Kitronik All-in-one Robotics Board for BBC micro:bit V1 & V2

Dieser Artikel steht derzeit nicht zur Verfügung!
CHF 25.97 *

inkl. MwSt. zzgl. Versandkosten

Lieferzeit auf Anfrage

  • KIT-5641
  • Kitronik
  • 5641
  • 2
This product is end of life and will only be available as long as it is in stock.  A... mehr
Produktinformationen "Kitronik All-in-one Robotics Board for BBC micro:bit V1 & V2"

This product is end of life and will only be available as long as it is in stock.  A Replacement can be found here: KIT-5693

Take your microbit robotics builds to the next level with the Kitronik All-in-one Robotics Board for the BBC micro:bit. The All-in-one Robotics Board enables the BBC micro:bit (connected via a standard card slot connector) to drive 4 motors (or 2 stepper motors) and 8 servos. Coupled with 17 other I/O expansion points, this means the BBC micro:bit can very easily become the core of a whole variety of robotics projects.

The Robotics Board features 2 Dual H-Bridge Motor Driver ICs (capable of driving 2 standard motors or 1 stepper motor each) and 8 servo outputs (capable of driving standard and continuous rotation servos), all controlled from the BBC micro:bit using the I2C protocol via a 16-channel driver IC.

The Link header breaks out all the usable pins from the BBC micro:bit, and is designed to allow 2.54mm pitch pin header to be easily soldered into place. The 17 available I/O pins allow other input devices, such as sensors, or output devices, such as ZIP LEDs, to be added to the board. The I2C communication lines are also broken out (Pins 19 & 20), which means other I2C compatible devices can also be added to the board and controlled by the BBC micro:bit.

Power is provided via either a terminal block or servo-style connector, and the board then produces a regulated 3.3V supply which is fed into the 3V and GND connections to power the connected BBC micro:bit, removing the need to power the BBC micro:bit separately. This also provides the reference voltage for the servo signal level-shift ICs. The 3V and GND pins are also broken out on the Link header, which means external devices can also be powered.

To use the Robotics Board, the BBC micro:bit should be inserted firmly into the edge connector, either way round. If the Link header is being used, the BBC micro:bit LED display should be facing them (see PCB text relating to this).

Features:

  • An all-in-one robotics control solution for the BBC micro:bit.
  • It can drive 4 motors (or 2 stepper motors) and 8 servos.
  • All the usable pins of the microbit are broken out to a 2.54mm link header that is compatible with 2.54mm pitch pin headers.
  • The 17 available I/O pins allow other input devices, such as sensors, or output devices, such as ZIP LEDs, to be added to the board.
  • Power is provided via either a terminal block or servo-style connector.

Contains:

  • 1 x All-in-one Robotics Board for the BBC microbit.

Dimensions:

  • Length: 68mm.
  • Width: 62mm.
  • PCB Thickness: 1.6mm.
Weiterführende Links zu "Kitronik All-in-one Robotics Board for BBC micro:bit V1 & V2"
Videos "Kitronik All-in-one Robotics Board for BBC micro:bit V1 & V2"

Weitere Info "Kitronik All-in-one Robotics Board for BBC micro:bit V1 & V2"

Requires:

  • A BBC micro:bit.
  • USB Cable.

If using the breakout pads at the back of the board, you will also need:

  • Soldering Iron.
  • Solder.
  • Wire Cutters.
Eigenschaften ansehen mehr
Eigenschaften "Kitronik All-in-one Robotics Board for BBC micro:bit V1 & V2"
Bildungsstufe: Tertiäre Bildung, Zyklus 3
DataLogger Schnittstellen: BBC Micro:Bit
Fach: Robotik/Mikrokontroller, Technisches Gestalten
Hersteller Kitronik
Kitronik creates high quality products and resources for education and makers, and as such stock... mehr
Herstellerinformation "Kitronik"
Kitronik

Kitronik creates high quality products and resources for education and makers, and as such stock an extensive range of electronic project kits, components, tools and test equipment, a wide range of materials and also e-textiles products including conductive thread.

