Produits de Vernier Science Education

Vernier Science Education

Vernier Software & Technology, qui fête son 35ème anniversaire en 2016, a toujours été à la pointe de l'innovation dans les technologies de mesures pour l'enseignement des sciences. Centré sur les domaines des sciences, de la technologie, de l'ingénierie et des mathématiques (en anglais, "STEM", pour "Science, Technology, Engineering and Mathematics"), Vernier se consacre au développement de moyens créatifs pour enseigner, et apprendre, les sciences et les maths en réalisant des travaux pratiques. 

Vernier crée des interfaces, des capteurs et des logiciels de représentation graphique et d'analyse, abordables et faciles à utiliser. 

Distribués dans plus de 140 pays tout autour de la planète, les produits Vernier sont utilisés de l'école élémentaire jusqu’à l'enseignement supérieur par les enseignants et les élèves.

Les solutions proposées par Vernier améliorent l'apprentissage des "STEM", facilitent la compréhension et développent la réflexion et l'esprit critique des élèves.

 

Vernier a ancré sa culture d'entreprise sur des pratiques et des règles respectueuses de l'environnement. La société offre un environnement et des conditions de travail agréables et compatibles avec la vie de famille.

Fermer filtres
 
de à
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
 
 
11 de 38
Aucun résultat trouvé pour le filtre !
Spirometer Durchlaufkopf
Spirometer Durchlaufkopf
An extra flow head eliminates the need for equipment downtime while sterilizing your original flow head. The flow head consists of a polycarbonate outer body with a stainless-steel inner mesh.
CHF 118,43 *
Spring Set
Spring Set
This accessory kit contains 6 springs that are ideal for physics experiments. The springs are 6 cm long and 0.8 cm in diameter. Three springs have a spring constant of 5 N/m and the other three have a spring constant of 15 N/m.
CHF 37,40 *
Turbidity Cuvette Standard
Turbidity Cuvette Standard
Replacement kit of 100 NTU turbidity standard and one empty glass cuvette.
CHF 78,00 *
Vernier Energy Sensor Resistor Board
Vernier Energy Sensor Resistor Board
The Vernier Resistor Board has seven 1 W 5% resistors mounted on a circuit board. Test clip holes on either side of the resistors allow for easy connections to clips on wire leads. The Vernier Resistor Board provides an ideal set of load...
Contenu 1 Pièce
CHF 35,32 *
Vernier Variable Load
Vernier Variable Load
The Vernier Variable Load is used in conjunction with the Vernier Energy Sensor to provide a range of resistive loads for projects such as wind turbines or solar panels. Students can adjust the potentiometer to provide resistances...
Contenu 1 Pièce
CHF 141,28 *
Analog Protoboard Connector
Analog Protoboard Connector
The adapter fits into a standard prototyping board or National Instruments’ ELVIS prototyping board, providing easy access to the sensor lines. Vernier analog sensors require a 5 volt source and in most cases provide a 0 – 5 volt raw...
Contenu 1 Pièce
CHF 24,00 *
DIN to BTA Adapter
DIN to BTA Adapter
This adaptor allows you to connect old DIN style sensors to LabPro, Go!Link, CBL 2, and LabQuest. One end has a female 5-pin DIN connector. The other end is a male BTA connector.
Contenu 1 Pièce
CHF 29,00 *
Digital Protoboard Connector
Digital Protoboard Connector
This connector makes it easy to wire the signal from a Vernier digital sensor into a non-Vernier interface. The adapter fits into a standard prototyping board or National Instruments’ ELVIS prototyping board, providing easy access to the...
Contenu 1 Pièce
CHF 24,00 *
Digital Sensor Cable
Digital Sensor Cable
This cable connects Vernier digital sensors to the digital (DIG) port on a Vernier interface. Compatible Sensors and Accessories Motion Detector (included with sensor) Drop Counter (included with sensor) Go!Motion Note: The Digital...
Contenu 1 Pièce
CHF 9,35 *
DIN Sensor to BTA Input Adapter
DIN Sensor to BTA Input Adapter
This adaptor allows you to connect old DIN style sensors to LabPro, Go!Link, CBL 2, and LabQuest. One end has a female 5-pin DIN connector. The other end is a male BTA connector.
Contenu 1 Pièce
CHF 10,39 *
Go! Motion to Calculator Cable
Go! Motion to Calculator Cable
This 84″ cable is used to connect a Go!Motion or CBR 2 to the I/O port of a TI graphing calculator. The cable has the small I/O plug on both ends. The cable can also be used to connect a graphing calculator to the I/O port on a LabPro,...
Contenu 1 Pièce
CHF 15,58 *
LabPro Analog Cable
LabPro Analog Cable
This cable can be used to connect your homemade analog sensors you make to Vernier interfaces. There is a BTA plug on on end and six bare wires on the other end. The cable is approximately 1.5 m long....
Contenu 1 Pièce
CHF 10,39 *
11 de 38
Derniers articles consultés