Close filters
 
  •  
  •  
  •  
  •  
  •  
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
 
1 From 4
No results were found for the filter!
LilyPad Sewable Electronics Kit
LilyPad Sewable Electronics Kit
The LilyPad Sewable Electronics Kit lets you explore the wonderful world of electronic sewing (e-sewing) and e-textiles through a series of introductory projects using the LilyPad system. You’ll learn how to sew basic circuits to light...
CHF200.00 *
BUNDLE
Lilypad Conductive Thread Bobbin
Lilypad Conductive Thread Bobbin
This is 12 meters of smooth conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable electronics without the...
CHF9.87 *
BUNDLE
LilyPad Rainbow LED (6 Colors)
LilyPad Rainbow LED (6 Colors)
This is the LilyPad Rainbow LED strip, with seven LilyPad LEDs that are still attached to one another, letting you snap LEDs apart at your leisure to sew into clothing or whatever else you can dream up. The LilyPad Rainbow LED features...
CHF7.79 *
BUNDLE
LilyPad Coin Cell Battery Holder - Switched - 20mm
LilyPad Coin Cell Battery Holder - Switched - 20mm
Sure, your flashing, chip-tune playing T-shirt is really cool at the party… but at some point you need to turn it off. And yes, you could just pull the battery, or maybe you’ve even sewn a LilyPad slide switch in-line. Wouldn’t it be...
CHF4.05 *
LilyPad Temperature Sensor
LilyPad Temperature Sensor
Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output 0.5V at 0 degrees C, 0.75V at 25 C, and 10mV per degree C. Doing an analog to digital conversion on...
CHF9.87 *
Lilypad Light Sensor
Lilypad Light Sensor
The LilyPad Light Sensor is a sewable breakout board with an ALS-PT19 light sensor built in and ready to use right away. Each sensor outputs voltage between 0V and 3.3V depending on the level of ambient light shining on it. As more light...
CHF8.70 *
LilyPad ProtoSnap Plus Kit
LilyPad ProtoSnap Plus Kit
The LilyPad ProtoSnap Plus Kit is an all-in-one e-textile prototyping kit that has been specifically designed to make it as easy as possible to incorporate electronics into any of your garments or fabrics. The included LilyPad ProtoSnap...
CHF95.00 *
Needle Set
Needle Set
This set of sewing needles is a must-have when stitching together your next e-textile project. Each envelope contains three 48mm, 1.23mm thick needles and two smaller 39mm, 0.67mm thick needles. The eye of each size needle is large...
CHF3.22 *
Electro-Fashion Deluxe E-Textiles Pack
Electro-Fashion Deluxe E-Textiles Pack
This deluxe E-Textiles pack is a great way to get a little more involved with E-Textiles. We have selected a number of products from our Electro-Fashion range, including three of our ultra-slim LEDs and two separate power boards. There...
CHF29.09 *
Lilypad USB Plus
Lilypad USB Plus
This is the LilyPad USB Plus, a sewable electronics microcontroller board controlled by an ATmega32U4 with the Arduino bootloader. It has a built in power supply JST (and recharge circuit) and an on/off switch with the only extra piece...
CHF54.02 * CHF60.22 *
LilyPad ProtoSnap Plus
LilyPad ProtoSnap Plus
The LilyPad ProtoSnap Plus is a sewable electronics prototyping board that you can use to explore circuits and programming, then break apart to make an interactive fabric or wearable project. Programming the ProtoSnap Plus is easy with...
CHF101.81 *
Conductive Thread - 60g (Stainless Steel)
Conductive Thread - 60g (Stainless Steel)
This is about 330 meters of conductive thread spun from stainless steel fiber and wound on a spool. You can use it as a creative way to connect various electronics onto clothing projects. This large spool is a great way to get into...
Content 330 Running meter (CHF0.25 * / 1 Running meter)
CHF81.03 *
1 From 4
Viewed