4mm American Maple Veneered MDF 300mm x 200mm Sheet

4mm American Maple Veneered MDF 300mm x 200mm Sheet
CHF 3.64 *
Inhalt: 1 Stück

inkl. MwSt. zzgl. Versandkosten

In der Regel an Lager, Lieferzeit ca. 1-3 Werktage

Menge
  • KIT-32119
  • Kitronik
  • 32119
  • 2
High-quality A/B grade American Maple MDF panel measuring 300mm x 200mm. Ideal for structural... mehr
Produktinformationen "4mm American Maple Veneered MDF 300mm x 200mm Sheet"

High-quality A/B grade American Maple MDF panel measuring 300mm x 200mm. Ideal for structural projects requiring a high-quality appearance and finish on both the topside and panelling. Suitable for laser cutting.

This MDF panel is veneered on both faces of the sheet: A grade veneer on the front and B grade on the reverse.

Please note:
As wood is a natural product, there is often a crook or bow to the sheet. The natural twist might be in excess of 10mm (see below - Tolerances and Caution) .
A wood veneer is not like an artificial surface such as melamine or a laminate. It is cut from the log and therefore has its own unique grain, texture, and colour.

A Grade Veneer is a very high-quality grading (typically the best you will see). The surface of the material will be consistent in appearance with no large variations in colour. Small pin knots are allowed and these would typically be only a few mm in diameter. This grade veneer is on the topside of this MDF sheet.

The B Grade Veneer underside shows the natural look of the veneer. There will be changes in colour that show the grain pattern. Sound, smooth knots are allowed and these will typically be under 15mm to 35mm in diameter (depending on the countries grading rules). The surface should normally be free from open knots and plugs. The material should be suitable for paint/stain or a lacquered finish.

There are two different cuts that can be used in veneer production:

'Quarter Cut' are cut at 90 degrees, producing the effect of a straight grain.
'Crown Cut' are sliced through the log, producing 'Crowns' and adding more character to the finish (as used on this product).
This product conforms to E1 (low) formaldehyde levels and is often described as 'Laser Grade' MDF but there is no official classification for this. We believe that E1 conforming MDF is the safest and best MDF for using in a laser cutter.

Features:
A/B grade American Maple finish.
Veneer thickness approximately 0.5mm.
High-quality wood and veneer, for great-looking finishes.
MDF core.
Suitable for use in internal dry conditions as defined in EN 622 parts 1 and 5 and conforms to EN13986.
Low formaldehyde emissions.
Contents:
1 x 4mm American Maple MDF, 300mm x 200mm Sheet.
Dimensions:

  • Length: 300mm.
  • Width: 200mm.
  • Height: 4mm.
  • Veneer thickness (approximately): 0.5mm.
Weiterführende Links zu "4mm American Maple Veneered MDF 300mm x 200mm Sheet"
Videos "4mm American Maple Veneered MDF 300mm x 200mm Sheet"

Eigenschaften ansehen mehr
Eigenschaften "4mm American Maple Veneered MDF 300mm x 200mm Sheet"
Material Grosse: Beamo, M1
Type: Wood
Tiefe: 4.0 mm
Hersteller Kitronik
Kitronik creates high quality products and resources for education and makers, and as such stock... mehr
Herstellerinformation "Kitronik"
Kitronik

Kitronik creates high quality products and resources for education and makers, and as such stock an extensive range of electronic project kits, components, tools and test equipment, a wide range of materials and also e-textiles products including conductive thread.

Weitere Artikel von Kitronik
Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "4mm American Maple Veneered MDF 300mm x 200mm Sheet"
Bewertung schreiben
Bitte geben Sie die Zeichenfolge in das nachfolgende Textfeld ein.

Die mit einem * markierten Felder sind Pflichtfelder.

3,5mm Karton - 297mm x 210mm (45 Stück) 3,5mm Karton - 297mm x 210mm (45 Stück)
Inhalt 45 Stück (CHF 1.02 * / 1 Stück)
CHF 46.00 *
FLUX Gummiplatte - Rubber Stamp FLUX Gummiplatte - Rubber Stamp
Inhalt 3 Stück (CHF 18.33 * / 1 Stück)
CHF 55.00 *
AD Base 2 Oracle AD Base 2 Oracle
Inhalt 1 Stück
CHF 3'224.50 *
2.3mm Grey Laser Compatible Rubber A4 2.3mm Grey Laser Compatible Rubber A4
Inhalt 1 Stück
CHF 22.85 *
1mm Laser Cork, 600mm x 400mm sheet 1mm Laser Cork, 600mm x 400mm sheet
Inhalt 1 Stück
CHF 5.71 *
Acrylic 3mm Acrylic 3mm
Inhalt 5 Paket(e) (CHF 4.34 * / 1 Paket(e))
ab CHF 21.70 *
BUNDLE
BBC micro:bit V2 - Kitronik Starter Kit BBC micro:bit V2 - Kitronik Starter Kit
Inhalt 1 Stück
CHF 36.85 *
BUNDLE
Interaktive Wand Interaktive Wand
Inhalt 1 Paket(e)
CHF 61.29 *
Bee-Bot Matte "Belebte Strasse" Bee-Bot Matte "Belebte Strasse"
Inhalt 1 Stück
CHF 49.86 *
Zuletzt angesehen