3.6mm Ash Veneered Plywood, 600mm x 300mm sheet

3.6mm Ash Veneered Plywood, 600mm x 300mm sheet
CHF 9,77 *
Contenu : 1 Pièce

Prix dont TVA plus frais de port

Délai de livraison 14 Jours ouvrés

Menge
  • KIT-32123
  • Kitronik
  • 32123
  • 2
This high quality A grade Ash Veneer Plywood Sheet (laserply) with a Chinese poplar underside...plus
Informations sur le produit "3.6mm Ash Veneered Plywood, 600mm x 300mm sheet"

This high quality A grade Ash Veneer Plywood Sheet (laserply) with a Chinese poplar underside and core is ideal for structural projects requiring a high-quality appearance and finish on the topside and panelling.

Knots or resin within the material can cause scorch marks when used on a laser cutter. These can usually be removed with fine grade wet and dry sandpaper.

Please note:

  • As wood is a natural product, there is often a crook or bow to the sheet. The natural twist might be in excess of 25mm (see below - Tolerances and Caution).
  • This product is most suitable for applications where a high quality outside surface is needed where visual aspects on the underside are not critical.

This is a 'Crown Cut' veneer with A grade topside quality.

A wood veneer is not like an artificial surface such as melamine or a laminate. It is cut from the log and therefore has it’s own unique grain, texture, and colour.

There are two different cuts that can be used in veneer production:

'Quarter Cut' are cut at 90 degrees, producing the effect of a straight grain.
'Crown Cut' are sliced through the log, producing 'Crowns'. This adds more character to the overall finish (as used in this product).
Features:

  • High quality A grade Ash Veneer laser plywood sheet (laserply).
  • Veneer thickness approximately 0.5mm.
  • Suitable for use in internal dry conditions as defined in EN 622 parts 1 and 5 and conforms to EN13986.
  • CC grade Chinese poplar underside and core.

Please Note:
Although this is A-grade Ash Veneer on the topside, the underside and core is CC grade Chinese poplar. We have used the product on our laser cutter successfully.


Contents:

  • 1 x 3.6mm Ash Veneer Plywood (laserply), 600mm x 300mm Sheet.

Dimensions:

  • Length: 600mm.
  • Width: 300mm.
  • Height: 3.6mm.
  • Veneer thickness (approximately): 0.5mm.
Liens supplémentaires vers "3.6mm Ash Veneered Plywood, 600mm x 300mm sheet"
Vidéos "3.6mm Ash Veneered Plywood, 600mm x 300mm sheet"

Eigenschaften ansehenplus
Eigenschaften "3.6mm Ash Veneered Plywood, 600mm x 300mm sheet"
niveau: cycle 2, cycle 2
fabricant: Kitronik
matière: arts
Hersteller Kitronik
Kitronik creates high quality products and resources for education and makers, and as such stock...plus
Herstellerinformation "Kitronik"
Kitronik

Kitronik creates high quality products and resources for education and makers, and as such stock an extensive range of electronic project kits, components, tools and test equipment, a wide range of materials and also e-textiles products including conductive thread.

Autres articles de Kitronik
Lire, écr. et débatt. des analyses…plus
Évaluations de clients pour "3.6mm Ash Veneered Plywood, 600mm x 300mm sheet"
Écrire une évaluation
Veuillez saisir la série de nombres dans le champ de texte suivant.

Les champs suivis d'un * sont des champs obligatoires.

Tilleul 3mm (56 pcs) Tilleul 3mm (56 pcs)
Contenu 56 Pièce (CHF 3,39 * / 1 Pièce)
CHF 190,00 *
Consommables pour découpeurs et graveurs laser de taille A4 en carton de 3,5 mm (lot de 45 Consommables pour découpeurs et graveurs laser...
Contenu 45 Pièce (CHF 1,11 * / 1 Pièce)
CHF 50,00 *
FLUX Beamo Matériau du tampon en caoutchouc FLUX Beamo Matériau du tampon en caoutchouc
Contenu 3 Pièce (CHF 18,33 * / 1 Pièce)
CHF 55,00 *
2.3mm Grey Laser Compatible Rubber A4 2.3mm Grey Laser Compatible Rubber A4
Contenu 1 Pièce
CHF 22,85 *
Acrylic 3mm Acrylic 3mm
Contenu 5 Paquet (CHF 4,34 * / 1 Paquet)
À partir de CHF 21,70 *
4mm Poplar Laser Plywood, 600mm x 300mm 4mm Poplar Laser Plywood, 600mm x 300mm
Contenu 1 Pièce
CHF 8,21 *
Derniers articles consultés