Weitere Artikel von Kitronik
Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "Kitronik All-in-one Robotics Board for BBC micro:bit V1 & V2"
Bewertung schreiben
Bitte geben Sie die Zeichenfolge in das nachfolgende Textfeld ein.

Die mit einem * markierten Felder sind Pflichtfelder.

BBC micro:bit V2 - Club Box (pack of 10) BBC micro:bit V2 - Club Box (pack of 10)
Inhalt 10 Paket(e) (CHF 28.60 * / 1 Paket(e))
CHF 286.00 *
Leitfähiges Nylon Gewebeband - 5mm Breite x 10 Meter lang Leitfähiges Nylon Gewebeband - 5mm Breite x 10...
Inhalt 10 Laufende(r) Meter (CHF 0.62 * / 1 Laufende(r) Meter)
CHF 6.23 *
Enviro:Bit Enviro:Bit
CHF 30.13 *
micro:bit Enclosure (LEGO Compatible) micro:bit Enclosure (LEGO Compatible)
Inhalt 1 Stück
CHF 4.10 *
GamePad for Micro:Bit v3.0 GamePad for Micro:Bit v3.0
Inhalt 1 Stück
CHF 30.13 *
Continuous Rotation Micro Servo - FS90R Continuous Rotation Micro Servo - FS90R
Inhalt 1 Stück
CHF 13.45 *
Servo Motor 180° mit Zubehör Servo Motor 180° mit Zubehör
Inhalt 1 Stück
CHF 11.43 *
littleBits Code Kit package littleBits Code Kit
Inhalt 1 Stück
CHF 275.00 *
Calliope mini 2.0 mit Flash-Speicher und Bluetooth® Calliope mini 2.0 mit Flash-Speicher und...
Inhalt 1 Stück
ab CHF 50.49 *
BBC micro:bit Erfinder Kit BBC micro:bit Erfinder Kit
Inhalt 1 Stück
ab CHF 46.75 *
Crocodile Leads (set of 10) Crocodile Leads (set of 10)
Inhalt 10 Paket(e) (CHF 0.51 * / 1 Paket(e))
CHF 5.09 *
Kitronik ARCADE for MakeCode Arcade Kitronik ARCADE for MakeCode Arcade
Inhalt 1 Paket(e)
CHF 41.55 *
Non-mercury Tilt Switch Non-mercury Tilt Switch
Inhalt 1 Stück
CHF 3.74 *
SPST Black 'I/O' Actuator SPST Black 'I/O' Actuator
Inhalt 1 Stück
ab CHF 0.93 *
Micro Switch w/Lever - 2 Terminal Micro Switch w/Lever - 2 Terminal
Inhalt 1 Stück
CHF 3.12 *
Panel Mount 10K potentiometer Panel Mount 10K potentiometer
Inhalt 1 Stück
CHF 2.03 *
DC Toy / Hobby Motor - 130 Size DC Toy / Hobby Motor - 130 Size
Inhalt 1 Stück
CHF 4.67 *
Servo Motor 180° mit Zubehör Servo Motor 180° mit Zubehör
Inhalt 1 Stück
CHF 11.43 *
NeoPixel Stick - 8 x 5050 RGB LED NeoPixel Stick - 8 x 5050 RGB LED
Inhalt 1 Stück
CHF 10.39 *
Solenoid (5V) Solenoid (5V)
Inhalt 1 Stück
CHF 10.28 *
10mm Diffused LED 10mm Diffused LED
Inhalt 1 Stück
ab CHF 0.20 *
Miniature 3V Vibrating Motor Miniature 3V Vibrating Motor
Inhalt 1 Stück
CHF 3.64 *
Arcade Push Button 33mm, Blue Arcade Push Button 33mm
Inhalt 1 Stück
ab CHF 1.81 *
KidWind 2V/400mA Solar Panel KidWind 2V/400mA Solar Panel
Inhalt 1 Stück
CHF 37.19 *
Elektromotor-OB Bausatz Elektromotor-OB Bausatz
Inhalt 1 Stück
ab CHF 12.30 *
Zuletzt angesehen