micro:bit the mechanical fixings prevent the battery from being removed unless you use a screwdriver, so whatever the use, the battery will remain safely in place. Spacers, fixings and a battery are all provided. Please Note: BBC micro:bit is NOT included. Features: Power your BBC micro:bit from a stylish PCB. On-Board buzzer. Easy access on/off switch.

CHF 6.75*

ZIP Halo for the BBC micro:bit

Add some colour to your next coding project with our new Halo board for the BBC micro:bit. The Halo has 24 ZIP LEDs, which are individually addressable full colour LEDs. This means that each LED can display a huge spectrum of colours, allowing amazing colourful effects to be achieved. The Halo bolts directly onto the BBC micro:bit using five bolts which are secure and robust. The board also has extension connector pads (0.1 pitch) allowing more ZIP LEDs to be connected. The P1 and P2 micro:bit pins are also broken out to 0.1" pads along with power and GND. This allows for additional connections to low power components such as sensors and switches. The Halo takes a supply voltage of 3.5V-5V and provides a regulated power supply to BBC micro:bit. Power can be connected using the JST input using a 3xAAA battery holder, or LiPo battery, or JST lead. Alternatively you can solder a power supply directly to the solder pads on the PCB. The LEDs used are based on the WS2812B part which is compatible with any WS2812B driver code. They can also be coded in the MakeCode Block/Javascript editor. Features: Halo has 24 individually addressable ZIP LEDs. Compatible with Adafruit NeoPixel and other WS2812B driver code. Supply voltage: 3.5V to 5V. Halo bolts directly onto the BBC micro:bit. The board also has extension connector pads. Contents: 1 x Halo for the BBC micro:bit. 5 x Counter Sunk M3 x6mm Screws. Dimensions: Diameter: 80mm. Height: 3.2mm Height With micro:bit: 10mm. PCB Thickness: 1.5mm.

CHF 15.58*

Environment Science Board for micro:bit

Environment Science Board for micro: bit is designed with highly symbolic trees, houses, and snowy mountains. On a wide and easy-to-use PCB, it integrates many sensor modules of nature and science. Including UV sensor, temperature sensor, humidity sensor, air pressure sensor, sound sensor, color sensor, light sensor, water temperature sensor, TDS water quality sensor, buzzer, OLED display, etc. This kit is rich in knowledge, including a wide range of applications. It is initial to observe and ease to play. Extended GPIOs are set and it supports gravity series sensors. The bottom is designed with PMMA (acrylic） to enhance the ease of use and durability. It supports Makecode and Mind + platforms. Power supply: 3.5V~5V (AAA 1.5V Battery x3) GPIO: P1, P2, P8, P12, UART, I2C ML8511 UV sensor BME280 sensor TCS34725 color sensor DS18B20 waterproof temperature sensor TDS water quality sensor Capacitive soil moisture sensor WS2812-RGB-LED Dimension: 196mm×110.6mm Programming platform: Makecode and Mind+

CHF 109.00*

Crocodile Leads (set of 10)

Fünf Paar Krokodilklemmenleitungen (rot, schwarz, grün, gelb und weiss) mit Kunststoff isolierten 35mm Krokodilklemmen an jedem Ende. Länge 500mm. Drahtstärke 14/0,12 mm (22AWG). Maximaler Strom 0,5A.

Inhalt: 10 Paket(e) (CHF 0.51* / 1 Paket(e))

CHF 5.09*

Math & Automatic Touch Keyboard for micro:bit

This is a Math & Automatic expansion board for micro:bit. Easy to use, and suitable for a wide range of applications. We designed this board for two sorts of application scenarios: math game and automation control. The 16 programmable touch keys and RGB LEDs on the board offers rich function and flexible input and output. Besides, the board has 1 vibration motor, 1 buzzer, 2 motor ports, 2 servo ports and 9 expansion ports, which lays a foundation for using in automation controlling application. FEATURESMath Game: 1.Calculator 2.Quick Calculation 3.Math Reasoning Game 4.Lucky number 5.Twenty-One 6.Whack a Mole 7.The mystery of Dazzling Numbers More...... Automatic Control: 1.RGB Waterfall Light 2.Touch Music 3.Password Lock 4.Motor Control System 5.Touch Remote Wireless Handle 6. Countdown Timer 7. Natural wind Electric Fan 8. NFC Password Entrance Guard 9. 2. 4G Multiplex Communication System More......

CHF 40.50*

Moisture Sensor for micro:bit

The moisture sensor for micro:bit allows your micro:bit to detect moisture, so if your plant is thirsty you'll know about it! or how about using one and a couple of micro:bits to tell you when your bath has reached the correct level? To hook this up to your micro bit you will require alligator cables alternatively you can solder headers or a screw terminal to the board to make hooking it up to your other micro controller projects a dream.

CHF 14.49*

littleBits Micro:Bit Adaptor

The littleBits micro:bit Adapter connects micro:bit and littleBits enabling new learning experiences and creative inventions in a less-intimidating way. Enhance your learning with micro:bit by adding coding to your littleBits using platforms like the free Microsoft MakeCode or Python editor. It works by connecting the signals from the littleBits input and output bitsnaps to pins on the micro:bit edge connectors. No special coding libraries are needed. * micro:bit is required for use & sold separately

CHF 36.00*

Kitronik 16 Servo Driver Board for the BBC micro:bit

Take your robotics project to the next level with the (i2C) Kitronik 16 Servo Driver Board for the BBC micro:bit. Capable of controlling 16 servos which are powered directly from the board's power supply. The board can be powered either through the terminal blocks or the on-board header for radio control receiver packs. The pins from the BBC micro:bit are broken out to pads on the end of the Servo Driver Board, in accordance with the Link Standard for BBC micro:bit accessories. These pads can either be soldered onto directly, or they are the correct spacing for our PCB pin headers (see image below for a close up of the pads). Features: Input voltage 3V - 5.5V. Drive up to 16 servo motors. Servos take power directly from the board power supply. Standard 0.1" pitch servo connectors. Terminal blocks for easy connection of power. Includes Edge Connector for the BBC micro:bit to slot into. Link Standard compatible. Access the other BBC micro:bit pins easily and conveniently. Dimensions: Length: 67.4mm. Width: 62mm. Height: 16mm.

CHF 19.75*