Electro-Fashion Deluxe E-Textiles Pack
Produktinformationen "Electro-Fashion Deluxe E-Textiles Pack"
This deluxe E-Textiles pack is a great way to get a little more involved with E-Textiles. We have selected a number of products from our Electro-Fashion range, including three of our ultra-slim LEDs and two separate power boards. There are enough components for you get started immediately to create some eye catching E-Textiles projects, the only limit is your imagination.
Features:
- Everything you need to complete three projects
- Enough Electro-Fashion components to get started immediately with E-Textiles
- Full instructions for assembly
- Great project ideas and tutorials
Contents:
- 2 x Sewable Blue LEDs
- 2 x Sewable White LEDs
- 2 x Sewable Sakura (lilac) LEDs
- 2 x Blue Flashing LEDs
- 2 x Green Flashing LEDs
- 2 x White Flashing LEDs
- 1 x Slide Switch
- 1 x Push Switch
- 2 x CR2032 Coin Cell Batteries
- 1 x CR1220 Coin Cell Battery
- 1 x 6m Conductive Thread
- 1 x Coin Cell Holder
- 1 x Miniature Coin Cell Holder
- 1 x Switched Coin Cell Holder
Dimensions:
- Ultra Slim Sewable LED Length: 15mm
- Ultra Slim Sewable LED Width: 6.5mm
- Ultra Slim Sewable LED Height: 2.7mm
- Slide Switch Length: 18mm
- Slide Switch Width: 8.5mm
- Slide Button Switch Height: 4mm
- Push Button Switch Length: 18mm
- Push Button Switch Width: 8.5mm
- Push Button Switch Height: 3mm
- CR1220 Battery Height: 2mm
- CR1220 Battery Diameter: 12mm
- CR2032 Battery Height: 3.2mm
- CR2032 Battery Diameter: 20mm
- Sewable Coin Cell Holder Length: 34mm
- Sewable Coin Cell Holder Width: 20mm
- Sewable Coin Cell Holder Height: 4.5mm
- Sewable Miniature Coin Cell Holder Length: 22mm
- Sewable Miniature Coin Cell Holder Width: 12.5mm
- Sewable Miniature Coin Cell Holder Height: 4mm
- Switched Coin Cell Holder Length: 22mm
- Switched Coin Cell Holder Width: 12.5mm
- Switched Coin Cell Holder Height: 4mm
Requires:
- Scissors
- Needles
| Bildungsstufe: | Zyklus 1, Zyklus 2 |
|---|---|
| Fach: | Gestalten (LP21), Technisches Gestalten, e-Textiles |
Anmelden
Produktgalerie überspringen
Accessory Items
LilyPad Rainbow LED (6 Colors)
CHF 78.00*
This is the LilyPad Rainbow LED strip, with seven LilyPad LEDs that are still attached to one another, letting you snap LEDs apart at your leisure to sew into clothing or whatever else you can dream up.
The LilyPad Rainbow LED features seven individual LEDs in six unique colors (Red, Blue, Green, Yellow, Pink, and White). Text has been added to the back of each board to indicate its color. Due to popular request, we have included two white LEDs instead of just one.
Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education in e-textiles.
Nähnadel-Set
CHF 322.00*
Dieses Set von Nadeln ist ein Muss, wenn Sie Ihr nächstes E-Textil-Projekt zusammennähen. Jeder Umschlag enthält drei 48 mm, 1,23 mm dicke Nadeln und zwei kleinere 39 mm, 0,67 mm dicke Nadeln. Das Auge jeder Nadelgrösse ist gross genug, um mit unserem leitfähigen Faden problemlos eingefädelt zu werden.
Lilypad Conductive Thread Bobbin
CHF 99.00*
This is 12 meters of smooth conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable electronics without the upfront cost of buying an entire spool of thread. Close to 40 feet of thread is enough to get a simple design stitched onto your shirt, backpack or hat.
What sets this thread apart from the other conductive thread that we carry is the fact that it’s actually spun from 12UM stainless steel fiber making it incredibly smooth and without the loose hairs seen on other bobbins. This means that while it may not be easy to solder to, because it’s stainless, it also won’t burn up when you touch it with a soldering iron. Suitable for hand or machine sewing (as a bobbin thread). We’ve had no trouble using it for close, tight connections, but if you’re worried, waxing the thread should keep it manageable!
LilyPad Coin Cell Battery Holder - Switched - 20mm
CHF 405.00*
Sure, your flashing, chip-tune playing T-shirt is really cool at the party… but at some point you need to turn it off. And yes, you could just pull the battery, or maybe you’ve even sewn a LilyPad slide switch in-line. Wouldn’t it be nice if there was just a switch on the battery? Well, look no further.
This LilyPad Coin Cell Battery Holder has a small slide switch installed on the board, in-line with the power so you can shut off your project and save batteries. This slide switch is the same as on the LilyPad Slide Switch Board, so it’s not easy to accidentally turn off or on.
Just like the original Coin Cell Battery Holder, this simple board holds a 20mm coin cell battery (such as a CR2032) and gives you four connection points (two positive and two negative) for sewing into your project. Additionally, we have strengthened the battery connector on this board in order to ensure that it doesn’t accidentally pop off.
Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles.
Produktgalerie überspringen
Similar Items
LilyPad Sewable Electronics Kit
CHF 200.00*
Mit dem LilyPad Sewable Electronics Kit können Sie die wunderbare Welt des elektronischen Nähens (E-Sewing) und der E-Textilien anhand einer Reihe von Einführungsprojekten mit dem LilyPad-System entdecken. Sie werden lernen, wie man grundlegende Schaltungen näht, um LEDs zum Leuchten zu bringen, sie mit Knöpfen und Schaltern zu steuern und sogar mit einer vorprogrammierten LilyMini-Schaltung zu experimentieren, die auf das Umgebungslicht reagiert. Zusätzlich zu den LilyPad-LEDs und Batteriehaltern enthält der Bausatz zwei LilyPad ProtoSnap-Platinen, mit denen Sie die Schaltung erkunden können, bevor Sie die Teile in ein Projekt einnähen.
Die farbige Anleitung für das LilyPad Sewable Electronics Kit (im Lieferumfang enthalten) enthält Schritt-für-Schritt-Anleitungen für die Verwendung der LilyPad-Teile, um vier komplette nähbare Schaltkreisprojekte mit leitfähigem Garn zu erstellen. Leicht verständliche Diagramme und Tipps zur Fehlerbehebung machen diese Anleitung zu einem grossartigen Einstiegswerk für Bastler und Kreative.
LilyPad ist eine tragbare Technologie, die von Dr. Leah Buechley entwickelt und in Zusammenarbeit von Dr. Buechley und SparkFun entworfen wurde. Jede LilyPad-Komponente wurde kreativ konstruiert und mit grossen Nähten versehen, damit sie in die Kleidung eingenäht werden kann. Es sind verschiedene Eingangs-, Ausgangs-, Stromversorgungs- und Sensorplatinen erhältlich. Sie sind sogar waschbar!
Hinweis: Ein Teil dieses Verkaufserlöses geht an Dr. Buechley für die weitere Entwicklung und Ausbildung im Bereich E-Textilien.
Nähbare Elektronik-Projekte:
Projekt 1: Leuchtender Pin
Projekt 2: Beleuchtete Maske
Projekt 3: Leuchtender Plüsch
Project 4: Nachtleuchtender Wimpel