LilyPad LED White (5pcs)

CHF 6.25*

Inhalt: 5 Paket(e) (CHF 1.25* / 1 Paket(e))

Sofort verfügbar, Lieferzeit: 1-3 days

Produktnummer: SPRK-13902

Produktinformationen "LilyPad LED White (5pcs)"

This is a simple pack of five White LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up. LilyPad is a wearable e-textile technology developed by Dr. Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad piece was creatively designed with large sew tabs to allow them to be sewn into fabric. Various input, output, power and sensor boards are available. They're even washable (with special care)! Note: A portion of this sale is given back to Dr. Buechley for continued development and education in e-textiles.

Bildungsstufe:	Tertiäre Bildung, Zyklus 2, Zyklus 3
Fach:	Technisches Gestalten, e-Textiles

0 von 0 Bewertungen

Bewerten Sie dieses Produkt!

Teilen Sie Ihre Erfahrungen mit anderen Kunden.

Anmelden

Ihre E-Mail-Adresse

Ihr Passwort

Bewertungen nur in der aktuellen Sprache anzeigen.

Keine Bewertungen gefunden. Teilen Sie Ihre Erfahrungen mit anderen.

Accessory Items

Electro-Fashion conductive thread, 50 yards/ 45m

This is Kitronik's very own Electro-Fashion® branded Conductive Thread and we think it is among the best conductive thread available. It is perfect for hand sewing and can also be used on the bottom bobbin of a sewing machine (this will require the thread to be wound on to the smaller bottom bobbin first). Conductive thread can be used like conventional sewing yarn, however it electrically conducts allowing electronics to be integrated into textiles. This makes it ideal for use in a range of e-textile applications. The thread is nano plated with silver to make it conductive. The conductive thread has a generally low resistance but it does vary. We have measured between 40 and 160 ohms per meter, depending on the tension the thread is under. Once sewn the resistance is typically in the middle of this range. Over time the silver plating will degrade particularly if washed and we have measured in excess of 280 ohms on some of our older examples. Resistance does not vary significantly from one length of thread to the next, so you should be able to use this thread without concern for "dead" sections. The conductive thread has a breaking strain of around 9.3 pounds (4.2 kilos). It comprises roughly 96 individual filaments, each coated with a micron-thick layer of natural silver. This plating of the yarn is done in Europe to ensure as high a quality finish as possible. In construction, 16 of these filaments are wound together to form an initial twist; two of these twists are then twisted together, and finally three of these twists are combined to form the finished thread. The conductive thread is approximately 18 denier. It is heavier than a regular sewing thread, but not as heavy as an upholstery thread. It can be sewn on most domestic sewing machines using either a regular needle or the next size up. This thread does not fray. Features: No (or very low) fray. Conductivity = approximately 40Ω per metre (12.2Ω per foot). Count = 875 dTex. Strength 3000 cN. Elongation at break = 37%. Twist = 240Z-380S. Contents: 1 x Reel Electro-Fashion®, Conductive Thread, 50 yards / 45m.

CHF 13.50*

LilyPad Coin Cell Battery Holder - Switched - 20mm

Sure, your flashing, chip-tune playing T-shirt is really cool at the party… but at some point you need to turn it off. And yes, you could just pull the battery, or maybe you’ve even sewn a LilyPad slide switch in-line. Wouldn’t it be nice if there was just a switch on the battery? Well, look no further. This LilyPad Coin Cell Battery Holder has a small slide switch installed on the board, in-line with the power so you can shut off your project and save batteries. This slide switch is the same as on the LilyPad Slide Switch Board, so it’s not easy to accidentally turn off or on. Just like the original Coin Cell Battery Holder, this simple board holds a 20mm coin cell battery (such as a CR2032) and gives you four connection points (two positive and two negative) for sewing into your project. Additionally, we have strengthened the battery connector on this board in order to ensure that it doesn’t accidentally pop off. Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles.

