Kitronik micro:bit Inventors Kit - Python version - German

The Kitronik Inventor's Kit - Python version for the BBC micro:bit is a great way to get started with programming and hardware interaction with the BBC micro:bit. This Inventor's Kit contains everything you need to complete 10 experiments. To get you off to a flying start, we have included an easy-to-follow tutorial book which guides you through everything you will need to know about programming the BBC micro:bit. You don't need any experience with programming as the tutorial book will guide you every step of the way. You'll be programming and creating circuits in no time!

The tutorial offers step-by-step guides to all 10 experiments. Experiments 1 - 6 are coded with MakeCode Blocks and experiments 7 - 10 are coded with the MakeCode Python editor.

The BBC micro:bit has a selection of pins that are located on the bottom edge of its PCB. By using our specially designed Edge Connector Board for the BBC micro:bit in conjunction with the breadboard, it is easy to use these pins to connect additional components to the BBC micro:bit.

Note:

• This kit requires assembly.
• This kit does not include a BBC microbit.
• If you purchase a microbit separately you may also need to purchase a Battery Cage and a USB Cable, depending on which microbit option you purchase.

Features:

• No soldering is required - build your first circuit in minutes!
• Make 10 experiments included in the provided step-by-step tutorial book.
• As your skill grows, progress from Blocks to Python all within the MakeCode environment.
• Experiments 1 - 6 are blocks orientated.
• Experiments 7 - 10 are now completed with Python.
• All parts are included to conduct the 10 experiments (listed below).
• Breaks out 21 accessible pins from the BBC micro:bit using the Edge Connector Board for the BBC micro:bit (included).
• Small Prototype Breadboard included for fast prototyping.

Contents:
Every single pack contains;

• 1 x Mounting Plate.
• 1 x Potentiometer - Vertical Type (finger adjust) 100K.
• 1 x Finger Adjust Spindle.
• 1 x Sticky Fixer for Battery Pack.
• 1 x Small Prototype Breadboard.
• 1 x Terminal Connector.
• 4 x Push Switch.
• 1 x Motor.
• 1 x Transistor.
• 2 x Red 5mm LED.
• 2 x Orange 5mm LED.
• 2 x Yellow 5mm LED.
• 2 x Green 5mm LED.
• 1 x RGB 5mm LED.
• 1 x Fan Blade.
• 5 x 2.2KΩ Resistor.
• 5 x 10KΩ Resistor.
• 5 x 47Ω Resistor.
• 1 x Edge Connector Breakout Board for BBC micro:bit.
• 10 x Male to Male Jumper Wires.
• 10 x Male to Female Jumper Wires.
• 1 x 470uF Electrolytic Capacitor.
• 1 x Piezo Element Buzzer.
• 2 x Pan Head M3 Machine Screw.
• 1 x Phototransistor.

Requires:

• 1 x BBC micro:bit or BBC micro:bit V2.
• 1 x Phillips Screwdriver.
• 1 x Terminal Block Screwdriver.
• 1 x Micro USB Cable.