Top seller
No results were found for the filter!
Electrode Amplifier
Use an Electrode Amplifier to collect data from almost any electrode that has a BNC connector. This includes electrodes from Vernier such as our pH electrode, or third-party electrodes, such as pH, ISE (ion-selective electrode), or ORP...
Content 1 Piece
CHF101.81 *
Analog Sensor Extension Cable
Most of our sensors have cables that are 1.5 m long. There are times, however, that you may wish to have a longer cable. The Analog Sensor Extension Cable can be used with any Vernier sensor that connects to an analog channel labeled...
Content 1 Piece
CHF23.89 *
Chest Belt Tramsmitter
You can use our Chest Belt Transmitter in conjunction with the Hand-Grip Heart Rate Monitor’s receiver for a hands-free option of measuring heart rate. This item has been discontinued and once our stock is run out we will not be able to...
CHF75.84 * CHF91.74 *
CO2 / O2 Chamber with two entrances
The BioChamber 250 is a 250 mL Nalgene bottle that can be used with a CO2 Gas Sensor and an O2 Gas Sensor to monitor gaseous carbon dioxide and oxygen levels simultaneously in a closed system. The BioChamber is useful in experiments such...
Content 1 Piece
CHF16.00 *
CO2 / O2 Respiration Chamber
The BioChamber 2000 is a 2000 mL plastic chamber that can be used with a CO2 Gas Sensor and an O2 Gas Sensor to monitor gaseous carbon dioxide and oxygen levels simultaneously in a closed system. The BioChamber 2000 is particularly...
Content 1 Piece
CHF44.00 *
250 mL Nalgene Bottle w/Lid
This is the same bottle that ships with the CO2 Gas, O2 Gas, and Ethanol Sensors.
CHF10.39 *
Cuvettes
A package of 100x 3.5 mL cuvettes (with 20 lids) is available for use with our Colorimeter (COL-BTA), SpectroVis Plus (SVIS-PL), and Vernier Spectrometer (V-SPEC).
Content 1 Piece
CHF47.79 *
Plastic Cuvettes (UV-VIS)
Package of 100 semi-microscale (1 – 1.5 mL) cuvettes and 20 lids.
CHF332.43 *
Conductivity High Range Standard
For most applications, the Conductivity Probe does not need to be calibrated. If you choose to calibrate it, you will need accurate standard solutions. The 12280 µ S/cm Standard is a good concentration to calibrate your Conductivity...
Content 1 Piece
CHF38.44 *
Conductivity Low Range Standard
For most applications, the Conductivity Probe does not need to be calibrated. If you choose to calibrate it, you will need accurate standard solutions. The 150 µ S/cm Standard is a good concentration to calibrate your Conductivity Probe...
Content 1 Piece
CHF39.48 *
Conductivity Medium Range Standard
For most applications, the Conductivity Probe does not need to be calibrated. If you choose to calibrate it, you will need accurate standard solutions. The 1413 µ S/cm Standard is a good concentration to calibrate your Conductivity Probe...
Content 1 Piece
CHF31.17 *
DO Calibration Solution
This is a replacement bottle of sodium sulfite, used for the zero dissolved oxygen calibration point. One bottle is included with the DO Probe.
Content 1 Piece
CHF8.31 *