CHF 4.05*

Conductive Thread - 60g (Stainless Steel)

This is about 330 meters of conductive thread spun from stainless steel fiber and wound on a spool. You can use it as a creative way to connect various electronics onto clothing projects. This large spool is a great way to get into wearable electronics without a large upfront cost and a large enough quantity to not be afraid of making a few mistakes. What sets this thread apart from the other conductive thread that we carry is the fact that it's actually spun from stainless steel fibers (as opposed to plated silver) and doesn't have a Nylon core. This means that while it may not be easy to solder to, because it's stainless, it also won't burn up when you touch it with a soldering iron. Also, it's somewhat 'hairy' and can be slightly more difficult to work with in close, fine conditions than the other thread. Our resident E-Textiles expert suggests waxing the thread for hand sewing, as this should take care of any 'hairy thread' issues. Since waxing is impractical in machine sewing applications, avoid sewing close connections by machine as the 'hairs' could potentially short across small distances.

Inhalt: 330 Laufende(r) Meter (CHF 0.25* / 1 Laufende(r) Meter)

CHF 81.03*

Lilypad Conductive Thread Bobbin

This is 12 meters of smooth conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable electronics without the upfront cost of buying an entire spool of thread. Close to 40 feet of thread is enough to get a simple design stitched onto your shirt, backpack or hat. What sets this thread apart from the other conductive thread that we carry is the fact that it’s actually spun from 12UM stainless steel fiber making it incredibly smooth and without the loose hairs seen on other bobbins. This means that while it may not be easy to solder to, because it’s stainless, it also won’t burn up when you touch it with a soldering iron. Suitable for hand or machine sewing (as a bobbin thread). We’ve had no trouble using it for close, tight connections, but if you’re worried, waxing the thread should keep it manageable!

CHF 9.90*

Nähnadel-Set

Dieses Set von Nadeln ist ein Muss, wenn Sie Ihr nächstes E-Textil-Projekt zusammennähen. Jeder Umschlag enthält drei 48 mm, 1,23 mm dicke Nadeln und zwei kleinere 39 mm, 0,67 mm dicke Nadeln. Das Auge jeder Nadelgrösse ist gross genug, um mit unserem leitfähigen Faden problemlos eingefädelt zu werden.

CHF 3.22*

Similar Items

LilyPad LED Yellow (5pcs)

This is a simple pack of five Yellow LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up. LilyPad is a wearable e-textile technology developed by Dr. Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad piece was creatively designed with large sew tabs to allow them to be sewn into fabric. Various input, output, power and sensor boards are available. They're even washable (with special care)! Note: A portion of this sale is given back to Dr. Buechley for continued development and education in e-textiles.

CHF 6.18*

LilyPad LED Green (5pcs)

This is a simple pack of five Green LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up. LilyPad is a wearable e-textile technology developed by Dr. Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad piece was creatively designed with large sew tabs to allow them to be sewn into fabric. Various input, output, power and sensor boards are available. They're even washable (with special care)! Note: A portion of this sale is given back to Dr. Buechley for continued development and education in e-textiles.

CHF 6.70*

LilyPad LED Red (5pcs)

This is a simple pack of five Red LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up. LilyPad is a wearable e-textile technology developed by Dr. Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad piece was creatively designed with large sew tabs to allow them to be sewn into fabric. Various input, output, power and sensor boards are available. They're even washable (with special care)! Note: A portion of this sale is given back to Dr. Buechley for continued development and education in e-textiles.

