3.6mm Ash Veneered Plywood, 600mm x 300mm sheet

3.6mm Ash Veneered Plywood, 600mm x 300mm sheet
CHF 9,77 *
Contenuto: 1 Pezzo

Prezzi incl. IVA più spese di spedizione

Tempi di consegna 14 Giorni lavorativi

Menge
  • KIT-32123
  • Kitronik
  • 32123
  • 2
This high quality A grade Ash Veneer Plywood Sheet (laserply) with a Chinese poplar underside... altro
Informazione prodotto "3.6mm Ash Veneered Plywood, 600mm x 300mm sheet"

This high quality A grade Ash Veneer Plywood Sheet (laserply) with a Chinese poplar underside and core is ideal for structural projects requiring a high-quality appearance and finish on the topside and panelling.

Knots or resin within the material can cause scorch marks when used on a laser cutter. These can usually be removed with fine grade wet and dry sandpaper.

Please note:

  • As wood is a natural product, there is often a crook or bow to the sheet. The natural twist might be in excess of 25mm (see below - Tolerances and Caution).
  • This product is most suitable for applications where a high quality outside surface is needed where visual aspects on the underside are not critical.

This is a 'Crown Cut' veneer with A grade topside quality.

A wood veneer is not like an artificial surface such as melamine or a laminate. It is cut from the log and therefore has it’s own unique grain, texture, and colour.

There are two different cuts that can be used in veneer production:

'Quarter Cut' are cut at 90 degrees, producing the effect of a straight grain.
'Crown Cut' are sliced through the log, producing 'Crowns'. This adds more character to the overall finish (as used in this product).
Features:

  • High quality A grade Ash Veneer laser plywood sheet (laserply).
  • Veneer thickness approximately 0.5mm.
  • Suitable for use in internal dry conditions as defined in EN 622 parts 1 and 5 and conforms to EN13986.
  • CC grade Chinese poplar underside and core.

Please Note:
Although this is A-grade Ash Veneer on the topside, the underside and core is CC grade Chinese poplar. We have used the product on our laser cutter successfully.


Contents:

  • 1 x 3.6mm Ash Veneer Plywood (laserply), 600mm x 300mm Sheet.

Dimensions:

  • Length: 600mm.
  • Width: 300mm.
  • Height: 3.6mm.
  • Veneer thickness (approximately): 0.5mm.
Link correlati a "3.6mm Ash Veneered Plywood, 600mm x 300mm sheet"
Video "3.6mm Ash Veneered Plywood, 600mm x 300mm sheet"

Eigenschaften ansehen altro
Eigenschaften "3.6mm Ash Veneered Plywood, 600mm x 300mm sheet"
livello: Scuola elementare, Scuola media
produttore: Kitronik
materia: ed. manuale e tecnica
Hersteller Kitronik
Kitronik creates high quality products and resources for education and makers, and as such stock... altro
Herstellerinformation "Kitronik"
Kitronik

Kitronik creates high quality products and resources for education and makers, and as such stock an extensive range of electronic project kits, components, tools and test equipment, a wide range of materials and also e-textiles products including conductive thread.

Ulteriori prodotti di Kitronik
Leggere, scrivere e discutere recensioni... altro
Valutazione cliente per "3.6mm Ash Veneered Plywood, 600mm x 300mm sheet"
Scrivi una valutazione
Inserisci questi caratteri nel campo di testo sottostante.

I campi contrassegnati con * sono obbligatori.

Legno di tiglio da 3 mm (56 pezzi) Legno di tiglio da 3 mm (56 pezzi)
Contenuto 56 Pezzo (CHF 3,39 * / 1 Pezzo)
CHF 190,00 *
Taglia laser e materiali di consumo per incisori formato A4 Cartone da 3,5 mm (set di 45 pezzi) Taglia laser e materiali di consumo per...
Contenuto 45 Pezzo (CHF 1,11 * / 1 Pezzo)
CHF 50,00 *
FLUX Beamo Materiale del timbro in gomma FLUX Beamo Materiale del timbro in gomma
Contenuto 3 Pezzo (CHF 18,33 * / 1 Pezzo)
CHF 55,00 *
2.3mm Grey Laser Compatible Rubber A4 2.3mm Grey Laser Compatible Rubber A4
Contenuto 1 Pezzo
CHF 22,85 *
Acrylic 3mm Acrylic 3mm
Contenuto 5 Pacco (CHF 4,34 * / 1 Pacco)
Da CHF 21,70 *
4mm Poplar Laser Plywood, 600mm x 300mm 4mm Poplar Laser Plywood, 600mm x 300mm
Contenuto 1 Pezzo
CHF 8,21 *
Visto