LilyPad Buzzer

CHF 9.25*

Sofort verfügbar, Lieferzeit: 10 days

Produktnummer: SPRK-08463

Produktinformationen "LilyPad Buzzer"

This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtrusively loud. ** Please note:** This is an inductive buzzer meaning that is will act as a short to ground if you are not actively driving it. We recommend you put both I/O pins to low (0V) when the buzzer is not used. Also, it's come to our attention that washing these buzzers will damage them. Until we've figured out a solution to this, avoid washing any portion of your project that contains one of these buzzers. LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable! Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles.

Bildungsstufe:	Zyklus 2, Zyklus 3
Fach:	Gestalten (LP21), Technisches Gestalten

0 von 0 Bewertungen

Bewerten Sie dieses Produkt!

Teilen Sie Ihre Erfahrungen mit anderen Kunden.

Anmelden

Ihre E-Mail-Adresse

Ihr Passwort

Bewertungen nur in der aktuellen Sprache anzeigen.

Keine Bewertungen gefunden. Teilen Sie Ihre Erfahrungen mit anderen.

Accessory Items

Lilypad Conductive Thread Bobbin

This is 12 meters of smooth conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable electronics without the upfront cost of buying an entire spool of thread. Close to 40 feet of thread is enough to get a simple design stitched onto your shirt, backpack or hat. What sets this thread apart from the other conductive thread that we carry is the fact that it’s actually spun from 12UM stainless steel fiber making it incredibly smooth and without the loose hairs seen on other bobbins. This means that while it may not be easy to solder to, because it’s stainless, it also won’t burn up when you touch it with a soldering iron. Suitable for hand or machine sewing (as a bobbin thread). We’ve had no trouble using it for close, tight connections, but if you’re worried, waxing the thread should keep it manageable!

CHF 9.90*

LilyPad Coin Cell Battery Holder - Switched - 20mm

Sure, your flashing, chip-tune playing T-shirt is really cool at the party… but at some point you need to turn it off. And yes, you could just pull the battery, or maybe you’ve even sewn a LilyPad slide switch in-line. Wouldn’t it be nice if there was just a switch on the battery? Well, look no further. This LilyPad Coin Cell Battery Holder has a small slide switch installed on the board, in-line with the power so you can shut off your project and save batteries. This slide switch is the same as on the LilyPad Slide Switch Board, so it’s not easy to accidentally turn off or on. Just like the original Coin Cell Battery Holder, this simple board holds a 20mm coin cell battery (such as a CR2032) and gives you four connection points (two positive and two negative) for sewing into your project. Additionally, we have strengthened the battery connector on this board in order to ensure that it doesn’t accidentally pop off. Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles.

CHF 4.05*

Lilypad USB Plus

This is the LilyPad USB Plus, a sewable electronics microcontroller board controlled by an ATmega32U4 with the Arduino bootloader. It has a built in power supply JST (and recharge circuit) and an on/off switch with the only extra piece of hardware you need to program the LilyPad USB Plus being a micro-USB cable. We’ve also added an RGB LED in the dead-center of the board along with six white LEDs to act as a sort of bar graph. The LilyPad USB Plus was designed to streamline your next sewable project by keeping things simple and giving you more room to work while eliminating the need to sew a power supply. It has fourteen sew tabs for connecting components with conductive thread. Four of these tabs are reserved for connecting power and ground of LilyPad sensors and accessory boards, and ten are input/output (I/O). For reference, each sew tab has a nearby label with its name and the pin number it is connected to on the ATmega32U4 chip at its center. LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available in the LilyPad line but will also work with most other wearable e-textile lines. They’re even washable! Please be aware that the Lilypad USB Plus is NOT supported on Windows 7/8 due to a lack of support drivers for those specific OS’s. Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education in e-textiles.

