Bambu Lab PLA Sparkle

Bambu PLA Sparkle is a next-level aesthetic filament that combines strength and sparkle. With metal particles included in its composition, Bambu PLA Sparkle adds a special sparkling look to your prints that sets them apart from the rest.

However, it is not recommended to use a 0.2 mm nozzle for printing as clogging may occur. Take your 3D printing projects to new heights with Bambu PLA Sparkle!

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

 Load and print! No more tedious setting steps.

Recommended pressure setting
Nozzle temperature                                               190 - 230°C
Heating bed temperature                                       35 - 45°C
Print speed                                                             < 250 mm/s
Drying settings                                                        55°C. 8h
Storage at                                                               < 20% RH

Physical properties
Density                                                                    1.26 g/cm3
Vicat softening temperature                                    57°C
Heat deflection temperature                                   55°C
Melting temperature                                               156°C
Melt flow index                                                        34.2 ‡ 3.3 g/10min

Mechanical properties
Tensile strength                                                      33 + 3 MPa
Elongation at break                                                11.7 ‡0.7%
Flexural modulus                                                    2310 + 140 MPa
Flexural strength                                                    63 + 4 MPa
Impact strength                                                      66.5 ‡3.6 kJ/m2