CHF 6.18*

Electroluminescent (EL) Wire

EL-Draht, auch als Elektrolumineszenzdraht bekannt, ist ein steifer Drahtkern, der mit Phosphor beschichtet und dann mit einer schützenden PVC-Ummantelung bedeckt ist. Wenn ein AC-Signal daran angelegt wird, leuchtet es auf. Das Kabel ist in unterschiedlichen Farben erhältlich. Es sieht ein bisschen aus wie dünnes Neon. Sehr biegsam, es behält seine Form und Sie können es um Ihren Finger wickeln. Es ist eine einfache Möglichkeit, einem Projekt etwas Glanz zu verleihen, nicht so hell wie LEDs, verbraucht aber viel weniger Strom! Wir haben einen 2,6 mm dicken EL-Draht mit einer hellgrünen Beschichtung, vorgeschnitten und an einen Standard-Schnellanschluss-EL-Draht gelötet. Früher haben wir Wanyu EL-Kabel auf Lager, aber leider haben sie die Türen geschlossen, sodass wir das EL-Kabel mit hoher Helligkeit nicht mehr haben. Das heißt, diese Marke scheint von guter Qualität zu sein und in der Helligkeit nahe zu sein! Wird oft für Kostüme, Dekoration, Akzentbeleuchtung, Sicherheitswesten, Fahrrad-/Motorrad-/Auto-/Boots-/Heimdekoration, Schilder usw. verwendet! Dieses Kabel ist nicht explizit für den Einsatz im Freien konzipiert, daher verblasst es, wenn es ständig UV-Strahlung ausgesetzt wird. Zur Verwendung muss das Kabel an einen Wechselrichter angeschlossen werden, der eine Wechselstromversorgung von etwa 100 V bei 2000 Hz liefert. Ein Wechselrichter ist nicht im Lieferumfang enthalten! Dieses Kabel ist 250 cm lang, was das Maximum ist, das von unserem handlichen tragbaren 2xAA-Taschenwechselrichter betrieben werden kann. Die volle Länge zieht 200mA aus den 2xAA-Batterien (so dass 2000mAh-Batterien ~10 Stunden halten, wenn sie im "Konstant"-Modus sind). Wir haben EL-Draht verwendet, um unsere fantastische TRON-Tasche herzustellen, also schau sie dir für Ideen an Dies ist ein vorgeschnittenes, vorgelötetes, 250 cm langes Stück EL. Sie können es direkt in einen Wechselrichter stecken und in Sekundenschnelle zum Leuchten bringen, und wenn Sie etwas Komplexeres machen möchten, schneiden Sie es nach Belieben zu und löten Sie es neu. Das Löten an EL-Draht ist ein wenig knifflig, aber zum Glück haben wir eine detaillierte Schritt-für-Schritt-Anleitung geschrieben! Zum Schneiden und Wiederlöten von EL benötigen Sie Abisolierzangen, einen Lötkolben und Lötzinn, Kupferband und Schrumpfschlauch. Ein Tool aus dritter Hand ist ebenfalls sehr nützlich. Bitte beachten Sie! EL-Band, EL-Draht und EL-Panel werden mit unterschiedlichen Verfahren hergestellt - Farbe und Helligkeit sind zwischen den verschiedenen Arten von EL-Produkten nicht konsistent. Das EL-Band passt nicht genau zum EL-Kabel oder EL-Panel, sie haben alle leicht unterschiedliche Farben.

Ab CHF 11.35*

Details

LilyPad LED Pink (5pcs)

This is a simple pack of five Pink LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up. LilyPad is a wearable e-textile technology developed by Dr. Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad piece was creatively designed with large sew tabs to allow them to be sewn into fabric. Various input, output, power and sensor boards are available. They're even washable (with special care)! Note: A portion of this sale is given back to Dr. Buechley for continued development and education in e-textiles.

CHF 6.18*

LilyPad LED Blue (5pcs)

This is a simple pack of five Blue LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up. LilyPad is a wearable e-textile technology developed by Dr. Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad piece was creatively designed with large sew tabs to allow them to be sewn into fabric. Various input, output, power and sensor boards are available. They're even washable (with special care)! Note: A portion of this sale is given back to Dr. Buechley for continued development and education in e-textiles.

CHF 6.18*