CHF 54.02* CHF 60.22* (10.3% gespart)

LilyPad Sewable Electronics Kit

Mit dem LilyPad Sewable Electronics Kit können Sie die wunderbare Welt des elektronischen Nähens (E-Sewing) und der E-Textilien anhand einer Reihe von Einführungsprojekten mit dem LilyPad-System entdecken. Sie werden lernen, wie man grundlegende Schaltungen näht, um LEDs zum Leuchten zu bringen, sie mit Knöpfen und Schaltern zu steuern und sogar mit einer vorprogrammierten LilyMini-Schaltung zu experimentieren, die auf das Umgebungslicht reagiert. Zusätzlich zu den LilyPad-LEDs und Batteriehaltern enthält der Bausatz zwei LilyPad ProtoSnap-Platinen, mit denen Sie die Schaltung erkunden können, bevor Sie die Teile in ein Projekt einnähen. Die farbige Anleitung für das LilyPad Sewable Electronics Kit (im Lieferumfang enthalten) enthält Schritt-für-Schritt-Anleitungen für die Verwendung der LilyPad-Teile, um vier komplette nähbare Schaltkreisprojekte mit leitfähigem Garn zu erstellen. Leicht verständliche Diagramme und Tipps zur Fehlerbehebung machen diese Anleitung zu einem grossartigen Einstiegswerk für Bastler und Kreative. LilyPad ist eine tragbare Technologie, die von Dr. Leah Buechley entwickelt und in Zusammenarbeit von Dr. Buechley und SparkFun entworfen wurde. Jede LilyPad-Komponente wurde kreativ konstruiert und mit grossen Nähten versehen, damit sie in die Kleidung eingenäht werden kann. Es sind verschiedene Eingangs-, Ausgangs-, Stromversorgungs- und Sensorplatinen erhältlich. Sie sind sogar waschbar! Hinweis: Ein Teil dieses Verkaufserlöses geht an Dr. Buechley für die weitere Entwicklung und Ausbildung im Bereich E-Textilien. Nähbare Elektronik-Projekte: Projekt 1: Leuchtender Pin Projekt 2: Beleuchtete Maske Projekt 3: Leuchtender Plüsch Project 4: Nachtleuchtender Wimpel

CHF 200.00*

LilyPad Rainbow LED (6 Colors)

This is the LilyPad Rainbow LED strip, with seven LilyPad LEDs that are still attached to one another, letting you snap LEDs apart at your leisure to sew into clothing or whatever else you can dream up. The LilyPad Rainbow LED features seven individual LEDs in six unique colors (Red, Blue, Green, Yellow, Pink, and White). Text has been added to the back of each board to indicate its color. Due to popular request, we have included two white LEDs instead of just one. Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education in e-textiles.

CHF 7.80*

LilyPad Temperature Sensor

Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output 0.5V at 0 degrees C, 0.75V at 25 C, and 10mV per degree C. Doing an analog to digital conversion on the signal line will allow you to establish the local ambient temperature. Detect physical touch based on body heat and ambient conditions with this small sensor. LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable! Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles.

CHF 9.87*

Nähnadel-Set

Dieses Set von Nadeln ist ein Muss, wenn Sie Ihr nächstes E-Textil-Projekt zusammennähen. Jeder Umschlag enthält drei 48 mm, 1,23 mm dicke Nadeln und zwei kleinere 39 mm, 0,67 mm dicke Nadeln. Das Auge jeder Nadelgrösse ist gross genug, um mit unserem leitfähigen Faden problemlos eingefädelt zu werden.

CHF 3.22*

LilyPad ProtoSnap Plus

The LilyPad ProtoSnap Plus is a sewable electronics prototyping board that you can use to explore circuits and programming, then break apart to make an interactive fabric or wearable project. Programming the ProtoSnap Plus is easy with the free Arduino software you’ll need to program the ATmega32U4 on LilyPad USB Plus at the heart of the board. Once you’ve installed the software, you’ll be able to write and upload your own programs to the board, making it do almost anything you want. At the center of the ProtoSnap Plus is the LilyPad USB Plus microcontroller, pre-wired to a LilyPad board including a LilyPad Light Sensor, LilyPad Buzzer, LilyPad Button Board, four pairs of colored LilyPad LEDs and a LilyPad Slide Switch. Because these components are connected together on the ProtoSnap board, you can test out your project ideas before you sew. The ProtoSnap Plus also includes expansion ports that let you sew your wearables together or use alligator cables to easily connect external sensors and components. After testing out your coding ideas using the attached LilyPad pieces, you can break apart the prototyping board and sew them into your project! Please be aware that the Lilypad ProtoSnap Plus is NOT supported on Windows 7/8 due to a lack of support drivers for those specific OS’s. Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education in e-textiles.

CHF 101.81*